74AUP2G32 NXP
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 17
Technical content
- General description The 74AUP2G32 provides the dual 2-input OR function. Schmitt-trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This device is fully specified for partial power-down applications using IOFF . The IOFF circuitry disables the output, preventing a damaging backflow current through the device when it is powered down. 2. Features n Wide supply voltage range from 0.8 V to 3.6 V n High noise immunity n Complies with JEDEC standards: u JESD8-12 (0.8 V to 1.3 V) u JESD8-11 (0.9 V to 1.65 V) u JESD8-7 (1.2 V to 1.95 V) u JESD8-5 (1.8 V to 2.7 V) u JESD8-B (2.7 V to 3.6 V) n ESD protection: u HBM JESD22-A114E Class 3A exceeds 5 000 V u MM JESD22-A115-A exceeds 200 V u CDM JESD22-C101C exceeds 1000 V n Low static power consumption; ICC = 0.9µA (maximum) n Latch-up performance exceeds 100 mA per JESD 78 Class II n Inputs accept voltages up to 3.6 V n Low noise overshoot and undershoot < 10 % of VCC n IOFF circuitry provides partial Power-down mode operation n Multiple package options n Specified from−40 °C to +85°C and −40 °C to +125°C 74AUP2G32 Low-power dual 2-input OR gate Rev. 03 — 8 January 2009 Product data sheet
74AUP2G32_3 © NXP B.V. 2009. All rights reserved. Table 1. Ordering information Table 2. Marking codes
74AUP2G32_3 © NXP B.V. 2009. All rights reserved.
6.1 Pinning
6.2 Pin description
Table 3. Pin description
74AUP2G32_3 © NXP B.V. 2009. All rights reserved. [1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For VSSOP8 packages: above 110°C the value of Ptot derates linearly with 8.0 mW/K. For XSON8, XSON8U and XQFN8U packages: above 45°C the value of Ptotderates linearly with 2.4 mW/K.
- Recommended operating conditions
Table 4. Function table[1] Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Table 6. Operating conditions
74AUP2G32_3 © NXP B.V. 2009. All rights reserved. Table 7. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
74AUP2G32_3 © NXP B.V. 2009. All rights reserved. Table 7. Static characteristics …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
74AUP2G32_3 © NXP B.V. 2009. All rights reserved. [1] One input at VCC − 0.6 V, other input at VCC or GND. At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
74AUP2G32_3 © NXP B.V. 2009. All rights reserved. Table 8. Dynamic characteristics Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure9.
74AUP2G32_3 © NXP B.V. 2009. All rights reserved. [1] All typical values are measured at nominal VCC . [2] tpd is the same as tPLH and tPHL . [3] C PD is used to determine the dynamic power dissipation (PD inµW). L × VCC 2 × fo) = sum of the outputs. Table 8. Dynamic characteristics …continued Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure9. Measurement points are given inTable9. Logic levels: VOL and VOH are typical output voltage levels that occur with the output load. Table 9. Measurement points
74AUP2G32_3 © NXP B.V. 2009. All rights reserved. Test data is given inTable10. C L = Load capacitance including jig and probe capacitance. R T = Termination resistance should be equal to the output impedance Zo of the pulse generator. VEXT = External voltage for measuring switching times. Table 10. Test data
74AUP2G32_3 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 03 — 8 January 2009 11 of 17 NXP Semiconductors 74AUP2G32 Low-power dual 2-input OR gate 13. Package outline Fig 10. Package outline SOT765-1 (VSSOP8) UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(2) Z(1) q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.00 0.85 0.60 0.27 0.17 0.23 0.08 2.1 1.9 2.4 2.2 0.5 3.2 3.0 0.4 0.1 0°0.13 0.10.20.4 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. 0.40 0.15 Q 0.21 0.19 SOT765-1 MO-187 02-06-07 w Mbp D Z e 0.12 8 5 q Q Lp (A3) detail X A L H E E c v M A X A y 2.5 5 mm0 scale VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1 pin 1 index
74AUP2G32_3 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 03 — 8 January 2009 12 of 17 NXP Semiconductors 74AUP2G32 Low-power dual 2-input OR gate Fig 11. Package outline SOT833-1 (XSON8) terminal 1 index area REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT833-1 07-11-14 07-12-07 DIMENSIONS (mm are the original dimensions) XSON8: plastic extremely thin small outline package; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm D E e b LL1 e1 e1 0 1 2 mm scale Notes 1. Including plating thickness. 2. Can be visible in some manufacturing processes. UNIT mm 0.25 0.17 2.0 1.9 0.35 0.27 A max b E 1.05 0.95 D ee 1 L 0.40 0.32 0.50.6 A (1) max 0.5 0.04 (2) (2) A
74AUP2G32_3 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 03 — 8 January 2009 13 of 17 NXP Semiconductors 74AUP2G32 Low-power dual 2-input OR gate Fig 12. Package outline SOT996-2 (XSON8U) REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT996-2 07-12-18 07-12-21 UNIT A max mm 0.5 0.05 0.00 0.35 0.15 3.1 2.9 0.5 1.5 0.5 0.3 0.6 0.4 0.1 0.05 A 1 DIMENSIONS (mm are the original dimensions) XSON8U: plastic extremely thin small outline package; no leads; 8 terminals; UTLP based; body 3 x 2 x 0.5 mm 0 1 2 mm scale b D 2.1 1.9 E e e1 L L1 0.15 0.05 L2 v w 0.05 y y1 0.1 C yCy1 X b e AC Bv M Cw M L terminal 1 index area B AD E detail X A A1
74AUP2G32_3 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 03 — 8 January 2009 14 of 17 NXP Semiconductors 74AUP2G32 Low-power dual 2-input OR gate Fig 13. Package outline SOT902-1 (XQFN8U) REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT902-1 05-11-25 07-11-14 UNIT A max mm 0.5 A 1 0.25 0.15 0.05 0.00 1.65 1.55 0.35 0.25 0.15 0.05 DIMENSIONS (mm are the original dimensions) XQFN8U: plastic extremely thin quad flat package; no leads; 8 terminals; UTLP based; body 1.6 x 1.6 x 0.5 mm b DL e1 1.65 1.55 eE L1 v 0.10.55 0.5 w 0.05 y 0.05 0.05 0 1 2 mm scale X C yCy1 terminal 1 index area terminal 1 index area B AD E detail X A b ee AC B˘ v M C˘ w M4 L metal area not for soldering
74AUP2G32_3 © NXP B.V. 2009. All rights reserved. Table 11. Abbreviations Table 12. Revision history
- Added type number 74AUP2G32GD (XSON8U package). 74AUP2G32_2 20080228 Product data sheet - 74AUP2G32_1 74AUP2G32_1 20061006 Product data sheet - -
74AUP2G32_3 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 03 — 8 January 2009 16 of 17 NXP Semiconductors 74AUP2G32 Low-power dual 2-input OR gate 16. Legal information
16.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
16.2 Definitions
Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.
16.3 Disclaimers
General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use —NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale —NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.
16.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 17. Contact information For more information, please visit:http://www.nxp.com For sales office addresses, please send an email to:salesaddresses@nxp.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
NXP Semiconductors 74AUP2G32 Low-power dual 2-input OR gate © NXP B.V. 2009. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 8 January 2009 Document identifier: 74AUP2G32_3 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 18. Contents