74AVCH4T245FT TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 16

Technical content

CMOS Digital Integrated Circuits Silicon Monolithic 74AVCH4T245FT Start of commercial production 2024-09 1. Functional Description

  • 2-Bit×2 Dual-Supply Bus Transceiver with Bushold and Configurable Power Supply 2. General The 74AVCH4T245FT is a dual-supply, high-speed CMOS 2-bit × 2-circuit bus transceiver with bus hold circuitry that allows interfacing between two systems with supply voltages from 0.8 V to 3.6 V. The two supply voltages can be user-configurable within the operating range and the sequence of supply voltage ON/OFF can be freely set. The bus hold function holds the voltage at the bus terminal input. When the enable input OE is set to "H", the internal buffer is in a high impedance mode and the bus pins (nA, nB) are in bus hold mode. When the transmission direction switching input DIR is set to "H", bus A becomes an input and bus B becomes an output, and when set to "L", bus A becomes an output and bus B becomes an input. The input (DIR and OE) has a tolerant function that allows input of up to 3.6 V regardless of the supply voltage. By setting one or both power supplies to GND, the internal buffer is placed in a high-impedance mode, and the bus terminals supplied with power are placed in bus hold mode. All inputs are equipped with protection circuits to protect the devices from electrostatic discharge damage. 3. Features (1) Wide operating temperature range: Topr = -40 to 125 (2) Wide supply voltage value: VCCA = 0.8 to 3.6 V, VCCB = 0.8 to 3.6 V (3) Bidirectional interface (5) Output current: |IOH|/IOL = ±12 mA (min) (VCC = 3.0 V) |IOH|/IOL = ±9 mA (min) (VCC = 2.3 V) |IOH|/IOL = ±6 mA (min) (VCC = 1.65 V) |IOH|/IOL = ±4 mA (min) (VCC = 1.4 V) |IOH|/IOL = ±2 mA (min) (VCC = 1.1 V) (6) Small package: TSSOP16B (7) Low power dissipation: Suitable for battery-driven applications such as PDAs and cellular phones. (8) 3.6 V tolerance and power-down protection are provided to all inputs and outputs. 4. Packaging TSSOP16B 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation
  1. Pin Assignment 6. Marking 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation
  1. Block Diagram 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation
  1. Truth Table Supply voltage VCCA, VCCB 0.8 to 3.6 V 0.8 to 3.6 V 0.8 to 3.6 V GND (Note) Input nOE L L H X Input nDIR L H X X Input/Output Bus nA1, nA2 Output Input (Bus-Hold) Bus-Hold Z or Bus-Hold Input/Output Bus nB1, nB2 Input (Bus-Hold) Output Bus-Hold Z or Bus-Hold Function A = B B = A Z (Bus-Hold) Z (Bus-Hold) X: Don't care Z: High impedance Note: If either VCCA or VCCB is at GND level, the device is in bus hold mode; if both VCCA and VCCB are at GND level, the device is in suspend mode (high impedance mode for input and output). 9. Absolute Maximum Ratings (Note) Characteristics Supply voltage Input voltage (nDIR, nOE) Bus I/O voltage Input diode current I/O diode current Output current VCC/ground current per supply pin Power dissipation Storage temperature Symbol VCCA VCCB VIN VI/OA VI/OB IIK II/OK IOUTA IOUTB ICCA ICCB PD Tstg Note (Note 1) (Note 2) (Note 1) (Note 2) (Note 3) Rating -0.5 to 4.6 -0.5 to 4.6 -0.5 to 4.6 -0.5 to 4.6 -0.5 to VCCA + 0.5 -0.5 to 4.6 -0.5 to VCCB + 0.5 -50 -50 ±50 ±50 100 100 180 -65 to 150 Unit V V V V mA mA mA mA mW Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: VCCA, VCCB = 0 V Note 2: High (H) or Low (L) state or output high impedance state. IOUT absolute maximum rating must be observed. Note 3: VOUT < GND 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation
  1. Operating Ranges (Note) Characteristics Supply voltage Input voltage (nDIR, nOE) Bus I/O voltage Output current Operating temperature Input rise and fall times Symbol VCCA VCCB VIN VI/OA VI/OB IOUTA IOUTB Topr dt/dv Note (Note 1) (Note 2) (Note 1) (Note 2) (Note 3) Test Condition VCCA = 3.0 to 3.6 V VCCA = 2.3 to 2.7 V VCCA = 1.65 to 1.95 V VCCA = 1.4 to 1.6 V VCCA = 1.1 to 1.3 V VCCB = 3.0 to 3.6 V VCCB = 2.3 to 2.7 V VCCB = 1.65 to 1.95 V VCCB = 1.4 to 1.6 V VCCB = 1.1 to 1.3 V VCC = 0.9 V VCC = 1.2 V VCC = 1.65 to 1.95 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V Rating 0.8 to 3.6 0.8 to 3.6 0 to 3.6 0 to 3.6 0 to VCCA 0 to 3.6 0 to VCCB ±12 ±12 -40 to 125 0 to 20 0 to 20 0 to 20 0 to 20 0 to 10 Unit V V V mA ns/V Note: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs and bus inputs must be tied to either VCC or GND. Note 1: VCCA, VCCB = 0 V Note 2: High (H) or Low (L) state or output high impedance state. IOUT absolute maximum rating must be observed. Note 3: VCC = VCCA, VCCB 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation
  1. Electrical Characteristics 11.1. DC Characteristics (Unless otherwise specified, T a = -40 to 85 ) Characteristics High-level input voltage Low-level input voltage High-level output voltage Low-level output voltage Symbol VIHA VIHB VILA VILB VOHA VOHB VOLA VOLB Test Condition nA, nDIR, nOE nB nA, nDIR, nOE nB Output H Output H Output L Output L IOH = -0.1 mA IOH = -2 mA IOH = -4 mA IOH = -6 mA IOH = -9 mA IOH = -12 mA IOH = -0.1 mA IOH = -2 mA IOH = -4 mA IOH = -6 mA IOH = -9 mA IOH = -12 mA IOL = 0.1 mA IOL = 2 mA IOL = 4 mA IOL = 6 mA IOL = 9 mA IOL = 12 mA IOL = 0.1 mA IOL = 2 mA IOL = 4 mA IOL = 6 mA IOL = 9 mA IOL = 12 mA VCCA (V) 0.8 1.1 to 1.95 2.3 to 2.7 3.0 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 1.1 to 1.95 2.3 to 2.7 3.0 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 VCCB (V) 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 1.1 to 1.95 2.3 to 2.7 3.0 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 1.1 to 1.95 2.3 to 2.7 3.0 to 3.6 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 Min VCCA × 0.70 VCCA × 0.70 1.6 2.0 VCCB × 0.70 VCCB × 0.70 1.6 2.0 VCCA -0.1 0.85 1.05 1.2 1.75 2.3 VCCB -0.1 0.85 1.05 1.2 1.75 2.3 Max VCCA × 0.30 VCCA × 0.30 0.7 0.9 VCCB × 0.30 VCCB × 0.30 0.7 0.9 0.1 0.25 0.35 0.45 0.55 0.7 0.1 0.25 0.35 0.45 0.55 0.7 Unit V V V V 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation

II(HOLD) II(OD) IOFFA IOFFB ICCA ICCB Test Condition Input = 0 V to 3.6 V VI = 0.24 V VI = 0.56 V VI = 0.33 V VI = 0.77 V VI = 0.42 V VI = 0.98 V VI = 0.50 V VI = 1.15 V VI = 0.7 V VI = 1.6 V VI = 0.8 V VI = 2.0 V VI = L → H VI = H → L VI = L → H VI = H → L VI = L → H VI = H → L VI = L → H VI = H → L VI = L → H VI = H → L VI = L → H VI = H → L VIOA = 0 V to 3.6 V VIOB = 0 V to 3.6 V VCCA (V) 0.8 to 3.6 0.8 0.8 1.1 1.1 1.4 1.4 1.65 1.65 2.3 2.3 3.0 3.0 0.8 0.8 1.3 1.3 1.6 1.6 1.95 1.95 2.7 2.7 3.6 3.6 0.8 to 3.6 0.8 to 3.6 3.6 0.8 to 3.6 VCCB (V) 0 to 3.6 0.8 0.8 1.1 1.1 1.4 1.4 1.65 1.65 2.3 2.3 3.0 3.0 0.8 0.8 1.3 1.3 1.6 1.6 1.95 1.95 2.7 2.7 3.6 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 3.6 Min -10 -15 -25 -45 100 -100 110 -110 150 -150 250 -250 400 -400 600 -600 Typ. -10 -15 Max Unit µA µA µA µA µA µA 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation

11.2. DC Characteristics (Unless otherwise specified, T a = -40 to 125 ) Characteristics High-level input voltage Low-level input voltage High-level output voltage Low-level output voltage Symbol VIHA VIHB VILA VILB VOHA VOHB VOLA VOLB Test Condition nA, nDIR, nOE nB nA, nDIR, nOE nB Output H Output H Output L Output L IOH = -0.1 mA IOH = -2 mA IOH = -4 mA IOH = -6 mA IOH = -9 mA IOH = -12 mA IOH = -0.1 mA IOH = -2 mA IOH = -4 mA IOH = -6 mA IOH = -9 mA IOH = -12 mA IOL = 0.1 mA IOL = 2 mA IOL = 4 mA IOL = 6 mA IOL = 9 mA IOL = 12 mA IOL = 0.1 mA IOL = 2 mA IOL = 4 mA IOL = 6 mA IOL = 9 mA IOL = 12 mA VCCA (V) 0.8 1.1 to 1.95 2.3 to 2.7 3.0 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 1.1 to 1.95 2.3 to 2.7 3.0 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 VCCB (V) 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 1.1 to 1.95 2.3 to 2.7 3.0 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 0.8 1.1 to 1.95 2.3 to 2.7 3.0 to 3.6 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 0.8 to 3.6 1.1 1.4 1.65 2.3 3.0 Min VCCA × 0.70 VCCA × 0.70 1.6 2.0 VCCB × 0.70 VCCB × 0.70 1.6 2.0 VCCA -0.1 0.85 1.05 1.2 1.75 2.3 VCCB -0.1 0.85 1.05 1.2 1.75 2.3 Max VCCA × 0.30 VCCA × 0.30 0.7 0.9 VCCB × 0.30 VCCB × 0.30 0.7 0.9 0.1 0.25 0.35 0.45 0.55 0.7 0.1 0.25 0.35 0.45 0.55 0.7 Unit V V V V 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation

II(HOLD) II(OD) IOFFA IOFFB ICCA ICCB Test Condition Input = 0 V to 3.6 V VI = 0.24 V VI = 0.56 V VI = 0.33 V VI = 0.77 V VI = 0.42 V VI = 0.98 V VI = 0.50 V VI = 1.15 V VI = 0.7 V VI = 1.6 V VI = 0.8 V VI = 2.0 V VI = L → H VI = H → L VI = L → H VI = H → L VI = L → H VI = H → L VI = L → H VI = H → L VI = L → H VI = H → L VI = L → H VI = H → L VIOA = 0 V to 3.6 V VIOB = 0 V to 3.6 V VCCA (V) 0.8 to 3.6 0.8 0.8 1.1 1.1 1.4 1.4 1.65 1.65 2.3 2.3 3.0 3.0 0.8 0.8 1.3 1.3 1.6 1.6 1.95 1.95 2.7 2.7 3.6 3.6 0.8 to 3.6 0.8 to 3.6 3.6 0.8 to 3.6 VCCB (V) 0 to 3.6 0.8 0.8 1.1 1.1 1.4 1.4 1.65 1.65 2.3 2.3 3.0 3.0 0.8 0.8 1.3 1.3 1.6 1.6 1.95 1.95 2.7 2.7 3.6 3.6 0.8 to 3.6 0.8 to 3.6 0.8 to 3.6 3.6 Min -10 -15 -25 -45 100 -100 110 -110 150 -150 250 -250 400 -400 600 -600 Typ. -10 -15 Max ±10 ±10 Unit µA µA µA µA µA µA 11.3. AC Characteristics (Note) (V CCA = 0.8 V, T a = 25 ) Characteristics Propagation delay time(B → A) Propagation delay time (B → A) 3-state output disable time (OE → A) 3-state output disable time (OE → B) 3-state output enable time (OE → A) 3-state output enable time (OE → B) Symbol tPLH/tPHL tPLZ/tPHZ tPZL/tPZH VCCB (V) 0.8 V typ. 14.0 14.0 20.9 23.4 22.6 37.6 VCCB (V) 1.2 V typ. 10.5 9.5 21.1 14.5 22.7 20.6 VCCB (V) 1.5 V typ. 9.6 8.7 21.1 12.6 22.8 17.6 VCCB (V) 1.8 V typ. 9.1 8.3 21.2 11.8 22.8 16.2 VCCB (V) 2.5 V typ. 8.8 7.9 21.4 10.5 22.8 15.0 VCCB (V) 3.3 V typ. 8.9 7.7 21.7 10.1 22.7 14.7 Unit ns 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation

11.4. AC Characteristics (Note) (V CCB = 0.8 V, T a = 25 ) Characteristics Propagation delay time (A → B) Propagation delay time (B → A) 3-state output disable time (OE → A) 3-state output disable time (OE → B) 3-state output enable time (OE → A) 3-state output enable time (OE → B) Symbol tPLH/tPHL tPLZ/tPHZ tPZL/tPZH VCCA (V) 0.8 V typ. 14.0 14.0 20.9 23.4 22.6 37.6 VCCA (V) 1.2 V typ. 9.5 10.5 10.6 19.4 9.4 32.2 VCCA (V) 1.5 V typ. 8.7 9.6 7.9 18.4 6.9 31.4 VCCA (V) 1.8 V typ. 8.3 9.1 6.3 18.0 5.8 31.2 VCCA (V) 2.5 V typ. 7.9 8.8 3.8 17.4 4.7 31.1 VCCA (V) 3.3 V typ. 7.7 8.9 2.6 17.1 4.4 31.1 Unit ns 11.5. AC Characteristics (Note) (V CCA = 1.2 ± 0.1 V, T a = -40 to 85 ) Characteristics Propagation delay time (A → B) Propagation delay time (B → A) 3-state output disable time (OE → A) 3-state output disable time (OE → B) 3-state output enable time (OE → A) 3-state output enable time (OE → B) Symbol tPLH/tPHL tPLZ/tPHZ tPZL/tPZH VCCB (V) 1.2 ± 0.1 V Max 10.2 10.2 12.2 13.6 17.7 27.7 VCCB (V) 1.5 ± 0.1 V Max 9.0 8.2 12.2 10.8 18.0 20.0 VCCB (V) 1.8 ± 0.15 V Max 8.5 7.5 12.2 9.5 18.0 17.0 VCCB (V) 2.5 ± 0.2 V Max 7.6 6.7 12.2 7.9 18.0 13.7 VCCB (V) 3.3 ± 0.3 V Max 7.3 6.4 12.3 7.3 18.1 12.5 Unit ns 11.6. AC Characteristics (Note) (V CCA = 1.5 ± 0.1 V, T a = -40 to 85 ) Characteristics Propagation delay time (A → B) Propagation delay time (B → A) 3-state output disable time (OE → A) 3-state output disable time (OE → B) 3-state output enable time (OE → A) 3-state output enable time (OE → B) Symbol tPLH/tPHL tPLZ/tPHZ tPZL/tPZH VCCB (V) 1.2 ± 0.1 V Max 8.2 9.0 8.4 12.1 11.6 25.1 VCCB (V) 1.5 ± 0.1 V Max 6.9 6.9 8.4 9.1 11.7 17.4 VCCB (V) 1.8 ± 0.15 V Max 6.5 6.0 8.4 7.6 11.9 14.4 VCCB (V) 2.5 ± 0.2 V Max 5.9 5.2 8.3 6.1 11.8 11.0 VCCB (V) 3.3 ± 0.3 V Max 5.5 4.9 8.2 5.4 11.8 9.7 Unit ns 11.7. AC Characteristics (Note) (V CCA = 1.8 ± 0.15 V, T a = -40 to 85 ) Characteristics Propagation delay time (A → B) Propagation delay time (B → A) 3-state output disable time (OE → A) 3-state output disable time (OE → B) 3-state output enable time (OE → A) 3-state output enable time (OE → B) Symbol tPLH/tPHL tPLZ/tPHZ tPZL/tPZH VCCB (V) 1.2 ± 0.1 V Max 7.5 8.5 7.3 12.6 9.2 24.2 VCCB (V) 1.5 ± 0.1 V Max 6.0 6.5 7.3 9.3 9.2 16.5 VCCB (V) 1.8 ± 0.15 V Max 5.5 5.5 7.3 7.7 9.3 13.4 VCCB (V) 2.5 ± 0.2 V Max 5.1 4.6 7.3 6.0 9.3 10.0 VCCB (V) 3.3 ± 0.3 V Max 4.8 4.3 7.2 5.2 9.3 8.6 Unit ns 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation

11.8. AC Characteristics (Note) (V CCA = 2.5 ± 0.2 V, T a = -40 to 85 ) Characteristics Propagation delay time (A → B) Propagation delay time (B → A) 3-state output disable time (OE → A) 3-state output disable time (OE → B) 3-state output enable time (OE → A) 3-state output enable time (OE → B) Symbol tPLH/tPHL tPLZ/tPHZ tPZL/tPZH VCCB (V) 1.2 ± 0.1 V Max 6.7 7.6 4.9 11.8 6.7 23.7 VCCB (V) 1.5 ± 0.1 V Max 5.2 5.9 4.9 8.5 6.5 15.8 VCCB (V) 1.8 ± 0.15 V Max 4.6 5.1 4.9 7.0 6.5 12.5 VCCB (V) 2.5 ± 0.2 V Max 4.0 4.0 4.9 5.3 6.5 9.0 VCCB (V) 3.3 ± 0.3 V Max 3.9 3.5 4.9 4.5 6.5 7.5 Unit ns 11.9. AC Characteristics (Note) (V CCA = 3.3 ± 0.3 V, T a = -40 to 85 ) Characteristics Propagation delay time (A → B) Propagation delay time (B → A) 3-state output disable time (OE → A) 3-state output disable time (OE → B) 3-state output enable time (OE → A) 3-state output enable time (OE → B) Symbol tPLH/tPHL tPLZ/tPHZ tPZL/tPZH VCCB (V) 1.2 ± 0.1 V Max 6.4 7.3 5.0 15.7 5.9 23.7 VCCB (V) 1.5 ± 0.1 V Max 4.9 5.5 5.0 11.4 5.3 15.5 VCCB (V) 1.8 ± 0.15 V Max 4.3 4.8 5.0 9.3 5.3 12.1 VCCB (V) 2.5 ± 0.2 V Max 3.5 3.9 5.0 6.5 5.2 8.6 VCCB (V) 3.3 ± 0.3 V Max 3.3 3.3 5.0 5.3 5.2 7.1 Unit ns 11.10. AC Characteristics (Note) (V CCA = 1.2 ± 0.1 V, T a = -40 to 125 ) Characteristics Propagation delay time (A → B) Propagation delay time (B → A) 3-state output disable time (OE → A) 3-state output disable time (OE → B) 3-state output enable time (OE → A) 3-state output enable time (OE → B) Symbol tPLH/tPHL tPLZ/tPHZ tPZL/tPZH VCCB (V) 1.2 ± 0.1 V Max 10.5 10.5 12.5 14.1 18.3 28.6 VCCB (V) 1.5 ± 0.1 V Max 9.4 8.6 12.5 11.3 18.5 21.0 VCCB (V) 1.8 ± 0.15 V Max 8.9 7.9 12.5 10.0 18.6 18.0 VCCB (V) 2.5 ± 0.2 V Max 7.9 7.0 12.5 8.2 18.6 14.5 VCCB (V) 3.3 ± 0.3 V Max 7.6 6.7 12.6 7.6 18.7 13.1 Unit ns 11.11. AC Characteristics (Note) (V CCA = 1.5 ± 0.1 V, T a = -40 to 125 ) Characteristics Propagation delay time (A → B) Propagation delay time (B → A) 3-state output disable time (OE → A) 3-state output disable time (OE → B) 3-state output enable time (OE → A) 3-state output enable time (OE → B) Symbol tPLH/tPHL tPLZ/tPHZ tPZL/tPZH VCCB (V) 1.2 ± 0.1 V Max 8.6 9.4 8.8 12.8 12.3 26.2 VCCB (V) 1.5 ± 0.1 V Max 7.3 7.3 8.9 9.6 12.5 18.4 VCCB (V) 1.8 ± 0.15 V Max 6.9 6.4 8.8 8.0 12.6 15.4 VCCB (V) 2.5 ± 0.2 V Max 6.3 5.5 8.8 6.4 12.5 11.8 VCCB (V) 3.3 ± 0.3 V Max 5.8 5.2 8.7 5.7 12.5 10.3 Unit ns 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation

11.12. AC Characteristics (Note) (V CCA = 1.8 ± 0.15 V, T a = -40 to 125 ) Characteristics Propagation delay time (A → B) Propagation delay time (B → A) 3-state output disable time (OE → A) 3-state output disable time (OE → B) 3-state output enable time (OE → A) 3-state output enable time (OE → B) Symbol tPLH/tPHL tPLZ/tPHZ tPZL/tPZH VCCB (V) 1.2 ± 0.1 V Max 7.9 8.9 7.7 13.4 9.9 25.1 VCCB (V) 1.5 ± 0.1 V Max 6.4 6.9 7.7 9.8 9.9 17.5 VCCB (V) 1.8 ± 0.15 V Max 5.9 5.9 7.6 8.1 9.9 14.4 VCCB (V) 2.5 ± 0.2 V Max 5.5 4.9 7.6 6.3 10.0 10.7 VCCB (V) 3.3 ± 0.3 V Max 5.1 4.6 7.5 5.5 10.0 9.2 Unit ns 11.13. AC Characteristics (Note) (V CCA = 2.5 ± 0.2 V, T a = -40 to 125 ) Characteristics Propagation delay time (A → B) Propagation delay time (B → A) 3-state output disable time (OE → A) 3-state output disable time (OE → B) 3-state output enable time (OE → A) 3-state output enable time (OE → B) Symbol tPLH/tPHL tPLZ/tPHZ tPZL/tPZH VCCB (V) 1.2 ± 0.1 V Max 7.0 7.9 5.2 12.6 7.2 24.5 VCCB (V) 1.5 ± 0.1 V Max 5.5 6.3 5.2 8.9 7.0 16.8 VCCB (V) 1.8 ± 0.15 V Max 4.9 5.5 5.2 7.3 6.9 13.4 VCCB (V) 2.5 ± 0.2 V Max 4.3 4.3 5.2 5.6 6.9 9.6 VCCB (V) 3.3 ± 0.3 V Max 4.2 3.8 5.2 4.7 7.0 8.0 Unit ns 11.14. AC Characteristics (Note) (V CCA = 3.3 ± 0.3 V, T a = -40 to 125 ) Characteristics Propagation delay time (A → B) Propagation delay time (B → A) 3-state output disable time (OE → A) 3-state output disable time (OE → B) 3-state output enable time (OE → A) 3-state output enable time (OE → B) Symbol tPLH/tPHL tPLZ/tPHZ tPZL/tPZH VCCB (V) 1.2 ± 0.1 V Max 6.7 7.6 5.2 16.3 6.3 24.5 VCCB (V) 1.5 ± 0.1 V Max 5.2 5.8 5.2 11.8 5.7 16.5 VCCB (V) 1.8 ± 0.15 V Max 4.6 5.1 5.2 9.6 5.7 13.0 VCCB (V) 2.5 ± 0.2 V Max 3.8 4.2 5.2 6.7 5.6 9.2 VCCB (V) 3.3 ± 0.3 V Max 3.6 3.6 5.2 5.5 5.6 7.6 Unit ns 11.15. Capacitive Characteristics (Unless otherwise specified, T a = 25 ) Characteristics Input capacitance Bus I/O capacitance Power dissipation capacitance Symbol CIN CI/OA CI/OB CPDA CPDB Note (Note 1) (Note 1) Test Condition VIN = 0 V or 3.3 V An = OFF, VIOA = 0 V or 3.3 V Bn = OFF, VIOB = 0 V or 3.3 V A → B B → A A → B B → A VCCA, VCCB 0.8 V Typ. VCCA, VCCB 1.2 V Typ. VCCA, VCCB 1.5 V Typ. VCCA, VCCB 1.8 V Typ. VCCA, VCCB 2.5 V Typ. VCCA, VCCB 3.3 V Typ. Unit pF pF pF pF Note 1: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation. ICC(opr) = CPD × VCC × fIN + ICC/4 (per bit) 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation

  1. AC Test Circuit Fig. 12.1 AC Test Circuit Table 12.1.1 Parameter for AC Test Circuit Parameter tPLH, tPHL tPLZ, tPZL tPHZ, tPZH Switch Open VCC × 2 GND Table 12.1.2 Parameter for AC Test Circuit Symbol RL CL VCC = 3.3 ± 0.3 V 2 kΩ 15 pF VCC = 2.5 ± 0.2 V 2 kΩ 15 pF VCC = 1.8 ± 0.15 V 2 kΩ 15 pF VCC = 1.5 ± 0.1 V 2 kΩ 15 pF VCC = 1.2 ± 0.1 V 2 kΩ 15 pF VCC = 0.8 V 10 kΩ 5 pF 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation
  1. AC Waveform Fig. 13.1 tPLH, tPHL Fig. 13.2 tPLZ, tPHZ, tPZL, tPZH Table 13.1.1 AC Waveform Symbols Symbol VIH VM VX VY VCC = 3.3 ± 0.3 V VCC VCC/2 VOL + 0.3 V VOH - 0.3 V VCC = 2.5 ± 0.2 V VCC = 1.8 ± 0.15 V VCC VCC/2 VOL + 0.15 V VOH - 0.15 V VCC = 1.5 ± 0.1 V VCC = 1.2 ± 0.1 V VCC VCC/2 VOL + 0.1 V VOH - 0.1 V VCC = 0.8 V VCC VCC/2 VOL + 0.1 V VOH - 0.1 V 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation

Unit: mm Weight: 0.055 g (typ.) Package Name(s) Nickname: TSSOP16B 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation

https://toshiba.semicon-storage.com/ RESTRICTIONS ON PRODUCT USE Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as "TOSHIBA". Hardware, software and systems described in this document are collectively referred to as "Product".

  • TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.
  • This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
  • Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
  • PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, lifesaving and/or life supporting medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, and devices related to power plant. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative or contact us via our website.
  • Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
  • Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations.
  • The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
  • ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
  • Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
  • Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS. 2024-09-18 Rev.1.0 ©2024 Toshiba Electronic Devices & Storage Corporation