74F280B PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 8
Technical content
/C0080 /C0115 /C0111/C0110/C0111 /C0115 74F280B 9-bit odd/even parity generator/checker Product specification IC15 Data Handbook
1996 Mar 12
Philips Semiconductors Product specification 74F280B9-bit odd/even parity generator/checker
21996 Mar 12 853-0363 16555
FEATURES
- High-impedance NPN base inputs for reduced loading (20µA in Low and High states)
- Buffered inputs — one normalized load
- Word length easily expanded by cascading
- Industrial temperature range available (–40°C to +85°C)
DESCRIPTION
The 74F280B is a 9-bit Parity Generator or Checker commonly used to detect errors in high speed data transmission or data retrieval systems. Both Even (∑ E) and Odd (∑ O ) parity outputs are available for generating or checking even or odd parity on up to 9 bits. The Even (∑ E) parity output is High when an even number of Data inputs (I0 - I8) are High. The Odd (∑ O ) parity output is High when an odd number of Data inputs are High. Expansion to larger word sizes is accomplished by tying the Even (∑ E) outputs of up to nine parallel devices to the data inputs of the final stage. This expansion scheme allows an 81-bit data word to be checked in less than 20ns. PIN CONFIGURATION
1 VCC
ΣE GND NC ΣO SF00849 TYPE TYPICAL PROPAGATION DELAY TYPICAL SUPPLY CURRENT (TOTAL) 74F280B 5.5ns 26mA
ORDERING INFORMATION
VCC = 5V ±10%, Tamb = 0°C to +70°C INDUSTRIAL RANGE VCC = 5V ±10%, Tamb = –40°C to +85°C PKG. DWG. # 14-pin plastic DIP N74F280BN I74F280BN SOT27-1 14-pin plastic SO N74F280BD I74F280BD SOT108-1 INPUT AND OUTPUT LOADING AND FAN-OUT TABLE PINS DESCRIPTION 74F(U.L.) HIGH/LOW LOAD VALUE HIGH/LOW I0 - I8 Data inputs 1.0/0.033 20µA/20µA ∑ E, ∑ O Parity outputs 50/33 1.0mA/20mA NOTE: One (1.0) FAST Unit Load is defined as: 20µA in the High state and 0.6mA in the Low state. LOGIC SYMBOL 8 9 10 11 12 13 1 2 4 ΣOΣE I0 I1 I2 I3 I4 I5 I6 I7 I8 SF00845 IEC/IEEE SYMBOL O ΣE VCC =Pin 14 GND=Pin 7 SF00846
Philips Semiconductors Product specification 74F280B9-bit odd/even parity generator/checker
1996 Mar 12 3
ΣE ΣO SF00847 VCC =Pin 14 GND=Pin 7 FUNCTION TABLE INPUTS OUTPUTS Number of High Data Inputs (I0 - I8) ∑ E ∑ O Even — 0, 2, 4, 6, 8 H L Odd — 1, 3, 5, 7, 9 L H H = High voltage level L = Low voltage level
Philips Semiconductors Product specification 74F280B9-bit odd/even parity generator/checker
1996 Mar 12 4
SYMBOL PARAMETER RATING UNIT VCC Supply voltage –0.5 to +7.0 V VIN Input voltage –0.5 to +7.0 V IIN Input current –30 to +5 mA VOUT Voltage applied to output in High output state –0.5 to VCC V IOUT Current applied to output in Low output state 40 mA T O perating free air temperature range Commercial range 0 to +70 °C Tamb Operating free-air temperature range Industrial range –40 to +85 °C Tstg Storage temperature –65 to +150 °C RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNITSYMBOL PARAMETER Min Nom Max UNIT VCC Supply voltage 4.5 5.0 5.5 V VIH High-level input voltage 2.0 V VIL Low-level input voltage 0.8 V IIK Input clamp current –18 mA IOH High-level output current –1 mA IOL Low-level output current 20 mA T O perating free air temperature range Commercial range 0 70 °C Tamb Operating free-air temperature range Industrial range –40 85 °C DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST CONDITIONS 1 LIMITS UNITSYMBOL PARAMETER TEST CONDITIONS 1 MIN TYP 2 MAX UNIT VO High level output voltage VCC = MIN, VIL = MAX ±10%V CC 2.5 VVOH High-level output voltage VIH = MIN, IOH = MAX ±5%V CC 2.7 3.4 V VO Low level output voltage VCC = MIN, VIL = MAX ±10%V CC 0.35 0.50 VVOL Low-level output voltage VIH = MIN, IOL = MAX ±5%V CC 0.35 0.50 V VIK Input clamp voltage VCC = MIN, II = IIK –0.73 –1.2 V II Input current at maximum input voltageVCC = 0.0V, VI = 7.0V 100 µA I High level input current Commercial range VCC = MAX V =27 V 20 µA IIH High-level input current Industrial range VCC = MAX , VI = 2.7V 40 µA IIL Low-level input current VCC = MAX, VI = 0.5V –20 µA IOS Short-circuit output current3 VCC = MAX –60 –150 mA ICC Supply current (total) VCC = MAX 26 35 mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25°C. 3. Not more than one output should be shorted at a time. For testing IOS , the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last.
Philips Semiconductors Product specification 74F280B9-bit odd/even parity generator/checker
1996 Mar 12 5
AC ELECTRICAL CHARACTERISTICS LIMITS TEST Tamb = +25°C V =+ 5V Tamb = 0°C to +70°C V =+ 5V ± 10% Tamb = -40°C to +85°C V =+ 5V ± 10%SYMBOL PARAMETER TEST CONDITIONS VCC = +5.V C L = 50pF, VCC = +5.V ± 10% C L = 50pF, VCC = +5.V ± 10% C L = 50pF, UNITCONDITIONS C L = 50pF, R L = 500Ω C L = 50pF, RL = 500Ω C L = 50pF, R L = 500Ω Min Typ Max Min Max Min Max tPLH tPHL Propagation delay I0 - I8 to ΣE 74F280B Waveform 1, 2 4.0 4.0 6.5 7.0 9.0 10.0 3.5 3.5 10.0 11.1 3.0 3.5 11.0 12.0 ns ns tPLH tPHL Propagation delay I 0 - I8 to ΣO 74F280B Waveform 1, 2 4.0 4.0 6.5 7.0 9.0 10.0 3.5 3.5 10.0 11.0 3.0 3.5 11.0 12.0 ns ns AC WAVEFORMS For all waveforms, VM =1.5V. VM VM VM VMI0 - I8 ΣE, ΣO tPHL tPLH SF00848 Waveform 1. Propagation Delay for Inverting Outputs VM VM VM VMI0 - I8 ΣE, ΣO tPLH tPHL SF00850 Waveform 2. Propagation Delay for Non-Inverting Outputs TEST CIRCUIT AND WAVEFORM tw 90% VM 10% 90% VM 10% 90% VM 10% 90% VM 10% NEGATIVE PULSE POSITIVE PULSE tw AMP (V) tTHL (tf ) INPUT PULSE REQUIREMENTS rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns Input Pulse Definition VCC family 74F D.U.T.PULSE GENERATOR R LC LR T VIN VOUT Test Circuit for Totem-Pole Outputs DEFINITIONS: R L = Load resistor; see AC ELECTRICAL CHARACTERISTICS for value. C L = Load capacitance includes jig and probe capacitance; see AC ELECTRICAL CHARACTERISTICS for value. R T = Termination resistance should be equal to ZOUT of pulse generators. tTHL (tf ) tTLH (tr ) tTLH (tr ) AMP (V) amplitude 3.0V 1.5V VM SF00006
Philips Semiconductors Product specification 74F280B9-bit parity odd/even parity generator/checker
1996 Mar 12 6
DIP14: plastic dual in-line package; 14 leads (300 mil) SOT27-1
Philips Semiconductors Product specification 74F280B9-bit parity odd/even parity generator/checker
1996 Mar 12 7
SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1
Philips Semiconductors Product specification 74F280B9-bit parity odd/even parity generator/checker
1996 Mar 12 8
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 Copyright Philips Electronics North America Corporation 1999 All rights reserved. Printed in U.S.A. Date of release: 12-99 Document order number: 9397 750 06706 /C0080 /C0115 /C0111/C0110/C0111 /C0115 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.