74AUP2G79 NXP

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 21

Technical content

  1. General description The 74AUP2G79 provides the dual positive-edge triggered D-type flip-flop. Information on the data input (nD) is transferred to the nQ output on the LOW-to-HIGH transition of the clock pulse (nCP). The nD input must be stable one set-up time prior to the LOW-to-HIGH clock transition for predictable operation. Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire V CC range from 0.8 V to 3.6 V. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This device is fully specified for partial power-down applications using IOFF . The IOFF circuitry disables the output, preventing a damaging backflow current through the device when it is powered down. 2. Features n Wide supply voltage range from 0.8 V to 3.6 V n High noise immunity n Complies with JEDEC standards: u JESD8-12 (0.8 V to 1.3 V) u JESD8-11 (0.9 V to 1.65 V) u JESD8-7 (1.2 V to 1.95 V) u JESD8-5 (1.8 V to 2.7 V) u JESD8-B (2.7 V to 3.6 V) n ESD protection: u HBM JESD22-A114E Class 3A exceeds 5000 V u MM JESD22-A115-A exceeds 200 V u CDM JESD22-C101-C exceeds 1000 V n Low static power consumption; ICC = 0.9µA (maximum) n Latch-up performance exceeds 100 mA per JESD78 Class II n Inputs accept voltages up to 3.6 V n Low noise overshoot and undershoot < 10 % of VCC n IOFF circuitry provides partial Power-down mode operation n Multiple package options n Specified from−40 °Ct o+ 8 5°C and −40 °C to +125°C 74AUP2G79 Low-power dual D-type flip-flop; positive-edge trigger Rev. 04 — 30 June 2009 Product data sheet

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. [1] The pin 1 indicator is located on the lower left corner of the device, below the marking code. Table 1. Ordering information Table 2. Marking codes

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 04 — 30 June 2009 3 of 21 NXP Semiconductors 74AUP2G79 Low-power dual D-type flip-flop; positive-edge trigger 6. Pinning information

6.1 Pinning

Fig 3. Logic diagram (one flip-flop) mna442 CP D C C C CC C C C C TG TG TG TG Q C Fig 4. Pin configuration SOT765-1 (VSSOP8) Fig 5. Pin configuration SOT833-1 (XSON8) 74AUP2G79 1CP V CC 1D 1Q 2Q 2D GND 2CP 001aaf268 74AUP2G79 V CC 2CP 1CP GND 001aaf269 Transparent top view

74AUP2G79_4 © NXP B.V. 2009. All rights reserved.

6.2 Pin description

q = lower case letter indicates the state of referenced input, one set-up time prior to the LOW-to-HIGH CP transition. Table 3. Pin description Table 4. Function table[1]

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. [1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For VSSOP8 packages: above 110°C the value of Ptotderates linearly with 8.0 mW/K. For XSON8, XSON8U and XQFN8U packages: above 118°C the value of Ptotderates linearly with 7.8 mW/K.

  1. Recommended operating conditions

Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Table 6. Operating conditions

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. Table 7. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V).

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. Table 7. Static characteristics …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V).

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. [1] One input at VCC − 0.6 V, other input at VCC or GND. At recommended operating conditions; voltages are referenced to GND (ground = 0 V).

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. Table 8. Dynamic characteristics Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure10.

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. Table 8. Dynamic characteristics …continued Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure10.

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure10.

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. [1] All typical values are measured at nominal VCC . [2] tpd is the same as tPLH and tPHL . [3] C PD is used to determine the dynamic power dissipation (PD inµW). L × VCC 2 × fo) = sum of the outputs. Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure10. Measurement points are given inTable9. Logic levels: VOL and VOH are typical output voltage levels that occur with the output load.

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. Measurement points are given inTable9. Logic levels: VOL and VOH are typical output voltage levels that occur with the output load. The shaded areas indicate when the input is permitted to change for predictable output performance. Table 9. Measurement points

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. [1] For measuring enable and disable times RL = 5 kΩ . For measuring propagation delays, set-up and hold times and pulse width RL = 1 MΩ . Test data is given inTable10. C L = Load capacitance including jig and probe capacitance. R T = Termination resistance should be equal to the output impedance Zo of the pulse generator. VEXT = External voltage for measuring switching times. Table 10. Test data

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 04 — 30 June 2009 15 of 21 NXP Semiconductors 74AUP2G79 Low-power dual D-type flip-flop; positive-edge trigger 13. Package outline Fig 11. Package outline SOT765-1 (VSSOP8) UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(2) Z(1) q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.00 0.85 0.60 0.27 0.17 0.23 0.08 2.1 1.9 2.4 2.2 0.5 3.2 3.0 0.4 0.1 0°0.13 0.10.20.4 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. 0.40 0.15 Q 0.21 0.19 SOT765-1 MO-187 02-06-07 w Mbp D Z e 0.12 8 5 q Q Lp (A3) detail X A L H E E c v M A X A y 2.5 5 mm0 scale VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1 pin 1 index

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 04 — 30 June 2009 16 of 21 NXP Semiconductors 74AUP2G79 Low-power dual D-type flip-flop; positive-edge trigger Fig 12. Package outline SOT833-1 (XSON8) terminal 1 index area REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT833-1 07-11-14 07-12-07 DIMENSIONS (mm are the original dimensions) XSON8: plastic extremely thin small outline package; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm D E e b LL1 e1 e1 0 1 2 mm scale Notes 1. Including plating thickness. 2. Can be visible in some manufacturing processes. UNIT mm 0.25 0.17 2.0 1.9 0.35 0.27 A max b E 1.05 0.95 D ee 1 L 0.40 0.32 0.50.6 A (1) max 0.5 0.04 (2) (2) A

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 04 — 30 June 2009 17 of 21 NXP Semiconductors 74AUP2G79 Low-power dual D-type flip-flop; positive-edge trigger Fig 13. Package outline SOT996-2 (XSON8U) REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT996-2 07-12-18 07-12-21 UNIT A max mm 0.5 0.05 0.00 0.35 0.15 3.1 2.9 0.5 1.5 0.5 0.3 0.6 0.4 0.1 0.05 A 1 DIMENSIONS (mm are the original dimensions) XSON8U: plastic extremely thin small outline package; no leads; 8 terminals; UTLP based; body 3 x 2 x 0.5 mm 0 1 2 mm scale b D 2.1 1.9 E e e1 L L1 0.15 0.05 L2 v w 0.05 y y1 0.1 C yCy1 X b e AC Bv M Cw M L terminal 1 index area B AD E detail X A A1

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 04 — 30 June 2009 18 of 21 NXP Semiconductors 74AUP2G79 Low-power dual D-type flip-flop; positive-edge trigger Fig 14. Package outline SOT902-1 (XQFN8U) REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT902-1 05-11-25 07-11-14 UNIT A max mm 0.5 A 1 0.25 0.15 0.05 0.00 1.65 1.55 0.35 0.25 0.15 0.05 DIMENSIONS (mm are the original dimensions) XQFN8U: plastic extremely thin quad flat package; no leads; 8 terminals; UTLP based; body 1.6 x 1.6 x 0.5 mm b DL e1 1.65 1.55 eE L1 v 0.10.55 0.5 w 0.05 y 0.05 0.05 0 1 2 mm scale X C yCy1 terminal 1 index area terminal 1 index area B AD E detail X A b ee AC B˘ v M C˘ w M4 L metal area not for soldering

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. Table 11. Abbreviations Table 12. Revision history

  • Table5: Derating factor of XSON8, XSON8U and XQFN8U packages has been changed. 74AUP2G79_3 20090401 Product data sheet - 74AUP2G79_2 74AUP2G79_2 20080319 Product data sheet - 74AUP2G79_1 74AUP2G79_1 20061006 Product data sheet - -

74AUP2G79_4 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 04 — 30 June 2009 20 of 21 NXP Semiconductors 74AUP2G79 Low-power dual D-type flip-flop; positive-edge trigger 16. Legal information

16.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.

16.2 Definitions

Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.

16.3 Disclaimers

General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use —NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale —NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control —This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities.

16.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 17. Contact information For more information, please visit:http://www.nxp.com For sales office addresses, please send an email to:salesaddresses@nxp.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.

NXP Semiconductors 74AUP2G79 Low-power dual D-type flip-flop; positive-edge trigger © NXP B.V. 2009. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 30 June 2009 Document identifier: 74AUP2G79_4 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 18. Contents