74HC147 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 23

Technical content

Product specification Supersedes data of 1997 Aug 26

2003 Oct 30

74HC14; 74HCT14 Hex inverting Schmitt trigger

2003 Oct 30 2

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14

FEATURES

  • Applications: – Wave and pulse shapers – Astable multivibrators – Monostable multivibrators.
  • Complies with JEDEC standard no. 7A
  • ESD protection: HBM EIA/JESD22-A114-A exceeds 2000 V MM EIA/JESD22-A115-A exceeds 200 V.
  • Specified from−40 to +85°C and −40 to +125°C.

DESCRIPTION

The 74HC14 and 74HCT14 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC14 and 74HCT14 provide six inverting buffers with Schmitt-trigger action. They are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. QUICK REFERENCE DATA GND = 0 V; T amb =2 5°C; tr = tf= 6 ns Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW): PD =C PD × VCC 2 × fi× N+ Σ(CL × VCC 2 × fo) where: fi= input frequency in MHz; fo = output frequency in MHz; C L = output load capacitance in pF; VCC = supply voltage in Volts; N = total load switching outputs; Σ(C L × VCC 2 × fo) = sum of the outputs. 2. For type 74HC14 the condition is VI= GND to VCC . For type 74HCT14 the condition is VI= GND to VCC − 1.5 V. SYMBOL PARAMETER CONDITIONS TYPICAL UNIT HC HCT tPHL /tPLH propagation delay nA to nY C L = 15 pF; VCC = 5 V 1 21 7n s C I input capacitance 3.5 3.5 pF C PD power dissipation capacitance per gate notes 1 and 2 7 8 pF

2003 Oct 30 3

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 FUNCTION TABLE Note 1. H = HIGH voltage level; L = LOW voltage level.

ORDERING INFORMATION

TEMPERATURE RANGE PINS PACKAGE MATERIAL CODE 74HC14D −40 to +125°C 14 SO14 plastic SOT108-1 74HCT14D −40 to +125°C 14 SO14 plastic SOT108-1 74HC14DB −40 to +125°C 14 SSOP14 plastic SOT337-1 74HCT14DB −40 to +125°C 14 SSOP14 plastic SOT337-1 74HC14N −40 to +125°C 14 DIP14 plastic SOT27-1 74HCT14N −40 to +125°C 14 DIP14 plastic SOT27-1 74HC14PW −40 to +125°C 14 TSSOP14 plastic SOT402-1 74HCT14PW −40 to +125°C 14 TSSOP14 plastic SOT402-1 74HC14BQ −40 to +125°C 14 DHVQFN14 plastic SOT762-1 74HCT14BQ −40 to +125°C 14 DHVQFN14 plastic SOT762-1 PIN SYMBOL DESCRIPTION 1 1A data input 2 1Y data output 3 2A data input 4 2Y data output 5 3A data input 6 3Y data output

7 GND ground (0 V)

2003 Oct 30 4

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 handbook, halfpage MNA839 7 8 GND 4Y VCC Fig.1 Pin configuration. handbook, halfpage 11 4 GND (1) 1A VCC GNDTop view 4Y MBL760 Fig.2 Pin configuration DHVQFN14. (1) The die substrate is attached to this pad using conductive die attach material. It can not be used as a supply pin or input. handbook, halfpage MNA840 1A 1Y1 2 2A 2Y3 4 3A 3Y5 6 4A 4Y9 8 5A 5Y11 10 6A 6Y13 12 Fig.3 Logic symbol. handbook, halfpage MNA841 1011 1213 Fig.4 IEC logic symbol.

2003 Oct 30 5

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 handbook, halfpage MNA842 1A 1Y1 2 2A 2Y3 4 3A 3Y5 6 4A 4Y9 8 5A 5Y11 10 6A 6Y13 12 Fig.5 Functional diagram. handbook, halfpage MNA843 A Y Fig.6 Logic diagram (one Schmitt trigger).

2003 Oct 30 6

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 RECOMMENDED OPERATING CONDITIONS LIMITING VALUES In accordance with the Absolute Maximum System (IEC 60134); voltages are referenced to GND (ground = 0 V). Notes 1. For DIP14 packages: above 70°C the value of PD derates linearly with 12 mW/K. 2. For SO14 packages: above 70°C the value of PD derates linearly with 8 mW/K. For (T)SSOP14 packages: above 60°C the value of PD derates linearly with 5.5 mW/K. For DHVQFN14 packages: above 60°C the value of PD derates linearly with 4.5 mW/K. SYMBOL PARAMETER CONDITIONS 74HC14 74HCT14 UNIT VI input voltage 0 − VCC 0 − VCC V VO output voltage 0 − VCC 0 − VCC V Tamb operating ambient temperature see DC and AC characteristics per device SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT V CC supply voltage −0.5 +7 V IIK input diode current V I< −0.5 V or VI>V CC + 0.5 V −± 20 mA IOK output diode current V O < −0.5 V or VO >V CC + 0.5 V −± 20 mA IO output source or sink current −0 . 5V<VO <V CC + 0.5 V −± 25 mA ICC ;IGND VCC or GND current − 50 mA Tstg storage temperature −65 +150 °C Ptot power dissipation T amb = −40 to +125°C DIP14 packages; note 1 − 750 mW Other packages; note 2 − 500 mW

2003 Oct 30 7

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 DC CHARACTERISTICS Type 74HC14 At recommended operating conditions; voltages are referenced to GND (ground=0V ) . SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. (1) MAX. UNIT OTHER V CC (V) Tamb =2 5°C VOH HIGH-level output voltage VI=V IH or VIL IO = −20 µA 2.0 1.9 2.0 − V IO = −20 µA 4.5 4.4 4.5 − V IO = −20 µA 6.0 5.9 6.0 − V IO = −4.0 mA 4.5 3.98 4.32 − V IO = −5.2 mA 6.0 5.48 5.81 − V VOL LOW-level output voltage VI=V IH or VIL IO =2 0µA 2.0 − 0 0.1 V IO =2 0µA 4.5 − 0 0.1 V IO =2 0µA 6.0 − 0 0.1 V IO = 4.0 mA 4.5 − 0.15 0.26 V IO = 5.2 mA 6.0 − 0.16 0.26 V ILI input leakage current VI=V CC or GND 6.0 −− 0.1 µA ICC quiescent supply current VI=V CC or GND; IO = 0 6.0 −− 2.0 µA Tamb = −40 to +85°C VOH HIGH-level output voltage VI=V IH or VIL IO = −20 µA 2.0 1.9 −− V IO = −20 µA 4.5 4.4 −− V IO = −20 µA 6.0 5.9 −− V VOL LOW-level output voltage VI=V IH or VIL IO =2 0µA 2.0 −− 0.1 V IO =2 0µA 4.5 −− 0.1 V IO =2 0µA 6.0 −− 0.1 V IO = 4.0 mA 4.5 −− 0.33 V IO = 5.2 mA 6.0 −− 0.33 V ILI input leakage current VI=V CC or GND 6.0 −− 1.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 6.0 −− 20 µA

2003 Oct 30 8

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 Note 1. All typical values are measured at Tamb =2 5°C. Tamb = −40 to +125°C VOH HIGH-level output voltage VI=V IH or VIL IO = −20 µA 2.0 1.9 −− V IO = −20 µA 4.5 4.4 −− V IO = −20 µA 6.0 5.9 −− V VOL LOW-level output voltage VI=V IH or VIL IO =2 0µA 2.0 −− 0.1 V IO =2 0µA 4.5 −− 0.1 V IO =2 0µA 6.0 −− 0.1 V IO = 4.0 mA 4.5 −− 0.4 V IO = 5.2 mA 6.0 −− 0.4 V ILI input leakage current VI=V CC or GND 6.0 −− 1.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 6.0 −− 40 µA SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. (1) MAX. UNIT OTHER V CC (V)

2003 Oct 30 9

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 Type 74HCT14 At recommended operating conditions; voltages are referenced to GND (ground=0V ) . Note 1. All typical values are measured at Tamb =2 5°C. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. (1) MAX. UNIT OTHER V CC (V) Tamb =2 5°C VOH HIGH-level output voltage VI=V IH or VIL IO = −20 µA 4.5 4.4 4.5 − V IO = −4.0 mA 4.5 3.98 4.32 − V VOL LOW-level output voltage VI=V IH or VIL IO =2 0µA 4.5 − 0 0.1 V IO = 4.0 mA 4.5 − 0.15 0.26 V ILI input leakage current VI=V CC or GND 5.5 −− 0.1 µA ICC quiescent supply current VI=V CC or GND; IO =0 5.5 −− 2.0 µA ΔICC additional supply current per input VI=V CC − 2.1 V; IO = 0 4.5 to 5.5 − 30 108 µA Tamb = −40 to +85°C VOH HIGH-level output voltage VI=V IH or VIL IO = −20 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =2 0µA 4.5 −− 0.1 V IO = 4.0 mA 4.5 −− 0.33 V ILI input leakage current VI=V CC or GND 5.5 −− 1.0 µA ICC quiescent supply current VI=V CC or GND; IO =0 5.5 −− 20 µA ΔICC additional supply current per input VI=V CC − 2.1 V; IO = 0 4.5 to 5.5 −− 135 µA Tamb = −40 to +125°C VOH HIGH-level output voltage VI=V IH or VIL IO = −20 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =2 0µA 4.5 −− 0.1 V IO = 4.0 mA 4.5 −− 0.4 V ILI input leakage current VI=V CC or GND 5.5 −− 1.0 µA ICC quiescent supply current VI=V CC or GND; IO =0 5.5 −− 40 µA ΔICC additional supply current per input VI=V CC − 2.1 V; IO = 0 4.5 to 5.5 −− 147 µA

2003 Oct 30 10

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 TRANSFER CHARACTERISTICS Type 74HC At recommended operating conditions; voltages are referenced to GND (ground=0V ) . Note 1. All typical values are measured at Tamb =2 5°C. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS V CC (V) Tamb =2 5°C; note 1 VT+ positive-going threshold Figs 7 and 8 2.0 0.7 1.18 1.5 V 4.5 1.7 2.38 3.15 V 6.0 2.1 3.14 4.2 V V T− negative-going threshold Figs 7 and 8 2.0 0.3 0.52 0.90 V 4.5 0.9 1.40 2.00 V 6.0 1.2 1.89 2.60 V VH hysteresis (VT+ − VT−) Figs 7 and 8 2.0 0.2 0.66 1.0 V 4.5 0.4 0.98 1.4 V 6.0 0.6 1.25 1.6 V T amb = −40 to +85°C VT+ positive-going threshold Figs 7 and 8 2.0 0.7 − 1.5 V 4.5 1.7 − 3.15 V 6.0 2.1 − 4.2 V VT− negative-going threshold Figs 7 and 8 2.0 0.3 − 0.90 V 4.5 0.90 − 2.00 V 6.0 1.20 − 2.60 V VH hysteresis (VT+ − VT−) Figs 7 and 8 2.0 0.2 − 1.0 V 4.5 0.4 − 1.4 V 6.0 0.6 − 1.6 V Tamb = −40 to +125°C VT+ positive-going threshold Figs 7 and 8 2.0 0.7 − 1.5 V 4.5 1.7 − 3.15 V 6.0 2.1 − 4.2 V VT− negative-going threshold Figs 7 and 8 2.0 0.30 − 0.90 V 4.5 0.90 − 2.00 V 6.0 1.2 − 2.60 V VH hysteresis (VT+ − VT−) Figs 7 and 8 2.0 0.2 − 1.0 V 4.5 0.4 − 1.4 V 6.0 0.6 − 1.6 V

2003 Oct 30 11

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 Family 74HCT At recommended operating conditions: voltages are referenced to GND (ground=0V ) Note 1. All typical values are measured at Tamb =2 5°C. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS V CC (V) Tamb =2 5°C; note 1 VT+ positive-going threshold Figs 7 and 8 4.5 1.2 1.41 1.9 V 5.5 1.4 1.59 2.1 V VT− negative-going threshold Figs 7 and 8 4.5 0.5 0.85 1.2 V 5.5 0.6 0.99 1.4 V VH hysteresis (VT+ − VT−) Figs 7 and 8 4.5 0.4 0.56 − V 5.5 0.4 0.60 − V Tamb = −40 to +85°C VT+ positive-going threshold Figs 7 and 8 4.5 1.2 − 1.9 V 5.5 1.4 − 2.1 V VT− negative-going threshold Figs 7 and 8 4.5 0.5 − 1.2 V 5.5 0.6 − 1.4 V VH hysteresis (VT+ − VT−) Figs 7 and 8 4.5 0.4 −− V 5.5 0.4 −− V Tamb = −40 to +125°C VT+ positive-going threshold Figs 7 and 8 4.5 1.2 − 1.9 V 5.5 1.4 − 2.1 V VT− negative-going threshold Figs 7 and 8 4.5 0.5 − 1.2 V 5.5 0.6 − 1.4 V VH hysteresis (VT+ − VT−) Figs 7 and 8 4.5 0.4 −− V 5.5 0.4 −− V

2003 Oct 30 12

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 AC CHARACTERISTICS Type 74HC GND = 0 V; tf= tf= 6 ns; CL =5 0p F Note 1. All typical values are measured at Tamb =2 5°C. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS V CC (V) Tamb =2 5°C; note 1 tPHL /tPLH propagation delay nA to nY see Fig.9 2.0 − 41 125 ns 4.5 − 15 25 ns 6.0 − 12 21 ns tTHL /tTLH output transition time see Fig.9 2.0 − 19 75 ns 4.5 − 71 5 n s 6.0 − 61 3 n s Tamb = −40 to +85°C tPHL /tPLH propagation delay nA to nY see Fig.9 2.0 −− 155 ns 4.5 −− 31 ns 6.0 −− 26 ns tTHL /tTLH output transition time see Fig.9 2.0 −− 95 ns 4.5 −− 19 ns 6.0 −− 15 ns Tamb = −40 to +125°C tPHL /tPLH propagation delay nA to nY see Fig.9 2.0 −− 190 ns 4.5 −− 38 ns 6.0 −− 32 ns tTHL /tTLH output transition time see Fig.9 2.0 −− 110 ns 4.5 −− 22 ns 6.0 −− 19 ns

2003 Oct 30 13

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 Type 74HCT GND = 0 V; tr =tf= 6 ns; CL =5 0p F Note 1. All typical values are measured at Tamb =2 5°C. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS V CC (V) Tamb =2 5°C; note 1 tPHL /tPLH propagation delay nA to nY see Fig.9 4.5 − 20 34 ns tTHL /tTLH output transition time see Fig.9 4.5 − 71 5 n s Tamb = −40 to +85°C tPHL /tPLH propagation delay nA to nY see Fig.9 4.5 43 −− ns tTHL /tTLH output transition time see Fig.9 4.5 19 −− ns Tamb = −40 to +125°C tPHL /tPLH propagation delay nA to nY see Fig.9 4.5 −− 51 ns tTHL /tTLH output transition time see Fig.9 4.5 −− 22 ns TRANSFER CHARACTERISTIC WAVEFORMS MNA844 VO VIVH VT+VT− Fig.7 Transfer characteristic. handbook, halfpage MNA845 VO VI VH VT+ VT− Fig.8 The definitions of VT+,VT− and VH . VT+ and VT− are between limits of 20% and 70%.

2003 Oct 30 14

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 handbook, halfpage 0 2.0 0.4 0.8 1.2 1.6 MNA846 ICC (mA) VI (V) Fig.9 Typical 74HC14 transfer characteristics. VCC =2V . handbook, halfpage 1.0 0.2 0.4 0.6 0.8 12 3 4 MNA847 ICC (mA) VI (V) Fig.10 Typical 74HC14 transfer characteristics. VCC = 4.5 V. handbook, halfpage 0 6.0 ICC (mA) VI (V) 1.0 0.2 0.4 0.6 0.8 1.2 2.4 3.6 4.8 MNA848 Fig.11 Typical 74HC14 transfer characteristics. VCC =6V . handbook, halfpage 1.5 0.3 0.6 0.9 1.2 12 3 4 MNA849 ICC (mA) VI (V) Fig.12 Typical 74HCT14 transfer characteristics. VCC = 4.5 V.

2003 Oct 30 15

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 handbook, halfpage 01 23 6 1.8 0.6 0.3 1.2 1.5 0.9 MNA850 ICC (mA) VI (V) Fig.13 Typical 74HCT14 transfer characteristics. VCC = 5.5 V. AC WAVEFORMS handbook, halfpage MNA722 tPLHtPHL VMVM 90% 10% VM VM nY output nA input VI GND VOH VOL tTLHtTHL Fig.14 The input (nA) to output (nY) propagation delays and output transitions times. 74HC14: VM = 50%; VI= GND to VCC . 74HCT14: VM = 1.3 V; VI= GND to 3.0 V.

2003 Oct 30 16

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 handbook, full pagewidth open GND 50 pF VCC VCC VI VO MNA742 D.U.T. C L = R T R L = 1 kW PULSE GENERATOR Fig.15 Load circuitry for switching times. TEST S1 tPLH /tPHL open tPLZ /tPZL VCC tPHZ /tPZH GND Definitions for test circuit: R L = Load resistor. C L = load capacitance including jig and probe capacitance. R T = termination resistance should be equal to the output impedance Zo of the pulse generator.

2003 Oct 30 17

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14

APPLICATION INFORMATION

The slow input rise and fall times cause additional power dissipation. This can be calculated using the following formula: P ad =fi× (tr × ICC(AV) +tf× ICC(AV))× VCC . Where: Pad = additional power dissipation (µW); fi= input frequency (MHz); tr = input rise time (µs); 10% to 90%; tf= input fall time (µs); 10% to 90%; ICC(AV) = average additional supply current (µA). ICC(AV) differs with positive or negative input transitions, as shown in Figs 16 and 17. For 74HC/HCT14 used in a relaxation oscillator circuit, see Fig.18. Note to application information All values given are typical unless otherwise specified. handbook, halfpage 0246 400 300 100 200 MNA852 ICC(AV) (mA) VCC (V) positive - going edge negative - going edge negative - going Fig.16 Average ICC for 74HC14 Schmitt trigger devices. Linear change of VI between 0.1VCC to 0.9VCC handbook, halfpage 0246 400 300 100 200 MNA853 VCC (V) positive - going egde positive - going edge negative - going egde negative - going edge ICC(AV) (mA) Fig.17 Average ICC for HCT Schmitt trigger devices. Linear change of VIbetween 0.1VCC to 0.9VCC . handbook, halfpage MNA854 R C Fig.18 Relaxation oscillator using 74HC/HCT14. 74HC14 : f 1 T--- 1 74HCT14 : f 1 T--- 1

2003 Oct 30 18

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 PACKAGE OUTLINES UNIT A max. A 1 A 2 A 3 bp cD (1) E (1) (1)eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 8.75 8.55 4.0 3.8 1.27 6.2 5.8 0.7 0.6 0.7 0.3 8 o o 0.25 0.1 DIMENSIONS (inch dimensions are derived from the original mm dimensions) Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.0 0.4 SOT108-1 X w M q AA 1 A 2 bp D H E Lp Q detail X E Z e c L v M A (A )3 A y 076E06 MS-012 pin 1 index 0.069 0.010 0.004 0.057 0.049 0.01 0.019 0.014 0.0100 0.0075 0.35 0.34 0.16 0.15 0.05 1.05 0.0410.244 0.228 0.028 0.024 0.028 0.0120.01 0.25 0.01 0.0040.039 0.016 99-12-27 03-02-19 0 2.5 5 mm scale SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1

2003 Oct 30 19

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 UNIT A max. 1 2 (1) (1)b1 cD (1)ZEe M HL REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches DIMENSIONS (inch dimensions are derived from the original mm dimensions) SOT27-1 99-12-27 03-02-13 A min. A max. b max.wM Ee1 1.73 1.13 0.53 0.38 0.36 0.23 19.50 18.55 6.48 6.20 3.60 7.80 10.0 0.068 0.044 0.021 0.015 0.77 0.73 0.014 0.009 0.26 0.24 0.14 0.31 0.39 050G04 MO-001 SC-501-14 M H c (e )1 M E A L seating plane w M e D A 2 Z b E pin 1 index 0 5 10 mm scale Note 1. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included. DIP14: plastic dual in-line package; 14 leads (300 mil) SOT27-1

2003 Oct 30 20

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 UNIT A 1 A 2 A 3 bp cD (1) E (2) (1)eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.72 0.38 o o0.13 0.10.21 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 SOT402-1 MO-153 99-12-27 03-02-18 w M bp D Z e 0.25 14 8 q AA 1 A 2 Lp Q detail X L (A )3 H E E c v M A XA y 0 2.5 5 mm scale TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1 A max. 1.1 pin 1 index

2003 Oct 30 21

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 terminal 1 index area 0.51 A 1 EhbUNIT ye 0.2 c REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 3.1 2.9 D h 1.65 1.35 2.6 2.4 1.15 0.85 20.30 0.18 0.05 0.00 0.05 0.1 DIMENSIONS (mm are the original dimensions) 0.5 0.3 L 0.1 v 0.05 w 0 2.5 5 mm scale SOT762-1 DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 14 terminals; body 2.5 x 3 x 0.85 mm A (1) max. A c detail X yy1 Ce L Eh D h e b 13 9 X D E C B A 02-10-17 03-01-27 terminal 1 index area AC C Bv M w M E (1) Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. D (1)

2003 Oct 30 22

Philips Semiconductors Product specification Hex inverting Schmitt trigger 74HC14; 74HCT14 DATA SHEET STATUS Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. LEVEL DATA SHEET STATUS (1) PRODUCT STATUS (2)(3) DEFINITION I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.

© Koninklijke Philips Electronics N.V. 2003 SCA75 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 Printed in The Netherlands 613508/03/pp23 Date of release:2003 Oct 30 Document order number: 9397 750 10497