74F723A PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 14
Technical content
/C0109 /C0110 /C0114 74F723A Quad 2-to-1 data selector multiplexer (3-State) 74F723-1 Quad 2-to-1 data selector multiplexer with 30Ω equivalent output termination impedance (3-State) 74F725A Quad 3-to-1 data selector multiplexer (3-State) 74F725-1 Quad 3-to-1 data selector multiplexer with 30Ω equivalent output termination impedance (3-State) Product specification IC15 Data Handbook
1990 Dec 13
Philips Semiconductors Product specification 74F723A/74F723–1/ 74F725A/74F725–1Multiplexers 74F723A Quad 3-to-1 Data Selector Multiplexer (3-State) 74F723-1 Quad 3-to-1 Data Selector Multiplexer with 30 Equivalent Output Termination Impedance (3-State) 74F725A Quad 4-to-1 Data Selector Multiplexer 74F725-1 Quad 4-to-1 Data Selector Multiplexer with 30 Equivalent Output Termination Impedance
21990 Dec 13 853-1369 01257
FEATURES for 74F723A/74F723-1
- Consists of four 3-to-1 Multiplexers
- High impedance PNP base inputs for reduced loading (20µA in High and Low states)
- Inverting or non-inverting data path capability by an inverting (INV) input
- Designed for address multiplexing of dynamic RAM and other
applications
- Multiple side pins for VCC and GND to reduce lead inductance (improves speed and noise immunity)
- 3-State outputs sink 64mA (74F723A only)
- 30 termination impedance on each output – 74F723-1 FEATURES for 74F725A/74F725-1
- Consists of four 4-to-1 Multiplexers
- High impedance PNP base inputs for reduced loading (20µA in High and Low states)
- Equivalent to two 74F253s without 3-State
- Outputs sink 64mA (74F725A only)
- 30 termination impedance on each output – 74F725-1
DESCRIPTION
The 74F723A/74F723-1 consist of four 3-to-1 multiplexers designed for address multiplexing of dynamic RAMs and other multiplexing applications. Select (S0, S1) inputs control which line is to be selected, as defined in the Function Table for 74F723A/74F723-1. When the invering input (INV) is Low, the input data path is inverted. To improve speed and noise immunity, VCC and GND side pins are used. The 3-State outputs source 15mA and sink 64mA. The 74F723-1 is the same as 74F723A except that it has a 30 temination impedance on each output to reduce line noise and the 3-State outputs sink 5mA. The 74F725A/74F725-1 consist of four 4-to1 multiplexers designed for general multiplexing purpose. The select (S0, S1) inputs control which line is to be selected, as defined in the Function Table for 74F725A/725-1. The outputs source 15mA and sink 64mA. The 74F725-1 is the same as the 74F725A except that it has a 30 termination impedance on each output to reduce line noise and the outputs sink 5mA. TYPE TYPICAL PROPAGATION DELAY TYPICAL SUPPLY CURRENT (TOTAL) 74F723A 5.5ns 25mA 74F723-1 7.0ns 26mA 74F725A 5.5ns 20mA 74F725-1 6.5ns 20mA
ORDERING INFORMATION
VCC = 5V ± 10% Tamb = 0° C to +70°C PKG DWG 20-Pin Plastic SlimN74F723AN, N74F723-1N, SOT222 1DIP (300 mil) N74F725AN, N74F725-1N SOT222 -1
24 Pin Plastic SOL N74F723AD, N74F723-1D, SOT137 124-Pin Plastic SOL ,,
N74F725AD, N74F725-1D SOT137 -1 INPUT AND OUTPUT LOADING AND FAN-OUT TABLE TYPE PINS DESCRIPTION 74F(U.L.) HIGH/LOW LOAD VALUE HIGH/LOW Dna, Dnb, Dnc Data inputs 1.0/0.066 20µA/40µA 74F723A/ S0, S1 Select inputs 1.0/0.033 20µA/20µA 74F723-1 OE Output Enable input 1.0/0.033 20µA/20µA INV Output inverting input 1.0/0.033 20µA/20µA 74F723A Q0 - Q3 Data outputs for 74F723A 750/106.7 15mA/64mA 74F723-1 Q0 - Q3 Data outputs for 74F723-1 750/8.33 15mA/5mA 74F725A/ Dna, Dnb, Dnc, Dnd Data inputs 1.0/0.066 20µA/40µA 74F725-1 S0, S1 Select inputs 1.0/0.033 20µA/20µA 74F725A Q0 - Q3 Data outputs 750/106.7 15mA/64mA 74F725-1 Q0 - Q3 Data outputs 750/8.33 15mA/5mA
Philips Semiconductors Product specification 74F723A/74F723–1/ 74F725A/74F725–1Multiplexers
1990 Dec 13 3
PIN CONFIGURATION – 74F723A/74F723-1 SF01226 1312 1 OE INV D1a D1b VCC D2a D2b D2c D0a D0b D0c GND GND D3a D3b D3c D1c VCC PIN CONFIGURATION – 74F725A/74F725-1 1312 1D0a D0b D1a D1b D1d D2a D2b D2c D2d D3d SO D0c D0d GND D3a D3b D3c D1c VCC SF01227 LOGIC SYMBOL – 74F723A/74F723-1 Q1Q0 1 2 3 2 22 12 01 71 61 51 0 Q2 Q3 INV VCC = Pin 18, 19 GND = Pin 6, 7 SF01228 11 12 D0a D0b D1a D1b D2a D2b D3a D3bD0c D1c D2c D3c OE LOGIC SYMBOL – 74F725A/74F725-1 VCC = Pin 18 GND = Pin 7 D0a D0b D1a D1b D2a D2b D3a Q1Q0 1 2 3 4 22 21 20 19 17 16 Q2 Q3 D3b D0c D1c D2c D3c 15 14 10 11 12 SF01229 D0d D1d D2d D3d LOGIC SYMBOL (IEEE/IEC) – 74F723A/74F723-1 SF01230 MUXG1 EN M LOGIC SYMBOL (IEEE/IEC) – 74F725A/74F725-1 SF01231 MUX
Philips Semiconductors Product specification 74F723A/74F723–1/ 74F725A/74F725–1Multiplexers
1990 Dec 13 4
LOGIC DIAGRAM – 74F723A/74F723-1 OE INV D0a D0b D0c D1a D1b D1c D2a D2b D2c D3a D3b D3c Q04 VCC = Pin 18, 19 GND = Pin 6, 7 SF01232 FUNCTION TABLE – 74F723A/74F723-1 INPUTS OUTPUT S0 S1 INV OE Dna Dnb Dnc Qn L L L L Data a Data b Data c Data a L L H L Data a Data b Data c Data a H L L L Data a Data b Data c Data b H L H L Data a Data b Data c Data b X H L L Data a Data b Data c Data c X H H L Data a Data b Data c Data c X X X H X X X Z H = High voltage level L = Low voltage level X = Don’t care Z = High impedance “off” state
Philips Semiconductors Product specification 74F723A/74F723–1/ 74F725A/74F725–1Multiplexers
1990 Dec 13 5
LOGIC DIAGRAM – 74F725A/74F725-1 D0a D0b D0c D1a D1b D1c D2a D2b D2c D3a D3b D3c VCC = Pin 18 GND = Pin 7 SF01233 Q05
20 Q16
15 Q28
12 Q39
FUNCTION TABLE – 74F725A/74F725-1 INPUTS OUTPUT S0 S1 Dna Dnb Dnc Dnd Qn L L Data a Data b Data c Data d Data a H L Data a Data b Data c Data d Data b L H Data a Data b Data c Data d Data c H H Data a Data b Data c Data d Data d H = High voltage level L = Low voltage level
Philips Semiconductors Product specification 74F723A/74F723–1/ 74F725A/74F725–1Multiplexers
1990 Dec 13 6
Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range. SYMBOL PARAMETER RATING UNIT VCC Supply voltage –0.5 to +7.0 V VIN Input voltage –0.5 to +7.0 V IIN Input current –30 to +5 mA VOUT Voltage applied to output in High output state –0.5 to +VCC V IO Current applied to output in Low output state 74F723-1, 74F725-1 10 mA IOUT C urrent applied to output in Low output state 74F723A, 74F725A 96 mA Tamb Operating free-air temperature range 0 to +70 °C Tstg Storage temperature –65 to +150 °C RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNIT SYMBOL PARAMETER MIN NOM MAX VCC Supply voltage 4.5 5.0 5.5 V VIH High-level input voltage 2.0 V VIL Low-level input voltage 0.8 V IIK Input clamp current –18 mA IOH High-level output current –15 mA IO Low level output current 74F723-1, 74F725-1 5 mA IOL Low-level output current 74F723A, 74F725A 64 mA Tamb Operating free-air temperature 0 70 °C
Philips Semiconductors Product specification 74F723A/74F723–1/ 74F725A/74F725–1Multiplexers
1990 Dec 13 7
DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) NO TAG LIMITS UNIT SYMBOL PARAMETER TEST CONDITIONS NO TAG MIN TYP NO TAG MAX IO = 3mA ±10%V CC 2.4 V VO High level output voltage VCC = MIN, V MAX IOH = –3mA ±5%V CC 2.7 3.4 V VOH High-level output voltage VIL = MAX , VIH = MIN IO = 15mA ±10%V CC 2.0 VIH IOH = –15mA ±5%V CC 2.0 V 74F723-1/ IO = 5mA ±10%V CC 0.38 0.50 V VO Low level output voltage 74F723 1/ 74F725-1 VCC = MIN, V MAX IOL = 5mA ±5%V CC 0.38 0.50 V VOL Low-level output voltage 74F723A/ VIL = MAX , VIH = MIN IO = MAX ±10%V CC 0.38 0.55 V74F723A/ 74F725A IH IOL = MAX ±5%V CC 0.42 0.55 V VIK Input clamp voltage VCC = MIN, II = IIK –0.73 –1.2 V II Input current at maximum input voltage VCC = MAX, VI = 7.0V 100 µA IIH High-level input current VCC = MAX, VI = 2.7V 20 µA I Low level input current Others VCC = MAX V =05 V –20 µA IIL Low-level input current Dn only VCC = MAX , VI = 0.5V –40 µA IOZH Off-state output current High-level voltage applied 74F723A/ 74F723 1 VCC = MAX, VO = 2.7V 50 µA IOZL Off-state output current Low-level voltage applied 74F723-1 only VCC = MAX, VO = 0.5V –50 µA IOS Short-circuit output current3 74F723-1/ 74F725-1 VCC = MAX –60 –150 mA IO Output currentNO TAG 74F723A/ 74F725A VCC = MAX, VO = 2.25V –60 –150 mA ICCH 23 30 mA 74F723A ICCL VCC = MAX 29 40 mA ICCZ 25 40 mA ICCH 23 35 mA ICC Supply current 74F723-1 ICCL VCC = MAX 29 40 mA ICC current (total) ICCZ 26 40 mA() 74F725A ICCH VCC = MAX 16 25 mA 74F725A ICCL VCC = MAX 24 35 mA 74F725 1 ICCH VCC = MAX 17 25 mA 74F725-1 ICCL VCC = MAX 25 35 mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25°C. 3. Not more than one output should be shorted at a time. For testing IOS , the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. 4. IO is tested under conditions that produce current approximity one half of the true short-circuit output current (IOS ).
Philips Semiconductors Product specification 74F723A/74F723–1/ 74F725A/74F725–1Multiplexers
1990 Dec 13 8
AC ELECTRICAL CHARACTERISTICS – 74F723A/74F723-1 LIMITS TEST Tam b = +25°C Tamb = 0° C to +70°C V =5 V± 10%SYMBOL PARAMETER TEST CONDITION amb VCC = 5V C 50pF R 500 VCC = 5V ± 10% C L = 50pF, UNITCONDITION C L = 50pF, R L = 500 C L = 50pF, RL = 500 MIN TYP MAX MIN MAX tPLH tPHL Propagation delay Dna, Dnb, Dnc to Qn Waveform 1, 2 2.5 2.0 5.0 4.5 8.0 7.0 2.0 2.0 8.5 7.5 ns ns tPLH tPHL Propagation delay S0, S1, INV to Qn 74F723A Waveform 1, 3 6.5 4.0 9.0 7.5 12.5 11.0 4.0 3.5 14.0 12.0 ns ns tPZH tPZL Output Enable time OE to Qn 74F723A Waveform 4 Waveform 5 2.0 2.5 4.0 4.5 6.5 7.0 2.0 2.0 7.5 7.5 ns ns tPHZ tPLZ Output Disable time OE to Qn Waveform 4 Waveform 5 2.5 3.0 4.0 5.0 7.0 7.5 2.0 2.5 7.5 8.5 ns ns tPLH tPHL Propagation delay Dna, Dnb, Dnc to Qn Waveform 1, 2 2.5 2.5 6.0 5.0 8.5 8.0 2.5 2.0 9.5 8.0 ns ns tPLH tPHL Propagation delay S0, S1, INV to Qn 74F723 1 Waveform 1, 3 7.0 5.0 10.0 9.0 14.0 12.5 6.0 4.5 16.0 13.5 ns ns tPZH tPZL Output Enable time OE to Qn 74F723-1 Waveform 4 Waveform 5 3.0 3.0 4.5 5.0 7.5 7.5 2.5 3.0 8.0 8.0 ns ns tPHZ tPLZ Output Disable time OE to Qn Waveform 4 Waveform 5 2.5 4.0 4.5 6.0 7.0 8.5 2.0 3.0 8.0 9.5 ns ns AC ELECTRICAL CHARACTERISTICS – 74F725A/74F725-1 LIMITS TEST Tam b = +25°C Tamb = 0 to +70°C V =5 V± 10%SYMBOL PARAMETER TEST CONDITION amb VCC = 5V C 50pF R 500 VCC = 5V ± 10% C L = 50pF, UNITCONDITION C L = 50pF, R L = 500 C L = 50pF, R L = 500 MIN TYP MAX MIN MAX tPLH tPHL Propagation delay Dna, Dnb, Dnc, Dnd to Qn 74F725A Waveform 1, 2 2.0 2.0 3.5 3.5 6.5 6.5 2.0 2.0 7.0 6.5 ns ns tPLH tPHL Propagation delay S0, S1 to Qn 74F725A Waveform 1 6.0 5.0 8.5 7.0 11.5 10.0 5.5 4.5 13.5 10.5 ns ns tPLH tPHL Propagation delay Dna, Dnb, Dnc, Dnd to Qn 74F725 1 Waveform 1, 2 2.0 2.0 4.0 4.0 7.0 6.5 2.0 2.0 7.5 7.5 ns ns tPLH tPHL Propagation delay S0, S1 to Qn 74F725-1 Waveform 1 6.5 5.0 9.0 8.5 12.0 10.5 5.5 5.0 14.0 11.0 ns ns
Philips Semiconductors Product specification 74F723A/74F723–1/ 74F725A/74F725–1Multiplexers
1990 Dec 13 9
For all waveforms, VM = 1.5V VM VM VM VM tPHLtPLH Dna, Dnb, Dnc, Dnd Sn Qn SF01234 Waveform 1. Propagation Delay for Non-Inverting Output VM VM VM VM tPLHtPHL Q n Dna, Dnb, Dnc, Dnd, Sn SF01235 Waveform 2. Propagation Delay for Inverting Output VM VM tPHL tPLH INV Qn SF01225 Waveform 3. Propagation Delay for INV to Output VM VM VM tPHZtPZH VOH -0.3V OE Qn SF00343 Waveform 4. 3-State Output Enable Time to High Level and Output Disable Time from High Level VM VM VM tPLZtPZL VOL +0.3V Qn OE SF00344 Waveform 5. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level
Philips Semiconductors Product specification 74F723A/74F723–1/ 74F725A/74F725–1Multiplexers
1990 Dec 13 10
TEST CIRCUIT AND WAVEFORMS tw 90% VM 10% 90% VM 10% 90% VM 10% 90% VM 10% NEGATIVE PULSE POSITIVE PULSE tw AMP (V) tTHL (tf ) INPUT PULSE REQUIREMENTS rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns Input Pulse Definition VCC family 74F D.U.T.PULSE GENERATOR R LC LR T VIN VOUT Test Circuit for 3-State Outputs DEFINITIONS: R L = Load resistor; see AC electrical characteristics for value. C L = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. R T = Termination resistance should be equal to ZOUT of pulse generators. tTHL (tf ) tTLH (tr ) tTLH (tr ) AMP (V) amplitude 3.0V 1.5V VM R L 7.0V SF00777 TEST SWITCH tPLZ closed tPZL closed All other open SWITCH POSITION
Philips Semiconductors Product specification 74F723A/723-1, 74F725A/725-1Multiplexers
1990 Dec 13 11
DIP24: plastic dual in-line package; 24 leads (300 mil) SOT222-1
Philips Semiconductors Product specification 74F723A/723-1, 74F725A/725-1Multiplexers
1990 Dec 13 12
SO24: plastic small outline package; 24 leads; body width 7.5 mm SOT137-1
Philips Semiconductors Product specification 74F723A/723-1, 74F725A/725-1Multiplexers
1990 Dec 13 13
Philips Semiconductors Product specification 74F723A/723-1, 74F725A/725-1Multiplexers yyyy mmm dd 14 Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 10-98 Document order number: 9397-750-05175 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.