74F2952 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 14

Technical content

/C0109 /C0110 /C0114 74F2952 Registered transceiver, non-inverting (3-State) 74F2953 Registered transceiver, inverting (3-State) Product specification 1989 Sep 22 INTEGRATED CIRCUITS IC15 Data Handbook

Philips Semiconductors Product specification 74F2952, 74F2953Transceivers 74F2952 Registered transceiver, non-inverting (3-State) 74F2953 Registered transceiver, inverting (3-State)

21989 Sep 22 853–1097 97708

FEATURES

  • 8-bit registered transceivers
  • Two 8-bit, back-to-back registers store data moving in both directions between two bidirectional buses
  • Separate Clock, Clock Enable and 3-State Enable provided for each register
  • 74F2952 non-inverting
  • 74F2953 inverting
  • AM2952/2953 functional equivalent
  • ‘A’ outputs sink 24mA and source 3mA
  • ‘B’ outputs sink 64mA and source 15mA
  • 300 mil wide 24-pin Slim DIP package

DESCRIPTION

The 74F2952 and 74F2953 are 8-bit registered transceivers. Two 8-bit back-to-back registers store data flowing in both directions between two bi-directional buses. Data applied to the inputs is entered and stored on the rising edge of the Clock (CPXX) provided that the Clock Enable (CEXX ) is Low. The data is then present at the 3-State output buffers, but is only accessible when the Output Enable (OEXX) is Low. Data flow from ‘A’ inputs to ‘B’ outputs is the same as for ‘B’ inputs to ‘A’ outputs. TYPE TYPICAL fMAX TYPICAL SUPPLY CURRENT (TOTAL) 74F2952 160MHz 105mA 74F2953 160MHz 105mA

ORDERING INFORMATION

VCC = 5V ±10%, Tamb = 0°C to +70°C PACKAGE DRAWING NUMBER 24-pin Plastic Slim DIP (300mil) N74F2952N, N74F2953N SOT222-1 24-pin Plastic SOL1 N74F2952D, N74F2953D SOT137-1 28-pin Plastic Leaded Chip Carrier N74F2952A, N74F2953A SOT261-2 NOTE: 1. Thermal mounting techniques are recommended. See SMD Process Applications for a discussion of thermal consideration for surface mounted devices. INPUT AND OUTPUT LOADING AND FAN-OUT TABLE PINS DESCRIPTION 74F(U.L.) HIGH/LOW LOAD VALUE HIGH/LOW A0 – A7 Port A, 3-State inputs 3.5/1.0 70µA/0.6mA B0 – B7 Port B, 3-State inputs 3.5/1.0 70µA/0.6mA CPAB, CPBA Clock inputs 1.0/1.0 20µA/0.6mA CEAB , CEBA Clock Enable inputs 1.0/1.0 20µA/0.6mA OEAB , OEBA Output Enable inputs 1.0/1.0 20µA/0.6mA A0 – A7 Port A, 3-State outputs 150/40 3.0mA/24mA B0 – B7 Port B, 3-State outputs 750/106.7 15mA/64mA NOTE: One (1.0) FAST unit load is defined as: 20µA in the High state and 0.6mA in the Low state.

Philips Semiconductors Product specification 74F2952, 74F2953Transceivers

1989 Sep 22 3

DIP – 74F2952 12 13 24B7 OEAB CPAB CEAB VCC OEBA CPBA CEBAGND SF01371 PLCC – 74F2952 1234 12 13 14 15 16 17 18 262728 NC OEAB NC CPAB CEAB GND NC CEBA CPBA OEBA NC Vcc SF01373 DIP – 74F2953 12 13 24B7 OEAB CPAB CEAB VCC OEBA CPBA CEBAGND SF01372 PLCC – 74F2953 1234 12 13 14 15 16 17 18 262728 A NC OEAB NC CPAB CEAB GND NC CEBA CPBA OEBA NC Vcc SF01374

Philips Semiconductors Product specification 74F2952, 74F2953Transceivers

1989 Sep 22 4

LOGIC SYMBOL – 74F2952 16 17 18 19 20 21 22 23 A0 A1 A2 A3 A4 A5 A6 A7 CPAB CEAB CPBA CEBA B0 B1 B2 B3 B4 B5 B6 B7 87654321 OEBA OEAB VCC = PIN 24 GND = PIN 12 SF01375 LOGIC SYMBOL – 74F2953 16 17 18 19 20 21 22 23 A0 A1 A2 A3 A4 A5 A6 A7 CPAB CEAB CPBA CEBA B0 B1 B2 B3 B4 B5 B6 B7 87654321 OEBA OEAB VCC = PIN 24 GND = PIN 12 SF01376 IEC/IEEE SYMBOL – 74F2952 EN3 EN4 EN1 EN2 16 8 17 7 18 6 19 5 20 4 21 3 22 2 23 1 2,3,6 1,4,5 SF01377 IEC/IEEE SYMBOL – 74F2953 EN3 EN4 EN1 EN2 16 8 17 7 18 6 19 5 20 4 21 3 22 2 23 1 2,3,6 1,4,5 SF01378

Philips Semiconductors Product specification 74F2952, 74F2953Transceivers

1989 Sep 22 5

LOGIC DIAGRAM – 74F2952 CE Q CPD CEQ CP D CE Q CPD CEQ CP D CE Q CPD CEQ CP D CE Q CPD CEQ CP D CE Q CPD CEQ CP D CE Q CPD CEQ CP D CE Q CPD CEQ CP D CE Q CPD CEQ CP D A0 16 A1 17 OEAB CPAB CEAB A5 21 OEBA CPBA CEBA VCC = PIN 24 GND = PIN 12 SF01379 LOGIC DIAGRAM – 74F2953 CE Q CPD CEQ CP D CE Q CPD CEQ CP D CE Q CPD CEQ CP D CE Q CPD CEQ CP D CE Q CPD CEQ CP D CE Q CPD CEQ CP D CE Q CPD CEQ CP D CE Q CPD CEQ CP D A0 16 A1 17 OEAB CPAB CEAB A5 21 OEBA CPBA CEBA VCC = PIN 24 GND = PIN 12 SF01380

Philips Semiconductors Product specification 74F2952, 74F2953Transceivers

1989 Sep 22 6

FUNCTION TABLE for Register An or Bn INPUTS INTERNAL OPERATING An or Bn CPXX CEXX Q MODE X X H NC Hold data L ↑ L L Load data H ↑ L H Load data H = High voltage level L = Low voltage level ↑ = Low-to-High transition X = Don’t Care XX = AB or BA NC= No Change FUNCTION TABLE for Output Enable INPUTS INTERNAL An or Bn OUTPUTS OPERATING OEXX Q 74F2952 74F2953 MODE H X Z Z Disable outputs L L L H Enable outputs L H H L Enable outputs H = High voltage level L = Low voltage level X = Don’t Care XX = AB or BA Z = High impedance “off” state ABSOLUTE MAXIMUM RATINGS (Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL PARAMETER RATING UNIT VCC Supply voltage –0.5 to +7.0 V VIN Input voltage –0.5 to +7.0 V IIN Input current –30 to +5 mA VOUT Voltage applied to output in High output state –0.5 to +5.5 V I Current applied to output in Low output state A0 – A7 48 mA IOUT C urrent applied to output in Low output state B0 – B7 128 mA Tamb Operating free-air temperature range 0 to +70 °C Tstg Storage temperature range –65 to +150 °C RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNITSYMBOL PARAMETER MIN NOM MAX UNIT VCC Supply voltage 4.5 5.0 5.5 V VIH High-level input voltage 2.0 V VIL Low-level input voltage 0.8 V IIK Input clamp current –18 mA IO High level output current A0 – A7 –3 mA IOH High-level output current B0 – B7 –15 mA I Low level output current A0 – A7 24 mA IOL Low-level output current B0 – B7 64 mA Tamb Operating free-air temperature range 0 +70 °C

Philips Semiconductors Product specification 74F2952, 74F2953Transceivers

1989 Sep 22 7

DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST CONDITIONS 1 LIMITS UNITSYMBOL PARAMETER TEST CONDITIONS 1 MIN TYP 2 MAX UNIT A0 A7 IO = 3mA ±10% V CC 2.4 V VO High level output voltage A0–A7 VCC = MIN, VIL= MAX IOH = –3mA ±5% V CC 2.7 3.3 V VOH High-level output voltage B0 B7 VIL = MAX , VIH = MIN IO = 15mA ±10% V CC 2.0 V B0–B7 IOH = –15mA ±5% V CC 2.0 V A0 A7 IO = 24mA ±10% V CC 0.35 0.50 V VO Low level output voltage A0–A7 VCC = MIN, VIL= MAX IOL = 24mA ±5% V CC 0.35 0.50 V VOL Low-level output voltage B0 B7 VIL = MAX , VIH = MIN IOL = 48mA ±10% V CC 0.38 0.55 V B0–B7 IOL = 64mA ±5% V CC 0.42 0.55 V VIK Input clamp voltage VCC = MIN, II = IIK –0.73 –1.2 V II Input current at maximum input voltage CPAB, CPBA, OEAB , OEBA, CEAB , CEBA VCC = 5.5V, VI = 7.0V 100 µA I in ut voltage A0–A7, B0–B7 VCC = 5.5V, VI = 5.5V 1 mA IIH High-level input current CPAB, CPBA, OEAB , OEBA, CEAB , CEBA VCC = MAX, VI = 2.7V 20 µA IIL Low-level input current CPAB, CPBA, OEAB , OEBA, CEAB , CEBA VCC = MAX, VI = 0.5V –0.6 mA IIH+IOZH Off-state output current High-level voltage applied A0–A7, B0–B7 VCC = MAX, VO = 2.7V 70 µA IIL+IOZL Off-state output current Low-level voltage applied A0–A7, B0–B7 VCC = MAX, VO = 0.5V –600 µA IOS Short circuit output current3 A0–A7 VCC = MAX V O =0 V –60 –150 mA IOS Short-circuit output current3 B0–B7 VCC = MAX , VO = 0V –100 –225 mA ICCH 90 140 mA ICC Supply current (total) iCCL VCC = MAX 120 175 mA ICCZ 105 155 mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25°C. 3. Not more than one output should be shorted at a time. For testing IOS , the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last.

Philips Semiconductors Product specification 74F2952, 74F2953Transceivers

1989 Sep 22 8

AC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITION Tamb = +25°C VCC = +5V C L = 50pF, RL = 500Ω Tamb = 0°C to +70°C VCC = +5V ± 10% C L = 50pF, RL = 500Ω UNIT MIN TYP MAX MIN MAX fMAX Maximum clock frequency Waveform 1 145 160 135 MHz tPLH tPHL Propagation delay CPBA or CPAB to An or Bn Waveform 1 3.0 3.5 5.0 6.0 7.5 8.5 2.5 3.5 8.0 9.0 ns tPZH tPZL Output Enable time OEBA or OEAB to An or Bn Waveform 3 Waveform 4 2.0 3.5 4.5 6.0 7.0 9.5 2.0 3.0 8.0 10.0 ns tPHZ tPLZ Output Disable time OEBA or OEAB to An or Bn Waveform 3 Waveform 4 2.0 1.5 4.0 3.5 8.0 6.5 1.5 1.0 9.0 7.0 ns AC SETUP REQUIREMENTS LIMITS SYMBOL PARAMETER TEST CONDITION Tamb = +25°C VCC = +5V C L = 50pF, RL = 500Ω Tamb = 0°C to +70°C VCC = +5V ± 10% C L = 50pF, RL = 500Ω UNIT MIN TYP MAX MIN MAX ts(H) ts(L) Setup time, High or Low An or Bn to CPAB or CPBA 74F2952 Waveform 2 4.5 3.5 5.0 4.0 ns ts(H) ts(L) Setup time, High or Low An or Bn to CPAB or CPBA 74F2953 Waveform 2 4.0 3.5 4.0 4.0 ns th(H) th(L) Hold time, High or Low An or Bn to CPAB or CPBA Waveform 2 0.0 0.0 0.0 0.0 ns ts(H) ts(L) Setup time, High or Low CEAB , CEBA to CPAB, CPBA Waveform 2 0.0 4.0 0.0 4.0 ns th(H) th(L) Hold time, High or Low CEAB , CEBA to CPAB, CPBA Waveform 2 2.5 2.5 2.5 3.0 ns tw (H) tw (L) CPAB or CPBA pulse width, High or Low Waveform 1 3.0 3.5 3.0 3.5 ns

Philips Semiconductors Product specification 74F2952, 74F2953Transceivers

1989 Sep 22 9

For all waveforms, VM = 1.5V. The shaded areas indicate when the input is permitted to change for predictable output. tW (H) CPBA or CPAB An or Bn VM VM VM VM VM 1/fMAX tW (L) tPHL tPLH SF01161 Waveform 1. Propagation Delay, Clock Input to Output, Clock Pulse Width, and Maximum Clock Frequency VM VM VM VM VM VM ts(H) t s(L)th(H) th(H) CPAB, CPBA An, Bn CEAB , CEBA SF01381 Waveform 2. Data Setup and Hold Times VM VM VM tPHZtPZH VOH -0.3V OEAB , OEBA An, Bn SF01382 Waveform 3. 3-State Output Enable Time to High Level and Output Disable Time from High Level VM VM VM tPLZtPZL VOL +0.3V An, Bn OEAB , OEBA SF01383 Waveform 4. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level TEST CIRCUIT AND WAVEFORMS tw 90% VM 10% 90% VM 10% 90% VM 10% 90% VM 10% NEGATIVE PULSE POSITIVE PULSE tw AMP (V) tTHL (tf ) INPUT PULSE REQUIREMENTS rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns Input Pulse Definition VCC family 74F D.U.T.PULSE GENERATOR R LC LR T VIN VOUT Test Circuit for 3-State Outputs DEFINITIONS: R L = Load resistor; see AC electrical characteristics for value. C L = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. R T = Termination resistance should be equal to ZOUT of pulse generators. tTHL (tf ) tTLH (tr ) tTLH (tr ) AMP (V) amplitude 3.0V 1.5V VM R L 7.0V SF00777 TEST SWITCH tPLZ closed tPZL closed All other open SWITCH POSITION

Philips Semiconductors Product specification 74F2952, 74F2953Transceivers

1989 Sep 22 10

DIP24: plastic dual in-line package; 24 leads (300 mil) SOT222-1

Philips Semiconductors Product specification 74F2952, 74F2953Transceivers

1989 Sep 22 11

SO24: plastic small outline package; 24 leads; body width 7.5 mm SOT137-1

Philips Semiconductors Product specification 74F2952, 74F2953Transceivers

1989 Sep 22 12

PLCC28: plastic leaded chip carrier; 28 leads SOT261-2

Philips Semiconductors Product specification 74F2952, 74F2953Transceivers

1989 Sep 22 13

Philips Semiconductors Product specification 74F2952, 74F2953Transceivers

1989 Sep 22 14

Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Philips Semiconductors

811 East Arques Avenue

P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 DEFINITIONS Data Sheet Identification Product Status Definition Objective Specification Preliminary Specification Product Specification Formative or in Design Preproduction Product Full Production This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product. Philips Semiconductors and Philips Electronics North America Corporation register eligible circuits under the Semiconductor Chip Protection Act.  Copyright Philips Electronics North America Corporation 1996 All rights reserved. Printed in U.S.A. print code Date of release: 05-96 Document order number: 9397-750-05202 /C0109 /C0110 /C0114