74AUP1T97 FAIRCHILD

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 11

Technical content

Features

ƒ Single Supply Voltage Translator - 1.8V to 3.3V Input at V CC=3.3V - 1.8V to 2.5V Input at V CC=2.5V ƒ 2.3V to 3.6V VCC Supply Voltage Operation ƒ 3.6V Over-Voltage Tolerant I/O’s at VCC from 2.3V to 3.6V ƒ Power-Off High-Impedance Inputs and Outputs ƒ Low Static Power Consumption - ICC=0.9µA Maximum ƒ Low Dynamic Power Consumption - CPD=2.7pF Typical at 3.3V ƒ Ultra-Small MicroPak™ Packages

Description

The 74AUP1T97 is a universal configurable 2-input logic gate that provides single supply voltage level translation. This device is designed for applications with inputs switching levels that accept 1.8V low voltage CMOS signals while operating from either a single 2.5V or 3.3V supply voltage. The 74AUP1T97 is an ideal low power solution for mixed voltage signal applications especially for battery-powered portable applications. This product guarantees very low static and dynamic power consumption across entire voltage range. All inputs are implemented with hysteresis to allow for slower transition input signals and better switching noise immunity. The 74AUP1T97 provides for multiple functions as determined by various configurations of the three inputs. The potential logic functions provided are MUX, AND, NAND, OR, and NOR, inverter and buffer. Refer to Figures 3 to 9.

Ordering Information

Part Number Top Mark Package Packing Method 74AUP1T97L6X AH 6-Lead MicroPak™, 1.0mm Wide 5000 Units on Tape & Reel 74AUP1T97FHX AH 6-Lead, MicroPak 2™, 1x1mm Body, .35mm Pitch 5000 Units on Tape & Reel

Figure 1. Logic Diagram (Positive Logic) Figure 2. MicroPak™ (Top Through View)

1 B Data Input

2 GND Ground

3 A Data Input

4 Y Output

5 V CC Supply Voltage

6 C Data Input

© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 74AUP1T97 • 1.0.3 3 74AUP1T97 — TinyLogic® Low Power Configurable Gate with Voltage-Level Translator Function Table Inputs 74AUPIT97 C B A Y=Output L L L L L L H L L H L H L H H H H L L L H L H H H H L L H H H H H = HIGH Logic Level L = LOW Logic Level Function Selection Table Logic Function Connecti on Configuration 2-to-1 MUX Figure 3 2-Input AND Gate Figure 4 2-Input OR Gate with One Inverted Input Figure 5 2-Input NAND Gate with One Inverted Input Figure 5 2-Input AND Gate with One Inverted Input Figure 6 2-Input NOR Gate with One Inverted Input Figure 6 2-Input OR Gate Figure 7 Inverter Figure 8 Buffer Figure 9

© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 74AUP1T97 • 1.0.3 5 74AUP1T97 — TinyLogic® Low Power Configurable Gate with Voltage-Level Translator Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit VCC Supply Voltage -0.5 4.6 V VIN DC Input Voltage -0.5 4.6 V VOUT DC Output Voltage HIGH or LOW State(3) -0.5 V CC + 0.5 V VCC=0V -0.5 4.6 IIK DC Input Diode Current V IN < 0V -50 mA IOK DC Output Diode Current VOUT < 0V -50 mA VOUT > VCC +50 IOH / IOL DC Output Source / Sink Current ±50 mA IO Continuous Output Current ±20 mA ICC or IGND DC V CC or Ground Current per Supply Pin ±50 mA TSTG Storage Temperature Range -65 +150 °C TJ Junction Temperature Under Bias +150 °C TL Junction Lead Temperature, Soldering 10s +260 °C PD Power Dissipation at +85°C MicroPak-6 130 mW MicroPak2-6 120 ESD Human Body Model, JEDEC:JESD22-A114 5000+ V Charged Device Model, JEDEC:JESD22-C101 2000 Note: 3. I O absolute maximum rating must be observed. Recommended Operating Conditions(4) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ens ure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Conditions Min. Max. Unit VCC Supply Voltage 2.3 3.6 V VIN Input Voltage 0 3.6 V VOUT Output Voltage VCC=0V 0 3.6 V HIGH or LOW State 0 V CC TA Operating Temperature, Free Air -40 +85 °C θJA Thermal Resistance MicroPak-6 500 °C/W MicroPak2-6 560 Note: 4. Unused inputs must be held HIGH or LOW. They may not float.

© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 74AUP1T97 • 1.0.3 6 74AUP1T97 — TinyLogic® Low Power Configurable Gate with Voltage-Level Translator Symbol Parameter V CC Conditions TA=+25°C T A=-40 to +85°C Units Min. Max. Min. Max. VP Positive Threshold Voltage 2.3V to 2.7V 0.60 1.10 0.60 1.10 V VN Negative Threshold Voltage 2.3V to 2.7V 0.35 0.60 0.35 0.60 V VH Hysteresis Voltage 2.3V to 2.7V 0.23 0.60 0.10 0.60 V VOH HIGH Level Output Voltage 2.3V ≤ VCC ≤ 3.6V IOH=-20µA V CC-0.1 V CC-0.1 V 2.3V IOH=-2.3mA 2.05 1.97 IOH=-3.1mA 1.90 1.85 3.0V IOH=-2.7mA 2.72 2.67 IOH=-4mA 2.60 2.55 VOL LOW Level Output Voltage 2.3V ≤ VCC ≤ 3.6V IOL=20µA 0.10 0.10 V 2.3V IOL=2.3mA 0.31 0.33 IOL=3.1mA 0.44 0.45 3.0V IOL=2.7mA 0.31 0.33 IOL=4.0mA 0.44 0.45 IIN Input Leakage Current 0V to 3.6V 0 ≤ VIN ≤ 3.6 ±0.10 ±0.50 µA IOFF Power Off Leakage Current 0V 0 ≤ (VIN,VO) ≤ 3.6 0.10 0.50 µA ΔIOFF Additional Power Off Leakage Current 0V to 0.2V V IN or VO=0V to 3.6V 0.20 0.60 µA ICC Quiescent Supply Current 2.3V to 3.6V VIN=VCC or GND 0.50 0.90 µA VCC ≤ VIN ≤ 3.6V ±0.90 ΔICC Increase in ICC per Input 2.3V to 2.7V One Input at 0.3V or 1.1V, other Inputs at 0 or V CC µA 3.0V to 3.6V One Input at 0.45V or 1.2V, other Inputs at 0 or V CC

© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 74AUP1T97 • 1.0.3 7 74AUP1T97 — TinyLogic® Low Power Configurable Gate with Voltage-Level Translator Symbol Parameter V CC Conditions TA=+25°C T A=-40 to +85°C tPHL, tPLH Propagation Delay 2.30V ≤ VCC ≤ 2.70V, VIN=1.65V to 1.95V CL=5pF, RL=1MΩ ns Figure 10 Figure 11 2.30V ≤ VCC ≤ 2.70V, 2.30V ≤ VCC ≤ 2.70V, 3.00V ≤ VCC ≤ 3.60V, 3.00V ≤ VCC ≤ 3.60V, 3.00V ≤ VCC ≤ 3.60V, 2.30V ≤ VCC ≤ 2.70V, VIN=1.65V to 1.95V CL=10pF, RL=1MΩ 2.30V ≤ VCC ≤ 2.70V, 2.30V ≤ VCC ≤ 2.70V, 3.00V ≤ VCC ≤ 3.60V, 3.00V ≤ VCC ≤ 3.60V, 3.00V ≤ VCC ≤ 3.60V, 2.30V ≤ VCC ≤ 2.70V, VIN=1.65V to 1.95V CL=15pF, RL=1MΩ 2.30V ≤ VCC ≤ 2.70V, 2.30V ≤ VCC ≤ 2.70V, 3.00V ≤ VCC ≤ 3.60V, 3.00V ≤ VCC ≤ 3.60V, 3.00V ≤ VCC ≤ 3.60V, 2.30V ≤ VCC ≤ 2.70V, VIN=1.65V to 1.95V CL=30pF, RL=1MΩ 2.30V ≤ VCC ≤ 2.70V, 2.30V ≤ VCC ≤ 2.70V, 3.00V ≤ VCC ≤ 3.60V, 3.00V ≤ VCC ≤ 3.60V, 3.00V ≤ VCC ≤ 3.60V, CIN Input Capacitance 0 2.1 pF COUT Output Capacitance 0 3.0 pF CPD Power Dissipation Capacitance 2.30V ≤ V CC ≤ 2.70V 2.0 pF 3.00V ≤ VCC ≤ 3.60V 2.7

  1. DIMENSIONS ARE IN MILLIMETERS
  2. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD
  3. FILENAME AND REVISION: MAC06AREV4
  4. DRAWING CONFORMS TO ASME Y14.5M-1994

0.075 X 45

0.10 CBA

  1. PIN ONE IDENTIFIER IS 2X LENGTH OF ANY

OTHER LINE IN THE MARK CODE LAYOUT. Figure 12. 6-Lead, MicroPak™, 1.0mm Wide the warranty therein, which covers Fairchild products.

B. DIMENSIONS ARE IN MILLIMETERS. Figure 13. 6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch the warranty therein, which covers Fairchild products.

© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com 74AUP1T97 • 1.0.3 11 74AUP1T97 — TinyLogic® Low Power Configurable Gate with Voltage-Level Translator