74F657 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 12
Technical content
/C0109 /C0110 /C0114 74F657 Octal transceiver with 8-bit parit generator/checker Process specification IC15 Data Handbook
1990 Jul 30
Philips Semiconductors Product specification 74F657Octal transceiver with 8-bit parity generator/checker
290 July 30 853 1117 00081
FEATURES
- Combines 74F245 and 74F280A functions in one package
- High impedance base input for reduced loading (70µA in high and low states)
- Ideal in applications where high output drive and light bus loading are required (IIL is 70µA vs FAST std of 600µA)
- 3–state buffer outputs sink 64mA and source 15mA
- Input diodes for termination effects
- 24–pin plastic slim DIP (300mil) package
- Industrial temperature range available (–40°C to +85°C)
DESCRIPTION
The 74F657 is an octal transceiver featuring non–inverting buffers with 3–state outputs and an 8–bit parity generator/checker, and is intended for bus–oriented applications. The buffers have a guaranteed current sinking capability of 24mA at the A ports and 64mA at the B ports. The transmit/receive (T/R ) input determines the direction of the data flow through the bidirectional transceivers. Transmit (active high) enables data from A ports to B ports; receive (active low) enables data from B ports to A ports. The output enable (OE) input disables both the A and B ports by placing them in a high impedance condition when the OE input is high. The parity select (ODD/EVEN) input gives the user the option of odd or even parity systems. The parity (PARITY) pin is an output from the generator/checker when transmitting from the port A to B (T/R = high) and an input when receiving from port B to A port ( T/R = low). When transmitting (T/R = high) the parity select (ODD/EVEN) input is set, then the A port data is polled to determined the number of high bits. The parity (PARITY) output then goes to the logic state determined by the parity select (ODD/EVEN ) setting and by the number of high bits on port A. For example, if the parity select (ODD/EVEN) is set low (even parity), and the number of high bits on port A is odd, then the parity (PARITY) output will be high, transmitting even parity. If the number of high bits on port A is even, then the parity (PARITY) output will be low, keeping even parity. When in receive mode (T/R = low) the B port is polled to determine the number of high bits. If parity select (ODD/EVEN) is low (even parity) and the number of highs on port B is: (1) odd and the parity (PARITY) input is high, then ERROR will be high, significantly no error. (2) even and the parity (PARITY) input is high, then ERROR will be asserted low, indicating an error. TYPE TYPICAL PROPAGA- TION DELAY TYPICAL SUPPLY CURRENT( TOTAL) 74F657 8.0ns 100mA
ORDERING INFORMATION
COMMERCIAL RANGE INDUSTRIAL RANGE DESCRIPTION VCC = 5V ±10%, VCC = 5V ±10%, PKG DWG # Tamb = 0°C to +70°C Tamb = –40°C to +85°C 24–pin plastic slim DIP (300mil) N74F657N I74F657N SOT222-1 24–pin plastic SOL N74F657D I74F657D SOT137-1 24–pin plastic SSOP N74F657DB I74F657DB SOT340-1 INPUT AND OUTPUT LOADING AND FAN OUT TABLE PINS DESCRIPTION 74F (U.L.) HIGH/LOW LOAD VALUE HIGH/LOW A0 – A7 A ports 3–state inputs 3.5/0.117 70µA/70µA B0 – B7 B ports 3–state inputs 3.5/0.117 70µA/70µA PARITY Parity input 3.5/0.117 70µA/70µA T/R Transmit/receive input 2.0/0.066 40µA/40µA ODD/EVEN Parity select input 1.0/0.033 20µA/20µA OE Output enable input (active low) 2.0/0.066 40µA/40µA A0 – A7 A ports 3–state outputs 150/40 3.0mA/24mA B0 – B7 B ports 3–state outputs 750/106.7 15mA/64mA PARITY Parity output 750/106.7 15mA/64mA ERROR Error output 750/106.7 15mA/64mA Note to input and output loading and fan out table 1. One (1.0) FAST unit load is defined as: 20µA in the high state and 0.6mA in the low state.
Philips Semiconductors Product specification 74F657Octal transceiver with 8-bit parity generator/checker
90 July 30 3
3 EN1/3G5 (REC)
11 3 EN2 (XMIT) 2 k 4, 2 4, 1 Z11 SF00416 LOGIC SYMBOL T/R OE B0 B1 B2 B3 ODD/EVEN B4 B5 B6 B7 A0 A1 A2 A3 A4 A5 A6 A7 2345689 1 0 23 22 21 20 17 16 15 14 PARITY VCC = Pin 7 GND = Pin 18, 19 ERROR SF00415
Philips Semiconductors Product specification 74F657Octal transceiver with 8-bit parity generator/checker
90 July 30 4
VCC = Pin 7, GND = Pin 18, 19 PARITY ERROR ODD/EVEN T/R OE SF00417
Philips Semiconductors Product specification 74F657Octal transceiver with 8-bit parity generator/checker
90 July 30 5
NUMBER OF INPUTS THAT ARE HIGH INPUTS INPUT/OUTPUT OUTPUTS OE T/R ODD/EVEN PARITY ERROR OUTPUTS MODE 0, 2, 4, 6, 8 L L L L L L H H L L L L H L H H L L H L H L H L Z Z H L L H Transmit Transmit Receive Receive Receive Receive 1, 3, 5, 7 L L L L L L H H L L L L H L H H L L L H H L H L Z Z L H H L Transmit Transmit Receive Receive Receive Receive Don’t care H X X Z Z Z Notes to function table 1. H = High voltage level 2. L = Low voltage level 3. X = Don’t care 4. Z = High impedance ”’off” state ABSOLUTE MAXIMUM RATINGS (Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free air temperature range.) SYMBOL PARAMETER RATING UNIT VCC Supply voltage –0.5 to +7.0 V VIN Input voltage –0.5 to +7.0 V IIN Input current –30 to +5 mA VOUT Voltage applied to output in high output state –0.5 to VCC V IOUT Current applied to output in low output state A0 – A7 48 mA B0 – B7, PARITY, ERROR 128 mA Tamb Operating free air temperature range Commercial range 0 to +70 °C Industrial range –40 to +85 °C Tstg Storage temperature range –65 to +150 °C RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNIT MIN NOM MAX VCC Supply voltage 4.5 5.0 5.5 V VIH High–level input voltage 2.0 V VIL Low–level input voltage 0.8 V IIk Input clamp current –18 mA IOH High–level output current A0 – A7 –3 mA B0 – B7, PARITY, ERROR –15 mA IOL Low–level output current A0 – A7 24 mA B0 – B7, PARITY, ERROR 64 mA Tamb Operating free air temperature range Commercial range 0 +70 °C Industrial range –40 +85 °C
Philips Semiconductors Product specification 74F657Octal transceiver with 8-bit parity generator/checker
90 July 30 6
DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST LIMITS UNIT CONDITIONS 1 MIN TYP 2 MAX All outputs IOH = –3mA4,5 ±10%V CC 2.4 V VCC = MIN, ±5%V CC 2.7 V VOH High-level output voltage B0 – B7, VIL = MAX, IOH = –12mA5 ±10%V CC 2.0 V PARITY, VIH = MIN ±5%V CC 2.0 V ERROR IOH = –15mA4 ±10%V CC 2.0 V ±5%V CC 2.0 V A0 – A7 IOL = 24mA4,5 ±10%V CC 0.35 0.50 V VCC = MIN, ±5%V CC 0.35 0.50 V VOL Low-level output voltage B0 – B7, VIL = MAX, IOL = 48mA4 ±10%V CC 0.38 0.55 V PARITY, VIH = MIN IOL = 48mA5 ±5%V CC 0.42 0.55 V ERROR IOL = 64mA4 ±5%V CC 0.42 0.55 V VIK Input clamp voltage VCC = MIN, II = IIK –0.73 -1.2 V Input current at OE , T/R, ODD/EVEN VCC = 0.0V, VI = 7.0V 100 µA II maximum input voltage A0 – A7 VCC = 5.5V, VI = 5.5V 2 mA B0 – B7 1 mA OOD/EVEN 204 µA IIH High–level input current VCC = MAX, VI = 2.7V 405 µA OE , T/R 404 µA 805 µA IIL Low–level input current OOD/EVEN VCC = MAX, VI = 0.5V –20 µA OE , T/R –40 µA IOZH + IIH Off–state output current, high–level voltage applied A0 – A7, B0 – B7, VCC = MAX, VO = 2.7V 70 µA IOZL + IIL Off–state output current, low–level voltage applied PARITY VCC = MAX, VO = 0.5V –70 µA IOZH Off–state output current, High–level voltage applied ERROR VCC = MAX, VO = 2.7V 50 µA IOZL Off–state output current, low–level voltage applied VCC = MAX, VO = 0.5V –50 µA IOS Short circuit output current3 A0 – A7 VCC = MAX -60 -150 mA B0 – B7 -100 -225 mA ICCH 90 1254 mA 90 1355 mA ICC Supply current (total) ICCL VCC = MAX 106 1504 mA 106 1605 mA ICCZ 98 145 mA Notes to DC electrical characteristics 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25°C. 3. Not more than one output should be shorted at a time. For testing IOS , the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a high output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. 4. For commercial range. 5. For industrial range.
Philips Semiconductors Product specification 74F657Octal transceiver with 8-bit parity generator/checker
90 July 30 7
AC ELECTRICAL CHARACTERISTICS LIMITS Tamb = +25°C Tamb = 0°C to +70°C Tamb = –40°C to +85°C SYMBOL PARAMETER TEST VCC = +5.0V VCC = +5.0V ± 10% VCC = +5.0V ± 10% UNIT CONDITION C L = 50pF, R L = 500Ω C L = 50pF, R L = 500Ω C L = 50pF, R L = 500Ω MIN TYP MAX MIN MAX MIN MAX tPLH tPHL Propagation delay An to Bn or Bn to An Waveform 2 2.5 3.0 5.5 6.0 7.5 7.5 2.5 3.0 8.0 8.0 2.0 2.5 9.0 9.0 ns tPLH tPHL Propagation delay An to PARITY Waveform 1, 2 7.0 7.0 10.0 10.0 14.0 15.0 7.0 7.0 16.0 16.0 5.5 6.5 16.5 19.0 ns tPLH tPHL Propagation delay ODD/EVEN to PARITY, ERROR Waveform 1, 2 4.5 4.5 7.5 8.0 11.0 11.5 4.5 4.5 12.0 12.5 3.5 4.0 13.0 15.5 ns tPLH tPHL Propagation delay Bn to ERROR Waveform 1, 2 8.0 8.0 14.0 14.0 20.5 20.5 7.5 7.5 22.5 22.5 7.5 7.5 24.5 25.0 ns tPLH tPHL Propagation delay PARITY to ERROR Waveform 1, 2 8.0 8.0 11.5 12.0 15.5 15.5 7.5 8.0 16.5 17.0 6.5 6.5 18.5 20.0 ns tPZH tPZL Output enable time1 to high or low level Waveform 3, 4 3.0 4.0 5.5 7.0 8.0 9.5 3.0 4.0 9.0 11.0 2.0 4.0 9.0 13.0 ns tPHZ tPLZ Output disable time from high or low level Waveform 3, 4 2.0 2.0 4.5 4.0 7.5 6.0 2.0 2.0 8.0 6.5 1.0 1.0 8.0 7.5 ns Note to AC electrical characteristics 1. These delay times reflect the 3-state recovery time only and not the signal through the buffers or the parity check circuitry. To assure VALID information at the ERROR pin, time must be allowed for the signal to propagate through the drivers (B to A), through the parity check circuitry (same as A to PARITY), and to the ERROR output. VALID data at the ERROR pin > (B to A) + (A to PARITY). AC WAVEFORMS VM VM VM VM tPLHtPHL An, Bn, ODD/EVEN, PARITY PARITY, ERROR SF00418 Waveform 1. Propagation delay for inverting outputs VM VM VM VM tPHLtPLH An, Bn, PARITY, ERROR An, Bn, ODD/EVEN, PARITY SF00420 Waveform 2. Propagation delay for non-Inverting outputs VM VM VM tPHZtPZH OE VOH -0.3V An, Bn, PARITY, ERROR SF00419 Waveform 3. 3-state output enable time to high level and output disable time from high level VM VM VM tPLZtPZL OE VOL +0.3V 3.5V An, Bn, PARITY, ERROR SF00421 Waveform 4. 3-state output enable time to low level and output disable time from low level Note to AC waveforms 1. For all waveforms, VM = 1.5V.
Philips Semiconductors Product specification 74F657Octal transceiver with 8-bit parity generator/checker
90 July 30 8
TEST CIRCUIT AND WAVEFORMS tw 90% VM 10% 90% VM 10% 90% VM 10% 90% VM 10% NEGATIVE PULSE POSITIVE PULSE tw AMP (V) tTHL (tf ) INPUT PULSE REQUIREMENTS rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns Input Pulse Definition VCC family 74F D.U.T.PULSE GENERATOR R LC LR T VIN VOUT Test Circuit for Open Collector Outputs DEFINITIONS: R L = Load resistor; see AC electrical characteristics for value. C L = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. R T = Termination resistance should be equal to ZOUT of pulse generators. tTHL (tf ) tTLH (tr ) tTLH (tr ) AMP (V) amplitude 3.0V 1.5V VM R L 7.0V SF00128 TEST SWITCH tPLZ closed tPZL closed All other open SWITCH POSITION
Philips Semiconductors Product specification 74F657Octal transceiver with 8-bit parity generator/checker
1990 Jul 30 9
DIP24: plastic dual in-line package; 24 leads (300 mil) SOT222-1
Philips Semiconductors Product specification 74F657Octal transceiver with 8-bit parity generator/checker
1990 Jul 30 10
SO24: plastic small outline package; 24 leads; body width 7.5 mm SOT137-1
Philips Semiconductors Product specification 74F657Octal transceiver with 8-bit parity generator/checker
1990 Jul 30 11
SSOP24: plastic shrink small outline package; 24 leads; body width 5.3 mm SOT340-1
Philips Semiconductors Product specification 74F657Octal transceiver with 8-bit parity generator/checker yyyy mmm dd 12 Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 10-98 Document order number: 9397-750-05171 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.