74AUP1G126 DIODES
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 13
Technical content
Features
- Advanced Ultra Low Power (AUP) CMOS
- Supply Voltage Range from 0.8V to 3.6V
- ±4mA Output Drive at 3.0V
- Low Static power consumption I CC < 0.9µA
- Low Dynamic Power Consumption C PD = 6.3pF (Typical at 3.6V)
- Schmitt Trigger Action at All Input s Make the Circuit Tolerant for Slower Input Rise and Fall Time. The hysteresis is typically 250mV at VCC = 3.0V
- I OFF Supports Partial-Power-Down Mode Operation
- ESD Protection Exceeds JESD 22 2000-V Human Body Model (A114-A) Exceeds 1000-V Charged Device Model (C101C)
- Latch-Up Exceeds 100mA per JESD 78, Class II
- Range of Package Options SOT353, DFN1410, and DFN1010
- Leadless packages per JESD30E DFN1010 denoted as X2-DFN1010-6 DFN1014 denoted as X2-DFN1014-6
- Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
- Halogen and Antimony Free. “Green” Device (Note 3) Pin Assignments (Top View) DFN1410 OE A GND Vcc Y NC (Top View) DFN1010 OE A GND Vcc Y NC OE GND Y Vcc5 A SOT353 (Top View)
Applications
- Suited for battery and low power needs
- Wide array of products such as: Tablets, E-readers Cell Phones, Personal Navigation / GPS MP3 players ,Cameras, Video Recorders PCs ultrabooks, notebooks, netbooks, Computer peripherals, hard drives, CD/DVD ROM TV, DVD, DVR, set top box Notes: 1. No purposely added lead. Fully EU Directiv e 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com for more in formation about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. Click here for ordering information, located at the end of datasheet
Document number: DS35158 Rev. 1 - 2 2 of 13 www.diodes.com August 2012 © Diodes Incorporated 74AUP1G126 Pin Descriptions Pin Name Function OE Output Enable A Data Input GND Ground Y Data Output VCC Supply Voltage Logic Diagram Function Table Inputs Output OE A Y H H H H L L L X Z 2 4 A OE Y
Document number: DS35158 Rev. 1 - 2 3 of 13 www.diodes.com August 2012 © Diodes Incorporated 74AUP1G126 Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.) Symbol Description Rating Unit ESD HBM Human Body Model ESD Protection 2 KV ESD CDM Charged Device Model ESD Protection 1 KV VCC Supply Voltage Range -0.5 to +4.6 V VI Input Voltage Range -0.5 to +4.6 V Vo Voltage applied to output in high or low state -0.5 to VCC +0.5 V IIK Input Clamp Current V I < 0 50 mA IOK Output Clamp Current (V O < 0 ) 50 mA IO Continuous Output current (V O = 0 to VCC) ±20 mA ICC Continuous Current Through V CC 50 mA IGND Continuous Current Through GND -50 mA TJ Operating Junction Temperature -40 to +150 °C TSTG Storage Temperature -65 to +150 °C Note: 4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. Recommended Operating Conditions (Note 5) (@TA = +25°C, unless otherwise specified.) Symbol Parameter Min Max Unit VCC Operating Voltage 0.8 3.6 V VI Input Voltage 0 3.6 V VO Output Voltage 0 VCC V IOH High-Level Output Current VCC = 0.8V -20 µA VCC = 1.1V -1.1 mA VCC = 1.4V -1.7 VCC = 1.65V -1.9 VCC = 2.3V -3.1 VCC = 3.0V -4 IOL Low-Level Output Current VCC = 0.8V 20 µA VCC = 1.1V 1.1 mA VCC = 1.4V 1.7 VCC = 1.65V 1.9 VCC = 2.3V 3.1 VCC = 3.0V 4 Δt/ΔV Input Transition Rise or Fall Rate VCC = 0.8V to 3.6V 200 ns/V TA Operating Free-Air Temperature -40 +125 °C Note: 5. Unused inputs should be held at VCC or Ground.
Document number: DS35158 Rev. 1 - 2 4 of 13 www.diodes.com August 2012 © Diodes Incorporated 74AUP1G126 Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Symbol Parameter Test Conditions V CC TA = +25°C T A = -40°C to +85°C Unit Min Max Min Max VIH High-Level Input Voltage 0.8V to 1.65V 0.80 X VCC 0.80 X VCC V 1.65V to 1.95V 0.65 X VCC 0.65 X VCC 2.3V to 2.7V 1.6 1.6 3.0V to 3.6V 2.0 2.0 VIL Low-Level Input Voltage 0.8V to 1.65V 0.30 X V CC 0.30 X VCC V 1.65V to 1.95V 0.35 X VCC 0.35 X VCC 2.3V to 2.7V 0.7 0.7 3.0V to 3.6V 0.9 0.9 VOH High-Level Output Voltage I OH = -20μA 0.8V to 3.6V VCC – 0.1 VCC – 0.1 V IOH = -1.1mA 1.1V 0.75 X VCC 0.7 X VCC IOH = -1.7mA 1.4V 1.11 1.03 IOH = -1.9mA 1.65V 1.32 1.3 IOH = -2.3mA 2.3V 2.05 1.97 IOH = -3.1mA 1.9 1.85 IOH = -2.7mA 3V 2.72 2.67 IOH = -4mA 2.6 2.55 VOL High-Level Input Voltage I OL = 20μA 0.8V to 3.6V 0.1 0.1 V IOL = 1.1mA 1.1V 0.3 X VCC 0.3 X VCC IOL = 1.7mA 1.4V 0.31 0.37 IOL = 1.9mA 1.65V 0.31 0.35 IOL = 2.3mA 2.3V 0.31 0.33 IOL = 3.1mA 0.44 0.45 IOL = 2.7mA 3V 0.31 0.33 IOL = 4mA 0.44 0.45 II Input Current A or B Input VI = GND to 3.6V 0 to 3.6V ±0.1 ±0.5 μA IOFF Power Down Leakage Current V I or VO = 0V to 3.6V 0 ±0.2 ±0.5 μA IOZ Z State Leakage Current V O = 3.6V ΔIOFF Delta Power Down Leakage Current V I or VO = 0V to 3.6V 0 to 0.2V 0.2 0.6 μA ICC Supply Current VI = GND or VCC, IO = 0 0.8V to 3.6V 0.5 0.9 μA ΔICC Additional Supply Current Data input at V CC -0.6V OE = GND IO = 0A 3.3V 40 50 μA OE input at VCC -0.6V Data Input = GND or Vcc, IO = 0A 3.3V 110 120 μA OE input at GND Data Input = GND to 3.6V, IO = 0A 0.8V to 3.6V 1 1 μA
Document number: DS35158 Rev. 1 - 2 5 of 13 www.diodes.com August 2012 © Diodes Incorporated 74AUP1G126 Electrical Characteristics (Note 4) (@TA = +25°C, unless otherwise specified.) Symbol Parameter Test Conditions V CC TA = -40°C to +125°C Unit Min Max VIH High-Level Input Voltage 0.8V to 1.65V 0.80 X VCC V 1.65V to 1.95V 0.70 X VCC 2.3V to 2.7V 1.6 3.0V to 3.6V 2.0 VIL Low-Level nput Voltage 0.8V to 1.65V 0.25X V CC V 1.65V to 1.95V 0.35 X VCC 2.3V to 2.7V 0.7 3.0V to 3.6V 0.9 VOH High-Level Output Voltage I OH = -20μA 0.8V to 3.6V VCC – 0.11 V IOH = -1.1mA 1.1V 0.6 X VCC IOH = -1.7mA 1.4V 0.93 IOH = -1.9mA 1.65V 1.17 IOH = -2.3mA 2.3V 1.77 IOH = -3.1mA 1.67 IOH = -2.7mA 3V 2.40 IOH = -4mA 2.30 VOL High-Level Input Voltage I OL = 20μA 0.8V to 3.6V 0.11 V IOL = 1.1mA 1.1V 0.3 X VCC IOL = 1.7mA 1.4V 0.41 IOL = 1.9mA 1.65V 0.39 IOL = 2.3mA 2.3V 0.36 IOL = 3.1mA 0.50 IOL = 2.7mA 3V 0.36 IOL = 4mA 0.50 II Input Current A or B Input VI = GND to 3.6V 0 to 3.6V ±0.75 μA IOFF Power Down Leakage Current V I or VO = 0V to 3.6V 0 ±3.5 μA IOZ Z State Leakage Current V O = 3.6V Vi = 3.6V 3.6V ±1.5 μA ΔIOFF Delta Power Down Leakage Current V I or VO = 0V to 3.6V 0V to 0.2V ±2.5 μA ICC Supply Current VI = GND or VCC, IO = 0 0.8V to 3.6V 3.0 μA ΔICC Additional Supply Current Data input at V CC -0.6V OE = GND IO = 0A 3.3V 75 μA OE input at VCC -0.6V Data Input = GND or Vcc, IO = 0A 3.3V 180 μA OE input at GND Data Input = GND to 3.6V, IO = 0A 0.8V to 3.6V 1 μA
Document number: DS35158 Rev. 1 - 2 6 of 13 www.diodes.com August 2012 © Diodes Incorporated 74AUP1G126 Switching Characteristics C L=5pF see Figure 1 Parameter From Input TO OUTPUT VCC TA = +25°C T A = -40°C to +85°C T A = -40°C to +125°C Unit Min Typ Max Min Max Min Max tpd A Y 0.8V 20.6 ns ten OE Y 0.8V 71.6 ns tdis OE Y 0.8V 10.3 ns CL=10pF see Figure 1 Parameter From Input TO OUTPUT VCC TA = +25°C T A = -40°C to +85°C T A = -40°C to +125°C Unit Min Typ Max Min Max Min Max tpd A Y 0.8V 24.0 ns ten OE Y 0.8V 75.3 ns tdis OE Y 0.8V 12.2 ns
Document number: DS35158 Rev. 1 - 2 7 of 13 www.diodes.com August 2012 © Diodes Incorporated 74AUP1G126 Switching Characteristics (cont.) C L=15pF see Figure 1 Parameter From Input TO OUTPUT VCC TA = +25°C T A = -40°C to +85°C T A = -40°C to +125°C Unit Min Typ Max Min Max Min Max tpd A Y 0.8V 27.4 ns ten OE Y 0.8V 79.2 ns tdis OE Y 0.8V 14.9 ns CL=30pF see Figure 1 Parameter From Input TO OUTPUT VCC TA = +25°C T A = -40°C to +85°C T A = -40°C to +125°C Unit Min Typ Max Min Max Min Max tpd A Y 0.8V 37.4 ns ten OE Y 0.8V 90.6 ns tdis OE Y 0.8V 51.6 ns
Document number: DS35158 Rev. 1 - 2 8 of 13 www.diodes.com August 2012 © Diodes Incorporated 74AUP1G126 Operating and Package Characteristics (@TA = +25°C, unless otherwise specified.) Parameter Test Conditions V CC Typ Unit Cpd Power Dissipation Capacitance f = 1MHz No Load 0.8V 6.9 pF 1.2V ± 0.1V 6.7 1.5V ± 0.1V 6.6 1.8V ± 0.15V 6.5 2.5V ± 0.2V 6.4 3.3V ± 0.3V 6.3 Ci Input Capacitance Vi = VCC or GND 0 or 3.3V 1.5 pF θJA Thermal Resistance Junction-to-Ambient SOT353 (Note 6) 371 °C/W X2-DFN1410-6 430 X2-DFN1010-6 445 θJC Thermal Resistance Junction-to-Case SOT353 (Note 6 143 °C/W X2-DFN1410-6 190 X2-DFN1010-6 250 Notes: 6. Test condition for SOT 353, DFN1410, and DFN1010 devices mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.
Figure 1. Load Circuit and Voltage Waveforms Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 10 MHz. C. Inputs are measured separatel y one transition per measurement. PLZ and tPHZ are the same as tdis. E. t PZL and tPZH are the same as tEN. F. t PLH and tPHL are the same as tPD.
Document number: DS35158 Rev. 1 - 2 10 of 13 www.diodes.com August 2012 © Diodes Incorporated 74AUP1G126
Ordering Information
Device Package Code Packaging 7” Tape and Reel Quantity Part Number Suffix 74AUP1G126SE-7 SE SOT353 3000/Tape & Reel -7 74AUP1G126FZ4-7 FZ4 X2-DFN1410-6 5000/Tape & Reel -7 74AUP1G126FW4-7 FW4 X2-DFN1010-6 5000/Tape & Reel -7 Marking Information (1) SOT353 1 2 3 XX Y W X XX : Identification code W : Week : A~Z : 1~26 week; X : A~Z : Internal code (Top View) Y : Year 0~9 a~z : 27~52 week; z represents 52 and 53 week Part Number Package Identification Code 74AUP1G126SE SOT353 XZ (2) X2-DFN1410-6 and X2-DFN1010-6 Y : Year : 0~9 (Top View) X : A~Z : Internal code Y W X XX XX : Identification Code W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week Part Number Package Identification Code 74AUP1G126FZ4 X2-DFN1410-6 XZ 74AUP1G126FW4 X2-DFN1010-6 XZ
Document number: DS35158 Rev. 1 - 2 11 of 13 www.diodes.com August 2012 © Diodes Incorporated 74AUP1G126 Package Outline Dimensions (All dimensions in mm.) Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. (1) SOT353 (2) X2-DFN1410-6 SOT353 Dim Min Max Typ A 0.10 0.30 0.25 B 1.15 1.35 1.30 C 2.00 2.20 2.10 D 0.65 Typ F 0.40 0.45 0.425 H 1.80 2.20 2.15 J 0 0.10 0.05 K 0.90 1.00 1.00 L 0.25 0.40 0.30 M 0.10 0.22 0.11 α 0° 8° - All Dimensions in mm X2-DFN1410-6 Dim Min Max Typ A –– 0.40 0.39 A1 0.00 0.05 0.02 A3 –– –– 0.13 b 0.15 0.25 0.20 D 1.35 1.45 1.40 E 0.95 1.05 1.00 e –– –– 0.50 L 0.25 0.35 0.30 Z –– –– 0.10 Z1 0.045 0.105 0.075 All Dimensions in mm A M J LD B C H K F D E e L(6x) A (Pin #1 ID) Seating Plane Z(4x) b(6x) Z1(4x)
Document number: DS35158 Rev. 1 - 2 12 of 13 www.diodes.com August 2012 © Diodes Incorporated 74AUP1G126 Package Outline Dimensions (cont.) (All dimensions in mm.) Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. (3) X2-DFN1010-6 Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version (1) SOT353 (2) X2-DFN1410-6 X2-DFN1010-6 Dim Min Max Typ A –– 0.40 0.39 A1 0.00 0.05 0.02 A3 –– –– 0.13 b 0.14 0.20 0.17 b1 0.05 0.15 0.10 D 0.95 1.05 1.00 E 0.95 1.05 1.00 e –– –– 0.35 L 0.35 0.45 0.40 K 0.15 –– –– Z –– –– 0.065 All Dimensions in mm Dimensions Value (in mm) Z 2.5 G 1.3 X 0.42 Y 0.6 C1 1.9 C2 0.65 Dimensions Value (in mm) C 0.500 G 0.250 X 0.250 X1 1.250 Y 0.525 Y1 1.250 A A1 D E Z(4x) b(6x) e L(6x) K (Pin #1 ID) X Z Y C2C2 G Y(6x) X(6x)G(4x) C
Document number: DS35158 Rev. 1 - 2 13 of 13 www.diodes.com August 2012 © Diodes Incorporated 74AUP1G126 Suggested Pad Layout (cont.) Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. (3) X2-DFN1010-6 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability ari sing out of the application or use of this document or any product described he rein; neither does Diodes Incorp orated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold Diodes In corporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. Should Customers purchase or use Diodes Inco rporated products for any unintended or unauthorized application, Customers shall i ndemnify and hold Diodes Incorporated and its representatives harmless agai nst all claims, damages, expenses , and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with inst ructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support devi ce or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-re lated requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems- related information or support that may be provided by Diodes Inco rporated. Further, Customers must fully indemnify Diodes Inc orporated and its representatives against any damages aris ing out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2012, Diodes Incorporated www.diodes.com Dimensions Value (in mm) C 0.350 G 0.150 X 0.200 X1 0.900 Y 0.550 Y1 1.250 X(6x) Y (6x) G(4x) C