74F597 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 12

Technical content

/C0109 /C0110 /C0114 74F597 8-bit shift register with input storage registers Product specification IC15 Data Handbook

1991 Sep 13

Philips Semiconductors Product specification 74F5978-bit shift register with input storage registers

21991 Sep 13 853–1556 03964

FEATURES

  • High impedance PNP base inputs for reduced loading (20µA in High and Low states)
  • 8-bit parallel storage register
  • 3-State output buffers
  • Shift register has asynchronous direct overriding reset
  • Shift load SHLD is functional when SHCP is Low and locked out when SHCP is High
  • Guaranteed shift frequency DC to 105MHz

DESCRIPTION

The 74F597 consists of an 8-bit storage register feeding a parallel-in/serial-in, serial-out 8-bit shift register. The storage register and shift register have separate positive edge triggered clocks. The shift register has asynchronous reset and when SHCP is Low, it has asynchronous load. The shift register load function has been modified to load when both SHLD and SHCP are Low. When SHCP is High the shift register load operation is not performed. Data will be properly shifted on the rising edge of SHCP when SHLD is High. PIN CONFIGURATION 107 SF00366 GND VCC D S SHLD STCP SHCP SHRST Q S TYPE TYPICAL fMAX TYPICAL SUPPLY CURRENT (TOTAL) 74F597 135MHz 42mA

ORDERING INFORMATION

VCC = 5V ±10%, Tamb = 0°C to +70°C PKG DWG # 16-pin plastic DIP N74F597N SOT38-4 16-pin plastic SO N74F597D SOT109-1 INPUT AND OUTPUT LOADING AND FAN-OUT TABLE PINS DESCRIPTION 74F (U.L.) HIGH/LOW LOAD VALUE HIGH/LOW Ds Serial data input 1.0/0.033 20µA/20µA D0–D7 Parallel data inputs 1.0/0.033 20µA/20µA SHCP Shift register clock pulse input 1.0/0.033 20µA/20µA STCP Storage register clock pulse input 1.0/0.033 20µA/20µA SHLD Shift register load input (active Low) 1.0/0.033 20µA/20µA SHRST Shift register reset input (active Low) 1.0/0.033 20µA/20µA Qs Serial data output 50/33 1.0mA/20mA NOTE: One (1.0) FAST unit load is defined as: 20µA in the High state and 0.6mA in the Low state.

Philips Semiconductors Product specification 74F5978-bit shift register with input storage registers

1991 Sep 13 3

10 SHRST

12 STCP

VCC = Pin 16 GND = Pin 8 Qs 456 D4 D5 D6 Ds IEC/IEEE SYMBOL (IEEE/IEC) SF01108 15 1D R C3/ SRG8 FUNCTION TABLE INPUTS OPERATING MODES STCP SHCP SHLD SHRST OPERATING MODES ↑ X X X Data loaded to storage registers ↑ L L H Data loaded from inputs to shift register ↑ L L H Data transferred from storage registers to shift registers X L L L Invalid logic, state of shift register indeterminate when signals removed X X H L Shift register cleared X ↑ H H Shift register clocked, Qn=Qn–1, Q0=Ds ↑ H X H Hold H = High voltage level L = Low voltage level X = Don’t care ↑ = Low-to-High clock transition = Not a Low-to-High clock transition

Philips Semiconductors Product specification 74F5978-bit shift register with input storage registers

1991 Sep 13 4

VCC = Pin 16 GND = Pin 8 C2 2D S R C2 2D S R C2 2D S R C2 2D S R C2 2D S R C2 2D S R C2 2D S R C2 2D S R C1 9 Qs SHRST SHCP SHLD STCP Ds SF01109

Philips Semiconductors Product specification 74F5978-bit shift register with input storage registers

1991 Sep 13 5

(Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL PARAMETER RATING UNIT VCC Supply voltage –0.5 to +7.0 V VIN Input voltage –0.5 to +7.0 V IIN Input current –30 to +5 mA VOUT Voltage applied to output in High output state –0.5 to +VCC V IOUT Current applied to output in Low output state 40 mA Tamb Operating free-air temperature range 0 to +70 °C Tstg Storage temperature range –65 to +150 °C RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNITSYMBOL PARAMETER MIN NOM MAX UNIT VCC Supply voltage 4.5 5.0 5.5 V VIH High-level input voltage 2.0 V VIL Low-level input voltage 0.8 V IIK Input clamp current –18 mA IOH High-level output current –1 mA IOL Low-level output current 20 mA Tamb Operating free-air temperature range 0 +70 °C DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) NO TAG LIMITS SYMBOL PARAMETER TEST CONDITIONS NO TAG MIN TYP NO TAG MAX UNIT VO High level output voltage VCC = MIN, VIL= MAX IO = 1mA ±10%V CC 2.5 V VOH High-level output voltage VIL = MAX , VIH = MIN IOH = –1mA ±5%V CC 2.7 3.4 V VO Low level output voltage VCC = MIN, VIL = MAX, ±10%V CC 0.30 0.50 V VOL Low-level output voltage CC , IL , VIH = MIN, IOL = MAX ±5%V CC 0.30 0.50 V VIK Input clamp voltage VCC = MIN, II = IIK –0.73 –1.2 V II Input current at maximum input voltageVCC = MAX, VI = 7.0V 100 µA IIH High-level input current VCC = MAX, VI = 2.7V 20 µA IIL Low-level input current VCC = MAX, VI = 0.5V –20 µA IOS Short-circuit output currentNO TAG VCC = MAX –60 –150 mA ICC Supply current (total) ICCH VCC = MAX 43 65 mA ICC Supply current (total) ICCL VCC = MAX 41 60 mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25°C. 3. Not more than one output should be shorted at a time. For testing IOS , the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last.

Philips Semiconductors Product specification 74F5978-bit shift register with input storage registers

1991 Sep 13 6

AC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITION VCC = +5V Tamb = +25°C C L = 50pF, RL = 500Ω VCC = +5V ± 10% Tamb = 0°C to +70°C C L = 50pF, RL = 500Ω UNIT MIN TYP MAX MIN MAX fMAX Maximum clock frequency Waveform NO TAG 120 135 105 MHz tPLH tPHL Propagation delay SHCP to Qs Waveform NO TAG 7.0 6.0 8.5 7.5 11.0 10.0 6.0 5.5 12.5 10.5 ns tPLH tPHL Propagation delay SHLD to Qs Waveform NO TAG 8.0 6.0 9.5 7.5 12.0 10.0 7.0 5.5 13.5 11.0 ns tPLH tPHL Propagation delay STCP to Qs Waveform NO TAG 7.5 8.0 9.5 9.5 11.5 12.0 6.5 7.5 13.0 13.0 ns tPHL Propagation delay SHRST to Qs Waveform AC SETUP REQUIREMENTS LIMITS SYMBOL PARAMETER TEST CONDITION VCC = +5V Tamb = +25°C C L = 50pF, RL = 500Ω VCC = +5V ± 10% Tamb = 0°C to +70°C C L = 50pF, RL = 500Ω UNIT MIN TYP MAX MIN MAX ts(H) ts(L) Setup time, High or Low Dn to STCP Waveform NO TAG 1.0 1.5 1.5 2.0 ns th(H) th(L) Hold time, High or Low Dn to STCP Waveform NO TAG 2.0 2.0 2.0 3.0 ns ts(H) ts(L) Setup time, High or Low Ds to SHCP Waveform NO TAG 1.0 1.5 1.0 2.0 ns th(H) th(L) Hold time, High or Low Ds to SHCP Waveform NO TAG 1.5 2.0 2.0 2.5 ns ts(H) Setup time, High STCP to SHLD ↑ Waveform 4 8.5 9.0 ns th(L) Hold time, Low STCP to SHLD ↑ (hold mode) Waveform NO TAG 0.0 0.0 ns ts(H) Setup time, High SHLD to SHCP↑ Waveform NO TAG 6.0 6.5 ns tW (H) tW (L) SHCP Pulse width High or Low Waveform NO TAG 4.5 4.5 5.5 4.5 ns tW (H) tW (L) STCP Pulse width High or Low Waveform NO TAG 4.5 4.5 5.0 4.5 ns tW (L) SHRST Pulse width, Low Waveform NO TAG 4.5 4.5 ns tW (L) SHLD Pulse width, Low Waveform NO TAG 4.5 4.5 ns tREC Recovery time, SHRST to SHCP Waveform NO TAG 2.0 2.5 ns

Philips Semiconductors Product specification 74F5978-bit shift register with input storage registers

1991 Sep 13 7

Don’t care Don’t care Don’t care Don’t care Don’t care Don’t care Don’t care Don’t care SF01110

Philips Semiconductors Product specification 74F5978-bit shift register with input storage registers

1991 Sep 13 8

For all waveforms, VM = 1.5V. The shaded areas indicate when the input is permitted to change for predictable output performance. SF00371 VM VM VM 1/fMAX tPHL tw (L) QS tw (H) VM STCP, SHCP, SHLD SHRST tPLH Waveform 1. Propagation Delay, Clock Input to Output, Clock Pulse Widths, and Maximum Clock Frequency, Shift Register Reset and Load Inputs to Serial Data Output VM VM VM trec tPHL SHRST SHCP Qs VM SF01112 Waveform 2. Propagation Delay, Shift Register Reset and Load Inputs to Serial Data Output, Shift Register Reset and Load Inputs to Shift Register Clock Pulse Input Recovery Time SF01113 VMVMVM VMVM Dn, Ds SHCP, SHLD SHCP, STCP, SHLD ts(H) ts(L) t h(L)th(H) VM Waveform 3. Setup and Hold Times SF01114 VM VM VM VM STCP SHLD , SHCP ts(H) th(L) Waveform 4. Setup and Hold Time TEST CIRCUIT AND WAVEFORMS tw 90% VM 10% 90% VM 10% 90% VM 10% 90% VM 10% NEGATIVE PULSE POSITIVE PULSE tw AMP (V) tTHL (tf ) INPUT PULSE REQUIREMENTS rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns Input Pulse Definition VCC family 74F D.U.T.PULSE GENERATOR R LC LR T VIN VOUT Test Circuit for Totem-Pole Outputs DEFINITIONS: R L = Load resistor; see AC ELECTRICAL CHARACTERISTICS for value. C L = Load capacitance includes jig and probe capacitance; see AC ELECTRICAL CHARACTERISTICS for value. R T = Termination resistance should be equal to ZOUT of pulse generators. tTHL (tf ) tTLH (tr ) tTLH (tr ) AMP (V) amplitude 3.0V 1.5V VM SF00006

Philips Semiconductors Product specification 74F5978-bit shift register with input storage registers

1991 Sep 13 9

DIP16: plastic dual in-line package; 16 leads (300 mil) SOT38-4

Philips Semiconductors Product specification 74F5978-bit shift register with input storage registers

1991 Sep 13 10

SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

Philips Semiconductors Product specification 74F5978-bit shift register with input storage registers

1991 Sep 13 11

Philips Semiconductors Product specification 74F5978-bit shift register with input storage registers yyyy mmm dd 12 Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors

811 East Arques Avenue

P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381  Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 10-98 Document order number: 9397-750-05144 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.