74AUP1T97 - TinyLogic® Low Power Configurable Gate with Voltage-Level Translator
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 10
Technical content
Features
- Single Supply V oltage Translator ♦ 1.8 V to 3.3 V Input at VCC = 3.3 V ♦ 1.8 V to 2.5 V Input at VCC = 2.5 V
- 2.3 V to 3.6 V VCC Supply V oltage Operation
- 3.6 V Over−V oltage Tolerant I/O/C0039s at VCC from 2.3 V to 3.6 V
- Power−Off High−Impedance Inputs and Outputs
- Low Static Power Consumption ♦ ICC = 0.9 /C0109A Maximum
- Low Dynamic Power Consumption ♦ CPD = 2.7 pF Typical at 3.3 V
- Ultra−Small MicroPak™ Packages Logic Diagram
Figure 1. Logic Diagram (Positive Logic)
ORDERING INFORMATION
74AUP1T97FHX UDFN−6 (Pb-Free/Halide Free) 5000 / Tape & Reel 74AUP1T97L6X SIP−6 (Pb-Free/Halide Free) 5000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D
Table 1. PIN DESCRIPTIONS
1 B Data Input
2 GND Ground
3 A Data Input
4 Y Output
5 VCC Supply Voltage
6 C Data Input
Figure 2. MicroPak/C0069 (Top View) Table 2. FUNCTION TABLE Table 3. FUNCTION SELECTION TABLE
should not be assumed, damage may occur and reliability may be affected. O absolute maximum rating must be observed. Table 4. RECOMMENDED OPERATING CONDITIONS (Note 4) the Recommended Operating Ranges limits may affect device reliability.
- Unused inputs must be held HIGH or LOW. They may not float.
Table 5. DC ELECTRICAL CHARACTERISTICS performance may not be indicated by the Electrical Characteristics if operated under different conditions.
Table 6. AC ELECTRICAL CHARACTERISTICS
SIP6 1.45X1.0 CASE 127EB ISSUE O DATE 31 AUG 2016 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. 98AON13590GDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1SIP6 1.45X1.0 © Semiconductor Components Industries, LLC, 2016 www.onsemi.com
UDFN6 1.0X1.0, 0.35P CASE 517DP ISSUE O DATE 31 AUG 2016 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. 98AON13593GDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1UDFN6 1.0X1.0, 0.35P © Semiconductor Components Industries, LLC, 2016 www.onsemi.com
onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales