74AUP2G125 NXP
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 21
Technical content
- General description The 74AUP2G125 provides the dual non-inverting buffer/line driver with 3-state output. The 3-state output is controlled by the output enable input (nOE). A HIGH level at pin nOE causes the output to assume a high-impedance OFF-state. This device has the input-disable feature, which allows floating input signals. The inputs are disabled when the output enable input n OE) is HIGH. Schmitt-trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This device is fully specified for partial power-down applications using IOFF . The IOFF circuitry disables the output, preventing a damaging backflow current through the device when it is powered down. 2. Features n Wide supply voltage range from 0.8 V to 3.6 V n High noise immunity n Complies with JEDEC standards: u JESD8-12 (0.8 V to 1.3 V) u JESD8-11 (0.9 V to 1.65 V) u JESD8-7 (1.2 V to 1.95 V) u JESD8-5 (1.8 V to 2.7 V) u JESD8-B (2.7 V to 3.6 V) n ESD protection: u HBM JESD22-A114F Class 3A exceeds 5000 V u MM JESD22-A115-A exceeds 200 V u CDM JESD22-C101D exceeds 1000 V n Low static power consumption; ICC = 0.9µA (maximum) n Latch-up performance exceeds 100 mA per JESD78B Class II n Inputs accept voltages up to 3.6 V n Low noise overshoot and undershoot < 10 % of VCC n Input-disable feature allows floating input conditions n IOFF circuitry provides partial Power-down mode operation n Multiple package options n Specified from−40 °Ct o+ 8 5°C and −40 °C to +125°C 74AUP2G125 Low-power dual buffer/line driver; 3-state Rev. 06 — 27 November 2009 Product data sheet
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. [1] The pin 1 indicator is located on the lower left corner of the device, below the marking code. Table 1. Ordering information Table 2. Marking codes
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 06 — 27 November 2009 3 of 21 NXP Semiconductors 74AUP2G125 Low-power dual buffer/line driver; 3-state 6. Pinning information
6.1 Pinning
Fig 3. Logic diagram (one gate) mna227 nOE nA nY Fig 4. Pin configuration SOT765-1 (VSSOP8) Fig 5. Pin configuration SOT833-1 and SOT1089 (XSON8) 74AUP2G125 1OE V CC 1A 2OE 2Y 1Y GND 2A 001aae973 74AUP2G125 2OE V CC 1OE GND 001aae974 Transparent top view Fig 6. Pin configuration SOT996-2 (XSON8U) Fig 7. Pin configuration SOT902-1 (XQFN8U) 001aaj471 74AUP2G125 Transparent top view 1OE GND V CC 2OE 001aae975 1A1Y 1OE VCC 2OE GND Transparent top view terminal 1 index area 74AUP2G125
74AUP2G125_6 © NXP B.V. 2009. All rights reserved.
6.2 Pin description
Z = high-impedance OFF-state. [1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For VSSOP8 packages: above 110°C the value of Ptot derates linearly with 8.0 mW/K. For XSON8, XSON8U and XQFN8U packages: above 118°C the value of Ptotderates linearly with 7.8 mW/K. Table 3. Pin description Table 4. Function table[1] Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
74AUP2G125_6 © NXP B.V. 2009. All rights reserved.
- Recommended operating conditions
Table 6. Operating conditions Table 7. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. Table 7. Static characteristics …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. [1] One input at VCC − 0.6 V, other input at VCC or GND. [2] To show ICC remains very low when the input-disable feature is enabled. At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Table 8. Dynamic characteristics Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure10.
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. Table 8. Dynamic characteristics …continued Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure10.
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure10.
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. [1] All typical values are measured at nominal VCC . [2] tpd is the same as tPLH and tPHL . [3] ten is the same as tPZH and tPZL . [4] tdis is the same as tPHZ and tPLZ . [5] C PD is used to determine the dynamic power dissipation (PD inµW). L × VCC 2 × fo) = sum of the outputs. Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure10.
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. Measurement points are given inTable9. Logic levels: VOL and VOH are typical output voltage levels that occur with the output load. Table 9. Measurement points Measurement points are given inTable10. Logic levels: VOL and VOH are typical output voltage levels that occur with the output load. Table 10. Measurement points
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. [1] For measuring enable and disable times RL = 5 kΩ . For measuring propagation delays, set-up and hold times, and pulse width, RL = 1 MΩ . Test data is given inTable11. C L = Load capacitance including jig and probe capacitance. R T = Termination resistance should be equal to the output impedance Zo of the pulse generator. VEXT = External voltage for measuring switching times. Table 11. Test data
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 06 — 27 November 2009 14 of 21 NXP Semiconductors 74AUP2G125 Low-power dual buffer/line driver; 3-state 13. Package outline Fig 11. Package outline SOT765-1 (VSSOP8) UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(2) Z(1) q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.00 0.85 0.60 0.27 0.17 0.23 0.08 2.1 1.9 2.4 2.2 0.5 3.2 3.0 0.4 0.1 0°0.13 0.10.20.4 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. 0.40 0.15 Q 0.21 0.19 SOT765-1 MO-187 02-06-07 w Mbp D Z e 0.12 8 5 q Q Lp (A3) detail X A L H E E c v M A X A y 2.5 5 mm0 scale VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1 pin 1 index
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 06 — 27 November 2009 15 of 21 NXP Semiconductors 74AUP2G125 Low-power dual buffer/line driver; 3-state Fig 12. Package outline SOT833-1 (XSON8) terminal 1 index area REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT833-1 07-11-14 07-12-07 DIMENSIONS (mm are the original dimensions) XSON8: plastic extremely thin small outline package; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm D E e b LL1 e1 e1 0 1 2 mm scale Notes 1. Including plating thickness. 2. Can be visible in some manufacturing processes. UNIT mm 0.25 0.17 2.0 1.9 0.35 0.27 A max b E 1.05 0.95 D ee 1 L 0.40 0.32 0.50.6 A (1) max 0.5 0.04 (2) (2) A
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 06 — 27 November 2009 16 of 21 NXP Semiconductors 74AUP2G125 Low-power dual buffer/line driver; 3-state Fig 13. Package outline SOT1089 (XSON8) ReferencesOutline version European projection Issue date IEC JEDEC JEITA SOT1089 MO-252 sot1089_po 09-04-10 09-10-22 Unit mm max nom min 0.5 0.04 1.40 1.35 1.30 1.05 1.00 0.95 0.55 0.35 0.20 0.15 0.12 A (1) Dimensions Note 1. Including plating thickness. 2. Visible depending upon used manufacturing technology. XSON8: extremely thin small outline package; no leads; 8 terminals; body 1.35 x 1 x 0.5 mm SOT1089 A1 bb 1 0.40 0.35 0.32 0.35 0.30 0.27 DEee 1 L 0 0.5 1 mm scale terminal 1 index area E D detail X A b L e terminal 1 index area (4×)(2) (8×)(2) X
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 06 — 27 November 2009 17 of 21 NXP Semiconductors 74AUP2G125 Low-power dual buffer/line driver; 3-state Fig 14. Package outline SOT996-2 (XSON8U) REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT996-2 07-12-18 07-12-21 UNIT A max mm 0.5 0.05 0.00 0.35 0.15 3.1 2.9 0.5 1.5 0.5 0.3 0.6 0.4 0.1 0.05 A 1 DIMENSIONS (mm are the original dimensions) XSON8U: plastic extremely thin small outline package; no leads; 8 terminals; UTLP based; body 3 x 2 x 0.5 mm 0 1 2 mm scale b D 2.1 1.9 E e e1 L L1 0.15 0.05 L2 v w 0.05 y y1 0.1 C yCy1 X b e AC Bv M Cw M L terminal 1 index area B AD E detail X A A1
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 06 — 27 November 2009 18 of 21 NXP Semiconductors 74AUP2G125 Low-power dual buffer/line driver; 3-state Fig 15. Package outline SOT902-1 (XQFN8U) REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT902-1 05-11-25 07-11-14 UNIT A max mm 0.5 A 1 0.25 0.15 0.05 0.00 1.65 1.55 0.35 0.25 0.15 0.05 DIMENSIONS (mm are the original dimensions) XQFN8U: plastic extremely thin quad flat package; no leads; 8 terminals; UTLP based; body 1.6 x 1.6 x 0.5 mm b DL e1 1.65 1.55 eE L1 v 0.10.55 0.5 w 0.05 y 0.05 0.05 0 1 2 mm scale X C yCy1 terminal 1 index area terminal 1 index area B AD E detail X A b ee AC B˘ v M C˘ w M4 L metal area not for soldering
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. Table 12. Abbreviations Table 13. Revision history
- Added type number 74AUP2G125GF (XSON8 package) 74AUP2G125_5 20090202 Product data sheet - 74AUP2G125_4 74AUP2G125_4 20090122 Product data sheet - 74AUP2G125_3 74AUP2G125_3 20080409 Product data sheet - 74AUP2G125_2 74AUP2G125_2 20070419 Product data sheet - 74AUP2G125_1 74AUP2G125_1 20061017 Product data sheet - -
74AUP2G125_6 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 06 — 27 November 2009 20 of 21 NXP Semiconductors 74AUP2G125 Low-power dual buffer/line driver; 3-state 16. Legal information
16.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
16.2 Definitions
Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.
16.3 Disclaimers
General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use —NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale —NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control —This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities.
16.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 17. Contact information For more information, please visit:http://www.nxp.com For sales office addresses, please send an email to:salesaddresses@nxp.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
NXP Semiconductors 74AUP2G125 Low-power dual buffer/line driver; 3-state © NXP B.V. 2009. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 27 November 2009 Document identifier: 74AUP2G125_6 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 18. Contents