74F166 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 12
Technical content
/C0109 /C0110 /C0114 74F166 8-bit bidirectional universal shift register Product specification IC15 Data Handbook
1991 Feb 14
Philips Semiconductors Product specification 74F1668-bit bidirectional universal shift register 2Feb. 14, 1991 853–0349 01718
FEATURES
- High impedance NPN base inputs for reduced loading (20µA in high and low states)
- Synchronous parallel to serial applications
- Synchronous serial data input for easy expansion
- Clock enable for ”do nothing” mode
- Asynchronous master reset
- Expandable to 16 bits in 8–bit increments
- Industrial temperature range available (–40°C to +85°C)
DESCRIPTION
The 74F166 is a high speed 8–bit shift register that has fully synchronous serial parallel data entry selected by an active low parallel enable (PE ) input. When the PE is low one setup time before the low–to–high clock transition, parallel data is entered into the register. When PE is high, data is entered into internal bit position Q0 from serial data input (Ds), and the remaining bits are shifted one place to the right (Q0 → Q1 → Q2, etc.) with each positive going clock transition. For expansion of the register in parallel to serial converters, the Q7 output is connected to the Ds input of the succeeding stage. The clock input is gated OR structure which allows one input to be used as an active–low clock enable (CE input. The pin assignment for the CP and CE inputs is arbitrary and can be reversed for layout convenience. The low–to–high transition of CE input should only take place while the CP is high for predictable operation. A low on the master reset (MR ) input overrides all other inputs and clears the register asynchronously, forcing all bit positions to a low state. TYPE TYPICAL fmax TYPICAL SUPPLY CUR- RENT( TOTAL) 74F166 175MHz 50mA
ORDERING INFORMATION
COMMERCIAL RANGE INDUSTRIAL RANGE DESCRIPTION VCC = 5V ±10%, VCC = 5V ±10%, PKG DWG # Tamb = 0°C to +70°C Tamb = –40°C to +85°C 16–pin plastic DIP N74F166N I74F166N SOT38-4 16–pin plastic SO N74F166D I74F166D SOT109-1 INPUT AND OUTPUT LOADING AND FAN OUT TABLE PINS DESCRIPTION 74F (U.L.) HIGH/ LOW LOAD VALUE HIGH/ LOW D0 – D7 Parallel data inputs 1.0/0.033 20µA/20µA Ds Serial data input (shift right) 2.0/0.066 40µA/40µA CP Clock input (active rising edge) 1.0/0.033 20µA/20µA CE Clock enable input (active low) 1.0/0.033 20µA/20µA PE Parallel enable input (active low) 1.0/0.033 20µA/20µA MR Master reset input (active low) 2.0/0.066 40µA/40µA Q7 Data output 50/33 1.0mA/20mA Note to input and output loading and fan out table 1. One (1.0) FAST unit load is defined as: 20µA in the high state and 0.6mA in the low state.
Philips Semiconductors Product specification 74F1668-bit bidirectional universal shift register Feb. 14, 1991 3 PIN CONFIGURATION 107 VCCDs CE CP GND PE MR SP000283 LOGIC SYMBOL Ds D0 D1 D2 D3 D4 D5 D6 D7 VCC = Pin 16 GND = Pin 8 12345 1 0 1 1 1 2 1 4 CE CP MR PE
15 SF00284
1, 3D 2, 3D R M1 [SHIFT] M2 [LOAD] 7 1 C3/1 2,3D SF00285 FUNCTION TABLE INPUTS Qn REGISTER OUTPUT OPERATING MODE PE CE CP DS D0 –D7 Q0 Q1 – Q6 Q7 l l ↑ X l – l L L – L L Parallel load l l ↑ X h – h H H – H H h l ↑ l X – X L q0 – q5 q6 Serial shift h l ↑ h X – X H q0 – q5 q6 X h X X X – X qn q1 – q6 q7 Hold (do nothing) Notes to function table 1. H = High–voltage level 2. h = High voltage level one setup time before the low–to–high clock transition 3. L = Low–voltage level 4. l = Low voltage level one setup time before the low–to–high clock transition 5. qn = Lower case letters indicate the state of the referenced input (or output) one setup time prior to the low–to–high clock transition 6. X = Don’t care 7. ↑ = Low–to–high clock transition
Philips Semiconductors Product specification 74F1668-bit bidirectional universal shift register Feb. 14, 1991 4 LOGIC DIAGRAM VCC = Pin 16 GND = Pin 8 RC P S Q RC P S Q RC P S Q RC P S Q RC P S Q RC P S Q RC P S Q DS PE MR 6CP CE 13 Q7 RC P S Q SF00286
Philips Semiconductors Product specification 74F1668-bit bidirectional universal shift register Feb. 14, 1991 5 ABSOLUTE MAXIMUM RATINGS (Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free air temperature range.) SYMBOL PARAMETER RATING UNIT VCC Supply voltage –0.5 to +7.0 V VIN Input voltage –0.5 to +7.0 V IIN Input current –30 to +5 mA VOUT Voltage applied to output in high output state –0.5 to VCC V IOUT Current applied to output in low output state 40 mA Tamb Operating free air temperature range Commercial range 0 to +70 °C Industrial range –40 to +85 °C Tstg Storage temperature range –65 to +150 °C RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNIT MIN NOM MAX VCC Supply voltage 4.5 5.0 5.5 V VIN High–level input voltage 2.0 V VIL Low–level input voltage 0.8 V IIk Input clamp current –18 mA IOH High–level output current –1 mA IOL Low–level output current 20 mA Tamb Operating free air temperature range Commercial range 0 +70 °C Industrial range –40 +85 °C
Philips Semiconductors Product specification 74F1668-bit bidirectional universal shift register Feb. 14, 1991 6 DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST LIMITS UNIT CONDITIONS 1 MIN TYP 2 MAX VOH High–level output voltage VCC = MIN, VIL = MAX, IOH = MAX ±10%V CC 2.5 V VIH = MIN ±5%V CC 2.7 3.4 V VOL Low–level output voltage VCC = MIN, VIL = MAX, IOL = MAX ±10%V CC 0.30 0.50 V VIH = MIN ±5%V CC 0.30 0.50 V VIK Input clamp voltage VCC = MIN, II = IIK -0.73 -1.2 V II Input current at maximum others VCC = 0.0V, VI = 7.0V 100 µA input voltage CE , CP3 others 20 µA IIH High–level input MR , Ds VCC = MAX, VI = 2.7V 40 µA current Industrialothers 40 µA only MR , Ds 80 µA IIL Low–level input current others VCC = MAX, VI = 0.5V -20 µA MR , Ds -40 µA IOS Short–circuit output current4 VCC = MAX -60 -150 mA ICC Supply current (total) VCC = MAX, PE = CE = Dn = GND, MR = Ds = 4.5V, CP =↑ 50 70 mA Notes to DC electrical characteristics 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25°C. 3. When testing CP, CE must remain in high state, whereas CP must remain in high state when testing CE. 4. Not more than one output should be shorted at a time. For testing IOS , the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a high output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. AC ELECTRICAL CHARACTERISTICS LIMITS Tamb = +25°C Tamb = 0°C to +70°C Tamb = –40°C to +85°C SYMBOL PARAMETER TEST VCC = +5.0V VCC = +5.0V ± 10% VCC = +5.0V ± 10% UNIT CONDITION C L = 50pF, R L = 500Ω C L = 50pF, R L = 500Ω C L = 50pF, R L = 500Ω MIN TYP MAX MIN MAX MIN MAX fmax Maximum clock frequency Waveform 1 135 175 110 100 ns tPLH tPHL Propagation delay CP to Q7 Waveform 1 5.0 4.0 7.5 6.0 10.0 8.0 5.0 3.5 12.0 9.0 5.0 3.5 13.0 9.0 ns tPHL Propagation delay MR
Philips Semiconductors Product specification 74F1668-bit bidirectional universal shift register Feb. 14, 1991 7 AC SETUP REQUIREMENTS LIMITS Tamb = +25°C Tamb = 0°C to +70°C Tamb = –40°C to +85°C SYMBOL PARAMETER TEST VCC = +5.0V VCC = +5.0V ± 10% VCC = +5.0V ± 10% UNIT CONDITION C L = 50pF, R L = 500Ω C L = 50pF, R L = 500Ω C L = 50pF, R L = 500Ω MIN TYP MAX MIN MAX MIN MAX tsu (H) tsu(L) Setup time, high or low Dn, Ds to CP, CE Waveform 3 3.0 2.5 4.0 3.0 4.0 3.0 ns th (H) th (L) Hold time, high or low Dn, Ds to CP Waveform 3 0.0 0.0 1.0 0.0 1.0 0.0 ns th (H) th (L) Hold time, high or low Dn, Ds to CE Waveform 3 1.5 0.0 2.0 0.0 2.0 0.0 ns tsu(L) Setup time, low CE to CP Waveform 3 5.0 6.0 6.0 ns th (H) Hold time, high CE to CP Waveform 3 0.0 0.0 0.0 ns tsu (H) tsu(L) Setup time, high or low PE to CP, CE Waveform 3 3.0 3.0 4.0 4.0 4.0 6.0 ns th (H) th (L) Hold time, high or low PE to CP Waveform 3 0.0 0.0 0.0 0.0 0.0 0.0 ns tw (H) tw (L) CP pulse width, high or low Waveform 1 3.0 4.5 3.5 5.0 3.5 6.0 ns tw (L) MR pulse width, low Waveform 2 4.0 4.0 4.0 ns trec Recovery time, MR to CP Waveform 2 4.0 4.5 4.5 ns AC WAVEFORMS tW (H) CP Q7 VM VM VM VM VM 1/fMAX tW (L) tPHL tPLH SF00287 Waveform 1. Propagation delay for clock input to output, clock pulse width, and maximum clock frequency CP VM VM VMVM tPHL trec MR tw (L) SF00288 SF00288 Waveform 2. Master reset pulse width, master reset to output delay and master reset to clock recovery time
Philips Semiconductors Product specification 74F1668-bit bidirectional universal shift register Feb. 14, 1991 8 tsu VM VM VM VMCE PE Dn Ds CP, CE VM VM VM VM VM VM VM stable VM VM stable VM VM VM VM tsu(L) t h = 0 tsu(L) tsu(H) t h = 0th = 0 tsu(L) t h = 0 t su(H) t h = 0 th = 0 tsu th = 0 SF00289 Waveform 3. Setup and hold times Notes to AC waveforms 1. For all waveforms, VM = 1.5V. 2. The shaded areas indicate when the input is permitted to change for predictable output performance. TEST CIRCUIT AND WAVEFORMS tw 90% VM 10% 90% VM 10% 90% VM 10% 90% VM 10% NEGATIVE PULSE POSITIVE PULSE tw AMP (V) tTHL (tf ) INPUT PULSE REQUIREMENTS rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns Input Pulse Definition VCC family 74F D.U.T.PULSE GENERATOR R LC LR T VIN VOUT Test Circuit for Totem-Pole Outputs DEFINITIONS: R L = Load resistor; see AC ELECTRICAL CHARACTERISTICS for value. C L = Load capacitance includes jig and probe capacitance; see AC ELECTRICAL CHARACTERISTICS for value. R T = Termination resistance should be equal to ZOUT of pulse generators. tTHL (tf ) tTLH (tr ) tTLH (tr ) AMP (V) amplitude 3.0V 1.5V VM SF00006
Philips Semiconductors Product specification 74F1668-bit bidirectional universal shift register
1991 Feb 14 9
DIP16: plastic dual in-line package; 16 leads (300 mil) SOT38-4
Philips Semiconductors Product specification 74F1668-bit bidirectional universal shift register
1991 Feb 14 10
SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1
Philips Semiconductors Product specification 74F1668-bit bidirectional universal shift register
1991 Feb 14 11
Philips Semiconductors Product specification 74F1668-bit bidirectional universal shift register yyyy mmm dd 12 Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 10-98 Document order number: 9397-750-05086 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.