74F2240 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 10

Technical content

/C0109 /C0110 /C0114 74F2240 Octal inverter buffer with 30Ω equivalent output termination (3-State) 74F2241 Octal buffer with 30Ω equivalent output termination (3-State) Product specification IC15 Data Handbook

1990 Dec 13

Philips Semiconductors Product specification 74F2240, 74F2241Octal buffers 2December 13, 1990 853-1524 01255

FEATURES

  • Octal bus interface
  • 30Ω output termination ideal for driving DRAM
  • 15mA source current

DESCRIPTION

The 74F2240 and 74F2241 are octal buffers that are ideal for driving dynamic DRAM with impedance matching. The outputs are all capable of sinking 5mA and sourcing up to 15mA. The device features two output enables, each controlling four of the 3-state outputs. TYPE TYPICAL PROPAGATION DELAY TYPICAL SUPPLY CURRENT (TOTAL) 74F2240 4.3ns 37mA 74F2241 4.5ns 30mA

ORDERING INFORMATION

DESCRIPTION COMMERCIAL RANGE VCC = 5V ±10%, Tamb = 0°C to +70°C PKG DWG # 20-pin plastic DIPN74F2240N, N74F2241N SOT146-1 20-pin plastic SOLN74F2240D, N74F2241D SOT163-1 INPUT AND OUTPUT LOADING AND FAN-OUT TABLE PINS DESCRIPTION 74F (U.L.) HIGH/LOW LOAD VALUE HIGH/LOW Ian, Ibn Data inputs 1.0/0.33 20µA/0.2mA OE a, OEb Output enable inputs (active Low) 1.0/0.33 20µA/0.2mA OEb Output enable input (74F2241) 1.0/0.33 20µA/0.2mA Yan, Ybn Data outputs (74F2241) 750/8.33 15mA/5mA Yan, Ybn Data outputs (74F2240) 750/8.33 15mA/5mA NOTE: One (1.0) FAST unit load is defined as: 20µA in the High state and 0.6mA in the Low state. PIN CONFIGURATION 10 11

20 VCCOE a

Y Ib2 Ya3 Ib3 74F2240 SF00561 LOGIC SYMBOL OEa OEb VCC = Pin 20 GND = Pin 10 2468 1 7 1 5 1 3 1 1 Ia0 Ia1 Ia2 Ia3 Ib0 Ib1 Ib2 Ib3 1 8 1 6 1 4 1 2 3579 Ya0 Ya1 Ya2 Ya3 Yb0 Yb1 Yb2 Yb3 74F2240 SF00562 IEC/IEEE SYMBOL EN1 EN2 74F2240 SF00563

Philips Semiconductors Product specification 74F2240, 74F2241Octal buffers December 13, 1990 3 PIN CONFIGURATION 10 11 VCC = Pin 20 GND = Pin 10 2468 1 7 1 5 1 3 1 1 Ia0 Ia1 Ia2 Ia3 Ib0 Ib1 Ib2 Ib3 1 8 1 6 1 4 1 2 3579 Ya0 Ya1 Ya2 Ya3 Yb0 Yb1 Yb2 Yb3 74F2241 SF00565 IEC/IEEE SYMBOL EN1 EN2 74F2241 SF00566 LOGIC DIAGRAM FOR 74F2240 VCC = Pin 20 GND = Pin 10 Ia0 Ia1 Ia2 Ia3 OE a Ya0 Ya1 Ya2 Ya3 Ib0 Ib1 Ib2 Ib3 OE b Yb0 Yb1 Yb2 Yb3 SF00567 LOGIC DIAGRAM FOR 74F2241 VCC = Pin 20 GND = Pin 10 Ia0 Ia1 Ia2 Ia3 OE a Ya0 Ya1 Ya2 Ya3 Ib0 Ib1 Ib2 Ib OEb Yb0 Yb1 Yb2 Yb3 SF00568 FUNCTION TABLE FOR 74F2240 INPUTS OUTPUTS OE a Ia OE b Ib Ya Yb L L L L H H L H L H L L H X H X Z Z Notes to function table for 74F2240 H = High voltage level L = Low voltage level X = Don’t care Z = High impedance ”off” state FUNCTION TABLE FOR 74F2241 INPUTS OUTPUTS OE a Ia OEb Ib Ya Yb L L H L L L L H H H H H H X L X Z Z Notes to function table for 74F2241 H = High voltage level L = Low voltage level X = Don’t care Z = High impedance ”off” state

Philips Semiconductors Product specification 74F2240, 74F2241Octal buffers December 13, 1990 4 ABSOLUTE MAXIMUM RATINGS (Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free air temperature range.) SYMBOL PARAMETER RATING UNIT VCC Supply voltage –0.5 to +7.0 V VIN Input voltage –0.5 to +7.0 V IIN Input current –30 to +5 mA VOUT Voltage applied to output in high output state –0.5 to VCC V IOUT Current applied to output in low output state 10 mA Tamb Operating free air temperature range 0 to +70 °C Tstg Storage temperature range –65 to +150 °C RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNIT MIN NOM MAX VCC Supply voltage 4.5 5.0 5.5 V VIH High–level input voltage 2.0 V VIL Low–level input voltage 0.8 V IIk Input clamp current –18 mA IOH High–level output current –15 mA IOL Low–level output current 5 mA Tamb Operating free air temperature range 0 +70 °C

Philips Semiconductors Product specification 74F2240, 74F2241Octal buffers December 13, 1990 5 DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST LIMITS UNIT CONDITIONS 1 MIN TYP 2 MAX VCC = MIN, IOH = –3mA ±10%V C C 2.4 V VOH High-level output voltage VIL = MAX, ±5%V CC 2.7 3.4 V VIH = MIN IOH = –15mA ±10%V C C 2.0 V ±5%V CC 2.0 V VOL Low-level output voltage VCC = MIN, VIL = MAX, IOL = MAX ±10%V C C 0.50 V VIH = MIN, ±5%V CC 0.42 0.50 V VIK Input clamp voltage VCC = MIN, II = IIK –0.73 -1.2 V II Input current at maximum input voltage VCC = MAX, VI = 7.0V 100 µA IIH High–level input current VCC = MAX, VI = 2.7V 20 µA IIL Low–level input current VCC = MAX, VI = 0.5V –0.2 mA IOZH Off–state output current, high–level voltage applied VCC = MAX, VO = 2.7V 50 µA IOZL Off–state output current, low–level voltage applied VCC = MAX, VO = 0.5V –50 µA IOS Short–circuit output current3 VCC = MAX -60 -150 mA ICCH 25 35 mA 74F2240 ICCL VCC = MAX 53 75 mA ICC Supply current (total) ICCZ 35 45 mA ICCH 19 30 mA 74F2241 ICCL VCC = MAX 45 65 mA ICCZ 27 40 mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25°C. 3. Not more than one output should be shorted at a time. For testing IOS , the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a high output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. AC ELECTRICAL CHARACTERISTICS LIMITS Tamb = +25°C Tamb = 0°C to +70°C SYMBOL PARAMETER TEST VCC = +5.0V VCC = +5.0V ± 10% UNIT CONDITION C L = 50pF, RL = 500Ω C L = 50pF, RL = 500Ω MIN TYP MAX MIN MAX tPLH tPHL Propagation delay Ian, Ibn to Yn Waveform 1 3.0 2.0 5.0 3.5 7.0 5.5 2.5 2.0 8.0 6.0 ns tPZH tPZL Output enable time to high or low level 74F2240 Waveform 3 Waveform 4 3.0 3.5 4.5 5.0 7.0 8.0 2.5 3.0 8.0 9.0 ns tPHZ tPLZ Output disable time from high or low level Waveform 3 Waveform 4 2.0 1.0 3.5 2.5 6.5 5.5 1.5 1.0 7.0 5.5 ns tPLH tPHL Propagation delay Ian, Ibn to Yn Waveform 2 3.0 2.5 4.5 4.5 7.0 6.5 2.5 2.5 8.0 7.5 ns tPZH tPZL Output enable time to high or low level 74F2241 Waveform 3 Waveform 4 3.0 3.5 5.0 5.5 7.0 7.5 2.0 3.0 8.0 8.5 ns tPHZ tPLZ Output disable time from high or low level Waveform 3 Waveform 4 2.0 1.5 4.0 3.5 6.0 6.0 1.5 1.0 7.0 6.5 ns

Philips Semiconductors Product specification 74F2240, 74F2241Octal buffers December 13, 1990 6 AC WAVEFORMS Ian, Ibn VM VM VMVM tPLHtPHL Yn SF00328 Waveform 1. Propagation delay for inverting outputs VM VM VM tPHZtPZH VOH -0.3V Yn, Yn OE n OEb SF00330 Waveform 3. 3-state output enable time to high level and output disable time from high level Ian, Ibn VM VM VMVM tPHLtPLH Yn SF00329 Waveform 2. Propagation delay for non–inverting outputs VM VM VM tPLZtPZL VOL +0.3V 3.5V OE n OEb Yn, Yn SF00331 Waveform 4. 3-state output enable time to low level and output disable time from low level NOTES: For all waveforms, VM = 1.5V. The shaded areas indicate when the input is permitted to change for predictable output performance. TEST CIRCUIT AND WAVEFORMS tw 90% VM 10% 90% VM 10% 90% VM 10% 90% VM 10% NEGATIVE PULSE POSITIVE PULSE tw AMP (V) tTHL (tf ) INPUT PULSE REQUIREMENTS rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns Input Pulse Definition VCC family 74F D.U.T.PULSE GENERATOR R LC LR T VIN VOUT Test Circuit for Open Collector Outputs DEFINITIONS: R L = Load resistor; see AC electrical characteristics for value. C L = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. R T = Termination resistance should be equal to ZOUT of pulse generators. tTHL (tf ) tTLH (tr ) tTLH (tr ) AMP (V) amplitude 3.0V 1.5V VM R L 7.0V SF00128 TEST SWITCH tPLZ closed tPZL closed All other open SWITCH POSITION

Philips Semiconductors Product specification 74F2240/74F2241Octal buffers

1990 Dec 13 7

DIP20: plastic dual in-line package; 20 leads (300 mil) SOT146-1

Philips Semiconductors Product specification 74F2240/74F2241Octal buffers

1990 Dec 13 8

SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1

Philips Semiconductors Product specification 74F2240/74F2241Octal buffers

1990 Dec 13 9

Philips Semiconductors Product specification 74F2240/74F2241Octal buffers yyyy mmm dd 10 Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors

811 East Arques Avenue

P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381  Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 10-98 Document order number: 9397-750-05197 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.