74AUP1G0832 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 19

Technical content

  1. General description The 74AUP1G0832 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt-trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This device is fully specified for partial Power-down applications using IOFF . The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. The 74AUP1G0832 provides the Boolean function: Y = (A× B) + C. The user can choose the logic functions OR, AND and AND-OR. All inputs can be connected to VCC or GND. 2. Features ■ Wide supply voltage range from 0.8 V to 3.6 V ■ High noise immunity ■ Complies with JEDEC standards: ◆ JESD8-12 (0.8 V to 1.3 V) ◆ JESD8-11 (0.9 V to 1.65 V) ◆ JESD8-7 (1.2 V to 1.95 V) ◆ JESD8-5 (1.8 V to 2.7 V) ◆ JESD8-B (2.7 V to 3.6 V) ■ ESD protection: ◆ HBM JESD22-A114-C Class 3A. Exceeds 5000 V ◆ MM JESD22-A115-A exceeds 200 V ◆ CDM JESD22-C101-C exceeds 1000 V ■ Low static power consumption; ICC = 0.9µA (maximum) ■ Latch-up performance exceeds 100 mA per JESD 78 Class II ■ Inputs accept voltages up to 3.6 V ■ Low noise overshoot and undershoot < 10 % of VCC ■ IOFF circuitry provides partial Power-down mode operation ■ Multiple package options ■ Specified from−40 °Ct o+ 8 5°C and −40 °C to +125°C 74AUP1G0832 Low-power 3-input AND-OR gate Rev. 01.00 — 26 January 2006 Preliminary data sheet

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 2 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate 3. Quick reference data [1] C PD is used to determine the dynamic power dissipation (PD inµW). PD =C PD × VCC 2 × fi× N+ Σ(CL × VCC 2 × fo) where: fi= input frequency in MHz; fo = output frequency in MHz; C L = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; Σ(C L × VCC 2 × fo) = sum of the outputs. [2] The condition is VI= GND to VCC . 4. Ordering information Table 1: Quick reference data GND = 0 V; Tamb =2 5°C; tr =tf≤ 3n s . Symbol Parameter Conditions Min Typ Max Unit tPHL , tPLH HIGH-to-LOW and LOW-to-HIGH propagation delay A ,Bo rCt oY C L = 5 pF; RL =1M Ω ; VCC = 0.8 V - 19.5 - ns C L = 5 pF; RL =1M Ω ; VCC = 1.1 V to 1.3 V 2.5 5.6 11.1 ns C L = 5 pF; RL =1M Ω; VCC = 1.4 V to 1.6 V 1.9 3.9 6.4 ns C L = 5 pF; RL =1M Ω ; VCC = 1.65 V to 1.95 V 1.6 3.1 5.1 ns C L = 5 pF; RL =1M Ω ; VCC = 2.3 V to 2.7 V 1.4 2.4 3.7 ns C L = 5 pF; RL =1M Ω; VCC = 3.0 V to 3.6 V 1.3 2.2 3.2 ns C I input capacitance - 1.0 - pF C PD power dissipation capacitance VCC = 1.8 V; f = 1 MHz[1][2] - 3.3 - pF VCC = 3.3 V; f = 1 MHz[1][2] - 4.2 - pF Table 2: Ordering information Type number Package Temperature range Name Description Version 74AUP1G0832GW −40 °C to +125°C SC-88 plastic surface mounted package; 6 leads SOT363 74AUP1G0832GM −40 °C to +125°C XSON6 plastic extremely thin small outline package; no leads; 6 terminals; body 1× 1.45× 0.5 mm SOT886 74AUP1G0832GF −40 °C to +125°C XSON6 plastic extremely thin small outline package; no leads; 6 terminals; body 1× 1 × 0.5 mm SOT891

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 3 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate 5. Marking 6. Functional diagram 7. Pinning information

7.1 Pinning

Table 3: Marking Type number Marking code 74AUP1G0832GW aY 74AUP1G0832GM aY 74AUP1G0832GF aY Fig 1. Logic symbol 001aad943 A B C 4 Y Fig 2. Pin configuration SOT363 (SC-88) Fig 3. Pin configuration SOT886 (XSON6) Fig 4. Pin configuration SOT891 (XSON6) 74AUP1G0832 AC GND BY 001aad940 VCC5 74AUP1G0832 GND 001aad941 A B VCC C Y Transparent top view 74AUP1G0832 GND 001aad942 A B VCC C Y Transparent top view

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 4 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate

7.2 Pin description

  1. Functional description

8.1 Function table

[1] H = HIGH voltage level; L = LOW voltage level.

8.2 Logic configurations

Table 4: Pin description Symbol Pin Description A 1 data input A GND 2 ground (0 V) B 3 data input B Y 4 data output Y V CC 5 supply voltage C 6 data input C Table 5: Function table[1] Input Output C B A Y LLLL LLH L LH LL L HHH H LLH HL HH HHL H HHHH Table 6: Function selection table Logic function Figure 2-input AND see Figure5 2-input OR see Figure6 and7 3-input gate with the Boolean function: Y=( A × B) + C see Figure8

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 5 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate 9. Limiting values [1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For SC-88 packages: above 87.5°C the value of Ptotderates linearly with 4.0 mW/K. For XSON6 packages: above 45°C the value of Ptotderates linearly with 2.4 mW/K. Fig 5. 2-input AND gate Fig 6. 2-input OR gate Fig 7. 2-input OR gate Fig 8. 3-input gate with the Boolean function: Y = (A× B) + C 001aad944 VCC B A AB Y 001aad945 Y C B B C VCC 001aad946 Y CAA C VCC 001aad947 CA B VCCA B C Y Table 7: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Max Unit VCC supply voltage −0.5 +4.6 V IIK input clamping current VI<0V - −50 mA VI input voltage [1] −0.5 +4.6 V IOK output clamping current VO <0V - −50 mA VO output voltage active mode and Power-down mode [1] −0.5 +4.6 V IO output current V O =0 Vt oVCC - ±20 mA ICC quiescent supply current - +50 mA IGND ground current - −50 mA Tstg storage temperature −65 +150 °C Ptot total power dissipation Tamb = −40 °C to +125°C [2] - 250 mW

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 6 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate 10. Recommended operating conditions 11. Static characteristics Table 8: Recommended operating conditions Symbol Parameter Conditions Min Max Unit VCC supply voltage 0.8 3.6 V VI input voltage 0 3.6 V VO output voltage active mode 0 V CC V Power-down mode; VCC = 0 V 0 3.6 V Tamb ambient temperature −40 +125 °C Δt/ΔV input transition rise and fall rate VCC = 0.8 V to 3.6 V 0 200 ns/V Table 9: Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit Tamb = 25°C VIH HIGH-state input voltage VCC = 0.8 V 0.70 × VCC -- V VCC = 0.9 V to 1.95 V 0.65 × VCC -- V VCC = 2.3 V to 2.7 V 1.6 - - V VCC = 3.0 V to 3.6 V 2.0 - - V VIL LOW-state input voltage VCC = 0.8 V - - 0.30 × VCC V VCC = 0.9 V to 1.95 V - - 0.35 × VCC V VCC = 2.3 V to 2.7 V - - 0.7 V VCC = 3.0 V to 3.6 V - - 0.9 V VOH HIGH-state output voltage VI = VIH or VIL IO =−20 µA; VCC = 0.8 V to 3.6 V V CC − 0.1 - - V IO =−1.1 mA; VCC = 1.1 V 0.75 × VCC -- V IO =−1.7 mA; VCC = 1.4 V 1.11 - - V IO =−1.9 mA; VCC = 1.65 V 1.32 - - V IO =−2.3 mA; VCC = 2.3 V 2.05 - - V IO =−3.1 mA; VCC = 2.3 V 1.9 - - V IO =−2.7 mA; VCC = 3.0 V 2.72 - - V IO =−4.0 mA; VCC = 3.0 V 2.6 - - V

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 7 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate VOL LOW-state output voltage VI = VIH or VIL IO = 20µA; VCC = 0.8 V to 3.6 V - - 0.1 V IO = 1.1 mA; VCC = 1.1 V - - 0.3 × VCC V IO = 1.7 mA; VCC = 1.4 V - - 0.31 V IO = 1.9 mA; VCC = 1.65 V - - 0.31 V IO = 2.3 mA; VCC = 2.3 V - - 0.31 V IO = 3.1 mA; VCC = 2.3 V - - 0.44 V IO = 2.7 mA; VCC = 3.0 V - - 0.31 V IO = 4.0 mA; VCC = 3.0 V - - 0.44 V II input leakage current V I= GND to 3.6 V; VCC = 0 V to 3.6 V - - ±0.1 µA IOFF power-off leakage current VI or VO = 0 V to 3.6 V; VCC = 0 V - - ±0.2 µA ΔIOFF additional power-off leakage current VI or VO = 0 V to 3.6 V; VCC = 0 V to 0.2 V -- ±0.2 µA ICC quiescent supply current VI = GND or VCC ; IO = 0 A; VCC = 0.8 V to 3.6 V - - 0.5 µA ΔICC additional quiescent supply current VI = VCC − 0.6 V; IO = 0 A; VCC = 3.3 V [1] -- 4 0 µA C I input capacitance V CC = 0 V to 3.6 V; VI = GND or VCC - 1.0 - pF C O output capacitance V O = GND; VCC = 0 V - 1.8 - pF Tamb =−40 °C to +85°C VIH HIGH-state input voltage VCC = 0.8 V 0.70 × VCC -- V VCC = 0.9 V to 1.95 V 0.65 × VCC -- V VCC = 2.3 V to 2.7 V 1.6 - - V VCC = 3.0 V to 3.6 V 2.0 - - V VIL LOW-state input voltage VCC = 0.8 V - - 0.30 × VCC V VCC = 0.9 V to 1.95 V - - 0.35 × VCC V VCC = 2.3 V to 2.7 V - - 0.7 V VCC = 3.0 V to 3.6 V - - 0.9 V VOH HIGH-state output voltage VI = VIH or VIL IO =−20 µA; VCC = 0.8 V to 3.6 V V CC − 0.1 - - V IO =−1.1 mA; VCC = 1.1 V 0.7 × VCC -- V IO =−1.7 mA; VCC = 1.4 V 1.03 - - V IO =−1.9 mA; VCC = 1.65 V 1.30 - - V IO =−2.3 mA; VCC = 2.3 V 1.97 - - V IO =−3.1 mA; VCC = 2.3 V 1.85 - - V IO =−2.7 mA; VCC = 3.0 V 2.67 - - V IO =−4.0 mA; VCC = 3.0 V 2.55 - - V Table 9: Static characteristics …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 8 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate VOL LOW-state output voltage VI = VIH or VIL IO = 20µA; VCC = 0.8 V to 3.6 V - - 0.1 V IO = 1.1 mA; VCC = 1.1 V - - 0.3 × VCC V IO = 1.7 mA; VCC = 1.4 V - - 0.37 V IO = 1.9 mA; VCC = 1.65 V - - 0.35 V IO = 2.3 mA; VCC = 2.3 V - - 0.33 V IO = 3.1 mA; VCC = 2.3 V - - 0.45 V IO = 2.7 mA; VCC = 3.0 V - - 0.33 V IO = 4.0 mA; VCC = 3.0 V - - 0.45 V II input leakage current V I= GND to 3.6 V; VCC = 0 V to 3.6 V - - ±0.5 µA IOFF power-off leakage current VI or VO = 0 V to 3.6 V; VCC = 0 V - - ±0.5 µA ΔIOFF additional power-off leakage current VI or VO = 0 V to 3.6 V; VCC = 0 V to 0.2 V -- ±0.6 µA ICC quiescent supply current VI = GND or VCC ; IO = 0 A; VCC = 0.8 V to 3.6 V - - 0.9 µA ΔICC additional quiescent supply current VI = VCC − 0.6 V; IO = 0 A; VCC = 3.3 V [1] -- 5 0 µA Tamb =−40 °C to +125°C VIH HIGH-state input voltage VCC = 0.8 V 0.75 × VCC -- V VCC = 0.9 V to 1.95 V 0.70 × VCC -- V VCC = 2.3 V to 2.7 V 1.6 - - V VCC = 3.0 V to 3.6 V 2.0 - - V VIL LOW-state input voltage VCC = 0.8 V - - 0.25 × VCC V VCC = 0.9 V to 1.95 V - - 0.30 × VCC V VCC = 2.3 V to 2.7 V - - 0.7 V VCC = 3.0 V to 3.6 V - - 0.9 V VOH HIGH-state output voltage VI = VIH or VIL IO =−20 µA; VCC = 0.8 V to 3.6 V V CC − 0.11 - - V IO =−1.1 mA; VCC = 1.1 V 0.6 × VCC -- V IO =−1.7 mA; VCC = 1.4 V 0.93 - - V IO =−1.9 mA; VCC = 1.65 V 1.17 - - V IO =−2.3 mA; VCC = 2.3 V 1.77 - - V IO =−3.1 mA; VCC = 2.3 V 1.67 - - V IO =−2.7 mA; VCC = 3.0 V 2.40 - - V IO =−4.0 mA; VCC = 3.0 V 2.30 - - V Table 9: Static characteristics …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 9 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate [1] One input at VCC − 0.6 V, other input at VCC or GND. 12. Dynamic characteristics VOL LOW-state output voltage VI = VIH or VIL IO = 20µA; VCC = 0.8 V to 3.6 V - - 0.11 V IO = 1.1 mA; VCC = 1.1 V - - 0.33 × VCC V IO = 1.7 mA; VCC = 1.4 V - - 0.41 V IO = 1.9 mA; VCC = 1.65 V - - 0.39 V IO = 2.3 mA; VCC = 2.3 V - - 0.36 V IO = 3.1 mA; VCC = 2.3 V - - 0.50 V IO = 2.7 mA; VCC = 3.0 V - - 0.36 V IO = 4.0 mA; VCC = 3.0 V - - 0.50 V II input leakage current V I= GND to 3.6 V; VCC = 0 V to 3.6 V - - ±0.75 µA IOFF power-off leakage current VI or VO = 0 V to 3.6 V; VCC = 0 V - - ±0.75 µA ΔIOFF additional power-off leakage current VI or VO = 0 V to 3.6 V; VCC = 0 V to 0.2 V -- ±0.75 µA ICC quiescent supply current VI = GND or VCC ; IO = 0 A; VCC = 0.8 V to 3.6 V - - 1.4 µA ΔICC additional quiescent supply current VI = VCC − 0.6 V; IO = 0 A; VCC = 3.3 V [1] -- 7 5 µA Table 9: Static characteristics …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit Table 10: Dynamic characteristics Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure10 Symbol Parameter Conditions Min Typ [1] Max Unit Tamb = 25°C; CL = 5 pF tPHL , tPLH HIGH-to-LOW and LOW-to-HIGH propagation delay A, B or C to Y see Figure9 VCC = 0.8 V - 19.5 - ns Tamb = 25°C; CL = 10 pF tPHL , tPLH HIGH-to-LOW and LOW-to-HIGH propagation delay A, B or C to Y see Figure9 VCC = 0.8 V - 23.1 - ns

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 10 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate [1] All typical values are measured at nominal VCC . [2] C PD is used to determine the dynamic power dissipation (PD inµW). PD =C PD × VCC 2 × fi× N+ Σ(CL × VCC 2 × fo) where: fi= input frequency in MHz; fo = output frequency in MHz; C L = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; Σ(C L × VCC 2 × fo) = sum of the outputs. [3] The condition is VI= GND to VCC . Tamb = 25°C; CL = 15 pF tPHL , tPLH HIGH-to-LOW and LOW-to-HIGH propagation delay A, B or C to Y see Figure9 VCC = 0.8 V - 26.6 - ns Tamb = 25°C; CL = 30 pF tPHL , tPLH HIGH-to-LOW and LOW-to-HIGH propagation delay A, B or C to Y see Figure9 VCC = 0.8 V - 34.8 - ns Tamb = 25°C C PD power dissipation capacitance f = 1 MHz [2][3] VCC = 0.8 V - 3.0 - pF VCC = 1.1 V to 1.3 V - 3.1 - pF VCC = 1.4 V to 1.6 V - 3.1 - pF VCC = 1.65 V to 1.95 V - 3.3 - pF VCC = 2.3 V to 2.7 V - 3.7 - pF VCC = 3.0 V to 3.6 V - 4.2 - pF Table 10: Dynamic characteristics …continued Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure10 Symbol Parameter Conditions Min Typ [1] Max Unit

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 11 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate Table 11: Dynamic characteristics Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure10 Symbol Parameter Conditions −40 °C to +85°C −40 °C to +125°C Unit Min Max Min Max C L = 5 pF tPHL , tPLH HIGH-to-LOW and LOW-to-HIGH propagation delay A, B or C to Y see Figure9 C L = 10 pF tPHL , tPLH HIGH-to-LOW and LOW-to-HIGH propagation delay A, B or C to Y see Figure9 C L = 15 pF tPHL , tPLH HIGH-to-LOW and LOW-to-HIGH propagation delay A, B or C to Y see Figure9 C L = 30 pF tPHL , tPLH HIGH-to-LOW and LOW-to-HIGH propagation delay A, B or C to Y see Figure9

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 12 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate 13. Waveforms Measurement points are given inTable12. VOL and VOH are typical output voltage drop that occur with the output load. Fig 9. Input A, B and C to output Y propagation delay times. Table 12: Measurement points Supply voltage Output Input VCC VM VM VI tr = tf Y output A, B, C input Y output GND VI VOH VOH VOL VOL VM VM VM VM VM VM tPLH tPLH tPHL tPHL 001aab593

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 13 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate [1] For measuring enable and disable times RL =5k Ω , for measuring propagation delays, setup and hold times and pulse width RL = 1 MΩ . Test data is given inTable13. Definitions for test circuit: R L = Load resistance C L = Load capacitance including jig and probe capacitance R T = Termination resistance should be equal to the output impedance Zo of the pulse generator VEXT = External voltage for measuring switching times. Fig 10. Load circuitry for switching times Table 13: Test data Supply voltage Load VEXT VCC C L R L [1] tPLH , tPHL tPZH , tPHZ tPZL , tPLZ 0.8 V to 3.6 V 5 pF , 10 pF , 15 pF and 30 pF 5 kΩ or 1 MΩ open GND 2 × VCC 001aac521 PULSE GENERATOR DUT R T VI VO VEXTVCC R L 5 kΩ C L

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 14 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate 14. Package outline Fig 11. Package outline SOT363 (SC-88) REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT363 SC-88 wB Mbp D e pin 1 index A Lp Q detail X H E E v M A AB y 0 1 2 mm scale c X 13 2 456 Plastic surface mounted package; 6 leads SOT363 UNIT A 1 max bp cD E e1 H E Lp Qy wv mm 0.1 0.30 0.20 2.2 1.8 0.25 0.10 1.35 1.15 0.65 e 1.3 2.2 2.0 0.2 0.10.2 DIMENSIONS (mm are the original dimensions) 0.45 0.15 0.25 0.15 A 1.1 0.8 97-02-28 04-11-08

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 15 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate Fig 12. Package outline SOT886 (XSON6) terminal 1 index area REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT886 MO-252 SOT886 04-07-15 04-07-22 DIMENSIONS (mm are the original dimensions) XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1.45 x 0.5 mm D E e A 1 b LL1 0 1 2 mm scale Notes 1. Including plating thickness. 2. Can be visible in some manufacturing processes. UNIT mm 0.25 0.17 1.5 1.4 0.35 0.27 A max b E 1.05 0.95 D ee 1 L 0.40 0.32 0.50.6 A (1) max 0.5 0.04 (2) (2) A

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 16 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate Fig 13. Package outline SOT891 (XSON6) terminal 1 index area REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT891 SOT891 05-03-11 05-04-06 XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1 x 0.5 mm D E e A 1 b LL1 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT mm 0.20 0.12 1.05 0.95 0.35 0.27 A 1 max b E 1.05 0.95 D ee 1 L 0.40 0.32 0.350.55 A max 0.5 0.04 A

74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 17 of 19 Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate 15. Abbreviations 16. Revision history Table 14: Abbreviations Acronym Description CDM Charged Device Model CMOS Complementary Metal Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model TTL Transistor Transistor Logic Table 15: Revision history Document ID Release date Data sheet status Change notice Doc. number Supersedes 74AUP1G0832_1 <tbd> Preliminary data sheet - - -

Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate 74AUP1G0832_1 © Koninklijke Philips Electronics N.V. 2006. All rights reserved. Preliminary data sheet Rev. 01.00 — 26 January 2006 18 of 19 17. Data sheet status [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 18. Definitions Short-form specification —The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 19. Disclaimers Life support —These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes —Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 20. Trademarks Notice —All referenced brands, product names, service names and trademarks are the property of their respective owners. 21. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com Level Data sheet status[1] Product status[2][3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).

© Koninklijke Philips Electronics N.V. 2006 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 26 January 2006 Document number: 74AUP1G0832_1 Published in The Netherlands Philips Semiconductors 74AUP1G0832 Low-power 3-input AND-OR gate 22. Contents