74F269_07 FAIRCHILD

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 9

Technical content

Features

Synchronous counting and loading Built-in lookahead carry capability Count frequency 100MHz Supply current 113mA typ. 300mil slimline package General Description The 74F269 is a fully synchronous 8-stage up/down counter featuring a preset capability for programmable operation, carry lookahead for easy cascading and a U/D input to control the direction of counting. All state changes, whether in counting or parallel loading, are initiated by the rising edge of the clock.

Ordering Information

Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. Logic Symbols Connection Diagram Function Table H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial = Transition LOW-to-HIGH Order Number Package Number Package Description 74F269SC M24B 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 74F269SPC N24C 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide IEEE/IEC PE CEP CET U/D CP Function L X X X Parallel Load All Flip-Flops HH XX Hold HX HX Hold (TC Held High) HL LH Count Up H LLL Count Down

74F269 8-Bit Bidirectional Binary Counter ©1988 Fairchild Semiconductor Corporation www.fairchildsemi.com 74F269 Rev. 1.0.2 2 Unit Loading/Fan Out Pin Names Description U.L. HIGH / LOW Input I IH / I IL Output I OH / I OL P Parallel Data Inputs 1.0 / 1.0 20µA / -0.6 mA PE Parallel Enable Input (Active LOW) 1.0 / 1.0 20µA / -0.6mA U/D Up-Down Count Control Input 1.0 / 1.0 20µA / -0.6mA CEP Count Enable Parallel Input (Active LOW) 1.0 / 1.0 20µA / -0.6mA CET Count Enable Trickle Input (Active LOW) 1.0 / 1.0 20µA / -0.6mA CP Clock Input 1.0 / 1.0 20µA / -0.6 mA TC Terminal Count Output (Active LOW) 50 / 33.3 -1mA / 20mA Q Flip-Flop Outputs 50 / 33.3 -1mA / 20mA

74F269 8-Bit Bidirectional Binary Counter ©1988 Fairchild Semiconductor Corporation www.fairchildsemi.com 74F269 Rev. 1.0.2 3 Logic Diagram Figure 1.

74F269 8-Bit Bidirectional Binary Counter ©1988 Fairchild Semiconductor Corporation www.fairchildsemi.com 74F269 Rev. 1.0.2 4 Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Note: 1. Either voltage limit or current limit is sufficient to protect inputs. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter Rating T STG Storage Temperature –65°C to +150°C T A Ambient Temperature Under Bias –55°C to +125°C T J Junction Temperature Under Bias –55°C to +150°C V CC V CC Pin Potential to Ground Pin –0.5V to +7.0V V IN Input Voltage (1) –0.5V to +7.0V I IN Input Current (1) –30mA to +5.0mA V O Voltage Applied to Output in HIGH State (with V CC 0V) Standard Output 3-STATE Output –0.5V to V CC –0.5V to +5.5V Current Applied to Output in LOW State (Max.) twice the rated I OL (mA) Symbol Parameter Rating T A Free Air Ambient Temperature 0°C to +70°C V CC Supply Voltage +4.5V to +5.5V

74F269 8-Bit Bidirectional Binary Counter ©1988 Fairchild Semiconductor Corporation www.fairchildsemi.com 74F269 Rev. 1.0.2 5 Symbol Parameter V CC Conditions Min. Typ. Max. Units V IH Input HIGH Voltage Recognized as a HIGH Signal 2.0 V V IL Input LOW Voltage Recognized as a LOW Signal 0.8 V V CD Input Clamp Diode Voltage Min. I IN –18mA –1.2 V V OH Output HIGH Voltage 10% V CC Min. I OH –1mA 2.5 V 5% V CC 2.7 V OL Output LOW Voltage 10% V CC Min. I OL 20mA 0.5 V I IH Input HIGH Current Max. V IN 2.7V 5.0 µA I BVI Input HIGH Current Breakdown Test Max. V IN 7.0V 7.0 µA I CEX Output HIGH Leakage Current Max. V OUT = V CC 50 µA V ID Input Leakage Test 0.0 I ID 1.9µA, All Other Pins Grounded 4.75 V I OD Output Leakage Circuit Current 0.0 V IOD 150mV, All Other Pins Grounded 3.75 µA I IL Input LOW Current Max. V IN 0.5V –0.6 mA I OS Output Short-Circuit Current Max. V OUT 0.0V –60 –150 mA I CCH Power Supply Current Max. V O HIGH 104 125 mA I CCL Power Supply Current Max. V O LOW 113 135 mA

74F269 8-Bit Bidirectional Binary Counter ©1988 Fairchild Semiconductor Corporation www.fairchildsemi.com 74F269 Rev. 1.0.2 6 AC Operating Requirements Symbol Parameter T A +25°C, V CC +5.0V, C L 50pF T A 0°C to 70°C, V CC +5.0V, C L 50pF f MAX Maximum Count Frequency 100 MHz t PLH Propagation Delay, CP to Q n (Count-Up) 3.5 8.0 3.5 7.0 ns t PHL 4.5 10.5 4.5 11.0 t PLH Propagation Delay, U/D to TC 3.5 7.5 3.5 10.0 ns t PHL 4.5 7.5 4.5 11.0 t PLH Propagation Delay, CET to TC 3.5 7.0 3.5 10.5 ns t PHL 3.0 10.5 3.0 11.5 t PLH Propagation Delay, CP to TC 4.5 10.0 4.5 10.5 ns t PHL 5.0 10.0 4.5 10.5 t PLH Propagation Delay, CP to Q n (Count-Down) 3.5 10.5 3.5 11.0 ns t PHL 4.5 10.5 4.5 11.0 t PLH Propagation Delay, CP to Q n (Load) 3.5 7.0 3.5 10.0 ns t PHL 4.0 7.0 4.0 7.0 Symbol Parameter T A +25°C, V CC +5.0V T A = 0°C to 70°C, VCC = +5.0V UnitsMin. Max. Min. Max. tS(H) Setup Time, HIGH or LOW, Data to CP 3.5 4.0 ns tS(L) 3.0 3.0 tH(H) Hold Time, HIGH or LOW, Data to CP 1.0 2.0 ns tH(L) 1.0 1.0 tS(H) Setup Time, HIGH or LOW, PE to CP 5.5 6.5 ns tS(L) 5.5 6.5 tH(H) Hold Time, HIGH or LOW, PE to CP 00 n s tH(L) 0 0 tS(H) Setup Time, HIGH or LOW, CET or CEP to CP 6.0 6.5 ns tS(L) 8.0 9.0 tH(H) Hold Time, HIGH or LOW, CET or CEP to CP 00 n s tH(L) 0 0 tW(H) Clock Pulse Width, HIGH or LOW 3.5 3.5 ns tW(L) 3.5 4.0 tS(H) Setup Time, HIGH or LOW, U/D to CP 8.0 9.5 ns tS(L) 6.0 7.0 tH(H) Hold Time, HIGH or LOW, U/D to CP 0.0 0.0 ns tH(L) 0.0 0.0

Dimensions are in inches (millimeters) unless otherwise noted. Figure 2. 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide

Dimensions are in millimeters unless otherwise noted. Figure 3. 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide

74F269 8-Bit Bidirectional Binary Counter ©1988 Fairchild Semiconductor Corporation www.fairchildsemi.com 74F269 Rev. 1.0.2 9 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx Across the board. Around the world.¥ ActiveArray¥ Bottomless¥ Build it Now¥ CoolFET¥ CROSSVOLT¥ CTL™ Current Transfer Logic™ DOME¥ E CMOS¥ EcoSPARK EnSigna¥ FACT Quiet Series™ FACT FAST FASTr¥ FPS¥ FRFET GlobalOptoisolator¥ GTO¥ HiSeC¥ i-Lo¥ ImpliedDisconnect¥ IntelliMAX¥ ISOPLANAR¥ MICROCOUPLER¥ MicroPak¥ MICROWIRE¥ MSX¥ MSXPro¥ OCX¥ OCXPro¥ OPTOLOGIC OPTOPLANAR PACMAN¥ POP¥ Power220 Power247 PowerEdge¥ PowerSaver¥ PowerTrench Programmable Active Droop¥ QFET QS¥ QT Optoelectronics¥ Quiet Series¥ RapidConfigure¥ RapidConnect¥ ScalarPump¥ SMART START¥ SPM STEALTH™ SuperFET¥ SuperSOT¥-3 SuperSOT¥-6 SuperSOT¥-8 SyncFET™ TCM¥ The Power Franchise TinyBoost¥ TinyBuck¥ TinyLogic TINYOPTO¥ TinyPower¥ TinyWire¥ TruTranslation¥ PSerDes¥ UHC UniFET¥ VCX¥ Wire¥ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I24