74ALVT162827_2_15 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 10
Technical content
/C0109 /C0110 /C0114 74ALVT162827 20-bit buffer/line driver, non-inverting, with 30Ω termination resistors (3-State) Product specification Supersedes data of 1997 May 01 IC23 Data Handbook
1998 Feb 13
Philips Semiconductors Product specification 74ALVT1628272.5V/3.3V 20-bit buffer/line driver, non-inverting, with 30Ω termination resistors (3-State)
21998 Feb 13 853-1843 18961
FEATURES
- Multiple VCC and GND pins minimize switching noise
- 5V I/O Compatible
- Live insertion/extraction permitted
- 3-State output buffers
- Outputs include series resistance of 30Ω making external termination resistors unnecessary
- Power-up 3-State
- Output capability: +12mA/–12mA
- Latch-up protection exceeds 500mA per Jedec Std 17
- ESD protection exceeds 2000 V per MIL STD 883 Method 3015 and 200 V per Machine Model
- Bus hold data inputs eliminate the need for external pull-up resistors to hold unused inputs
DESCRIPTION
The 74ALVT162827 high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. It is designed for VCC operation at 2.5V or 3.3V with I/O compatibility to 5V. The 74ALVT162827 20-bit buffers provide high performance bus interface buffering for wide data/address paths or buses carrying parity. They have NOR Output Enables (nOE1, nOE2) for maximum control flexibility. The 74ALVT162827 is designed with 30Ω series resistance in both the pull-up and pull-down output structures. This design reduces line noise in applications such as memory address drivers, clock drivers and bus receivers/transmitters. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS TYPICAL UNITSYMBOL PARAMETER Tamb = 25°C 2.5V 3.3V UNIT tPLH tPHL Propagation delay nAx to nBx or nBx to nAx C L = 50pF 2.7 2.3 2.2 2.0 ns C IN Input capacitance DIR, OE VI = 0V or VCC 3 3 pF C Out Output capacitance VI/O = 0V or VCC 9 9 pF ICCZ Total supply current Outputs disabled 40 70 µA
ORDERING INFORMATION
PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 56-Pin Plastic SSOP Type III –40°C to +85°C 74ALVT162827 DL AV162827 DL SOT371-1 56-Pin Plastic TSSOP Type II –40°C to +85°C 74ALVT162827 DGG AV162827 DGG SOT364-1 PIN DESCRIPTION PIN NUMBER SYMBOL FUNCTION 42, 41, 40, 38, 37, 36, 34, 33, 31, 30 1A0 - 1A9 2A0 - 2A9 Data inputs 15, 16, 17, 19, 20, 21, 23, 24, 26, 27 1Y0 - 1Y9 2Y0 - 2Y9 Data outputs 1, 56, 28, 29 1OE 0, 1OE1 2OE 0, 2OE1 Output enable inputs (active-Low) 4, 11, 18, 25, 32, 39, 46, 53 GND Ground (0V) 7, 22, 35, 50 VCC Positive supply voltage
Philips Semiconductors Product specification 74ALVT1628272.5V/3.3V 20-bit buffer/line driver, non-inverting, with 30Ω termination resistors (3-State)
1998 Feb 13 3
V CC 2A6 2A7 GND 2A8 2A9 2OE1 SH00010 LOGIC SYMBOL 1A0 1A1 1A2 1A3 1A4 1A5 1A6 1A7 1Y0 1Y1 1Y2 1Y3 1Y4 1Y5 1Y6 1Y7 1A8 1A9 1Y8 1Y9 2A0 2A1 2A2 2A3 2A4 2A5 2A6 2A7 2Y0 2Y1 2Y2 2Y3 2Y4 2Y5 2Y6 2Y7 2A8 2A9 2Y8 2Y9 55 54 52 51 49 48 47 45 44 43 2 3 5 6 8 9 10 12 13 14 42 41 40 38 37 36 34 33 31 30 15 16 17 19 20 21 23 24 26 27 SH00011 1OE0 1OE1 2OE0 2OE1 LOGIC SYMBOL (IEEE/IEC) EN1 1 ∇ EN2 2 ∇1 SH00012 FUNCTION TABLE INPUTS OUTPUTS OPERATING MODEnOE x nAx nYx OPERATING MODE L L L Transparent L H H Transparent H X Z High impedance X = Don’t care Z = High impedance “off” state H = High voltage level L = Low voltage level SCHEMATIC OF EACH OUTPUT VCC VCC OUTPUT SW00206 27Ω 27Ω
Philips Semiconductors Product specification 74ALVT1628272.5V/3.3V 20-bit buffer/line driver, non-inverting, with 30Ω termination resistors (3-State)
1998 Feb 13 4
ABSOLUTE MAXIMUM RATINGS 1, 2 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage -0.5 to +7.0 V IIK DC input diode current VI < 0 -18 mA VI DC input voltage3 -1.2 to +7.0 V IOK DC output diode current VO < 0 -50 mA VOUT DC output voltage3 output in Off or High state -0.5 to +5.5 V IOUT DC output current output in Low state 128 mA Tstg Storage temperature range -65 to 150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER 2.5V RANGE LIMITS 3.3V RANGE LIMITS UNITSYMBOL PARAMETER MIN MAX MIN MAX UNIT VCC DC supply voltage 2.3 2.7 3.0 3.6 V VI Input voltage 0 5.5 0 5.5 V VIH High-level input voltage 1.7 2.0 V VIL Input voltage 0.7 0.8 V IOH High-level output current –8 –12 mA IOL Low-level output current 12 12 mA Δt/Δv Input transition rise or fall rate; Outputs enabled 10 10 ns/V Tamb Operating free-air temperature range –40 +85 –40 +85 °C
Philips Semiconductors Product specification 74ALVT1628272.5V/3.3V 20-bit buffer/line driver, non-inverting, with 30Ω termination resistors (3-State)
1998 Feb 13 5
DC ELECTRICAL CHARACTERISTICS (3.3V 0.3V RANGE) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40°C to +85°C UNIT MIN TYP 1 MAX VIK Input clamp voltage VCC = 3.0V; IIK = –18mA –0.85 –1.2 V VOH High-level output voltage VCC = 3.0V; IOH = –12mA 2.0 2.3 V VOL Low–level output voltage VCC = 3.0V; IOL = 12mA 0.5 0.8 V VCC = 3.6V; VI = VCC or GND Control pins 0.1 ±1 VCC =0o r36 V;VI=55 V 01 10 II Input leakage current VCC = 0 or 3.6V; VI = 5.5V 0.1 10 µAII In ut leakage current VCC =36 V;VI=V CC 4 05 1 µA VCC = 3.6V; VI = VCC Data pins4 0.5 1 VCC = 3.6V; VI = 0 Data ins4 0.1 -5 IOFF Off current VCC = 0V; VI or VO = 0 to 4.5V 0.1 ±100 µA Bus Hold current VCC = 3V; VI = 0.8V 75 130 µA IHOLD Bus Hold current Data inputs6 VCC = 3V; VI = 2.0V –75 –140 µAData in uts VCC = 0V to 3.6V; VCC = 3.6V ±500 µA IEX Current into an output in the High state when VO > VCC VO = 5.5V; VCC = 3.0V 10 125 µA IPU/PD Power up/down 3-State output current3 VCC ≤ 1.2V; VO = 0.5V to VCC ; VI = GND or VCC OE/OE = Don’t care 1 ±100 µA IOZH 3-State output High currentVCC = 3.6V; VO = 3.0V; VI = VIL or VIH 0.5 5 µA IOZL 3-State output Low current VCC = 3.6V; VO = 0.5V; VI = VIL or VIH 0.5 –5 µA ICCH VCC = 3.6V; Outputs High, VI = GND or VCC, IO = 0 0.07 0.1 ICCL Quiescent supply current VCC = 3.6V; Outputs Low, VI = GND or VCC, IO = 0 3.9 5.5 mA ICCZ VCC = 3.6V; Outputs Disabled; VI = GND or VCC, IO = 05 0.07 0.1 ΔICC Additional supply current per input pin2 VCC = 3V to 3.6V; One input at VCC –0.6V, Other inputs at VCC or GND 0.04 0.4 mA NOTES: 1. All typical values are at VCC = 3.3V and Tamb = 25°C. 2. This is the increase in supply current for each input at the specified voltage level other than VCC or GND transition time of 100µsec is permitted. This parameter is valid for Tamb = 25°C only. 4. Unused pins at VCC or GND. 5. ICCZ is measured with outputs pulled up to VCC or pulled down to ground. 6. This is the bus hold overdrive current required to force the input to the opposite logic state. AC CHARACTERISTICS (3.3V 0.3V RANGE) GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = -40 to +85oC VCC = +3.3V ±0.3V UNIT MIN TYP MAX tPLH tPHL Propagation delay nAx to nYx 1 1.0 1.0 2.2 2.0 3.3 3.0 ns tPZH tPZL Output enable time to High and Low level 2 1.5 1.0 3.4 2.4 5.6 3.7 ns tPHZ tPLZ Output disable time from High and Low level 2 1.5 1.0 3.4 2.7 5.2 4.5 ns
Philips Semiconductors Product specification 74ALVT1628272.5V/3.3V 20-bit buffer/line driver, non-inverting, with 30Ω termination resistors (3-State)
1998 Feb 13 6
DC ELECTRICAL CHARACTERISTICS (2.5V 0.2V RANGE) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40°C to +85°C UNIT MIN TYP 1 MAX VIK Input clamp voltage VCC = 2.3V; IIK = –18mA –0.85 –1.2 V VOH High-level output voltage VCC = 2.3V; IOH = –8mA 1.7 2.3 V VOL Low-level output voltage VCC = 2.3V; IOL = 12mA 0.5 0.7 V VCC = 2.7V; VI = VCC or GND Control pins 0.1 ±1 VCC = 2.7V; VI = 0 Data ins4 0.1 -5 IOFF Off current VCC = 0V; VI or VO = 0 to 4.5V 0.1 100 µA IH O LD Bus Hold current VCC = 2.3V; VI = 0.7V 115 µAHOLD Data inputs6 VCC = 2.3V; VI = 1.7V –10 µA IEX Current into an output in the High state when VO > VCC VO = 5.5V; VCC = 2.3V 10 125 µA IPU/PD Power up/down 3-State output current3 VCC ≤ 1.2V; VO = 0.5V to VCC ; VI = GND or VCC ; OE/OE = Don’t care 1 100 µA IOZH 3-State output High currentVCC = 2.7V; VO = 2.3V; VI = VIL or VIH 0.5 5 µA IOZL 3-State output Low current VCC = 2.7V; VO = 0.5V; VI = VIL or VIH 0.5 –5 µA ICCH VCC = 2.7V; Outputs High, VI = GND or VCC, IO = 0 0.04 0.1 ICCL Quiescent supply current VCC = 2.7V; Outputs Low, VI = GND or VCC, IO = 0 3.5 5.0 mA ICCZ VCC = 2.7V; Outputs Disabled; VI = GND or VCC, IO = 05 0.04 0.1 ΔICC Additional supply current per input pin2 VCC = 2.3V to 2.7V; One input at VCC –0.6V, Other inputs at VCC or GND 0.04 0.4 mA NOTES: 1. All typical values are at VCC = 2.5V and Tamb = 25°C. 2. This is the increase in supply current for each input at the specified voltage level other than VCC or GND transition time of 100µsec is permitted. This parameter is valid for Tamb = 25°C only. 4. Unused pins at VCC or GND. 5. ICCZ is measured with outputs pulled up to VCC or pulled down to ground. 6. Not guaranteed. AC CHARACTERISTICS (2.5V 0.2V RANGE) GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = -40 to +85oC VCC = +2.5V ±0.2V UNIT MIN TYP MAX tPLH tPHL Propagation delay nAx to nYx 1 1.5 1.5 2.7 2.3 4.5 3.5 ns tPZH tPZL Output enable time to High and Low level 2 2.5 1.5 4.7 2.9 7.5 4.7 ns tPHZ tPLZ Output disable time from High and Low level 2 1.5 1.0 3.2 2.4 5.2 4.0 ns
Philips Semiconductors Product specification 74ALVT1628272.5V/3.3V 20-bit buffer/line driver, non-inverting, with 30Ω termination resistors (3-State)
1998 Feb 13 7
VM = 1.5V for VCC /C0119 3.0V; VM = VCC /2 for VCC /C0118 2.7V VX = VOL + 0.3V for VCC /C0119 3.0V; VX = VOL + 0.15V for VCC /C0118 2.7V VY = VOH – 0.3V for VCC /C0119 3.0V; VY = VOH – 0.15V for VCC /C0118 2.7V nAx INPUT VM VMnYx OUTPUT VM VM tPLH tPHL SA00016 3.0V or VCC whichever is less VOH VOL Waveform 1. Input (nAx) to Output (nYx) Propagation Delays nOE x INPUT V M VM tPZH tPHZ nYx OUTPUT VOH VM VM nYx OUTPUT V OL tPZL tPLZ VX VY SW00174 3.0V or VCC whichever is less 3.0V or VCC Waveform 2. 3-State Output Enable and Disable Times TEST CIRCUIT AND WAVEFORM PULSE GENERATOR VIN VOUT C L VCC R L Test Circuit for 3-State Outputs VM VM tW NEGATIVE PULSE 10% 10% 90% 90% VM VM tW POSITIVE PULSE 90% 90% 10% 10% tTHL (tF) tTLH (tR )t THL (tF) tTLH (tR ) VM = 1.5V or VCC /2 whichever is less Input Pulse Definition DEFINITIONS R L = Load resistor; see AC CHARACTERISTICS for value. C L = Load capacitance includes jig and probe capacitance: See AC CHARACTERISTICS for value. R T = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS FAMILY 74ALVT16 SWITCH POSITION TEST SWITCH tPLZ/tPZL 6V or VCC x 2 tPLH/tPHL Open tPHZ /tPZH GND 6.0V or VCC x 2 R T R L Open GND SW00025 D.U.T. Amplitude Rep. Rate t W tR tF 3.0V or VCC whichever is less /C011810MHz 500ns /C01182.5ns /C01182.5ns VIN VIN
Philips Semiconductors Product specification 74ALVT16282720-bit buffer/line driver, non-inverting, with 30Ω termination resistors (3-State)
1998 Feb 13 8
SSOP56: plastic shrink small outline package; 56 leads; body width 7.5 mm SOT371-1
Philips Semiconductors Product specification 74ALVT16282720-bit buffer/line driver, non-inverting, with 30Ω termination resistors (3-State)
1998 Feb 13 9
TSSOP56: plastic thin shrink small outline package; 56 leads; body width 6.1mm SOT364-1
Philips Semiconductors Product specification 74ALVT16282720-bit buffer/line driver, non-inverting, with 30Ω termination resistors (3-State) yyyy mmm dd 10 Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 05-96 Document order number: 9397-750-03651 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.