74ALVT16260 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 14
Technical content
/C0109 /C0110 /C0114 74ALVT16260 12-bit to 24-bit multiplexed D-type latches (3-State) Product specification IC23 Data Handbook
1998 Jan 30
Philips Semiconductors Product specification 74ALVT162602.5V/3.3V 12-bit to 24-bit multiplexed D-type latches (3-State)
21998 Jan 30 853-2046-18918
FEATURES
- ESD protection exceeds 2000V per Mil-Std-883C, Method 3015; exceeds 200V using machine model
- Latch-up protection exceeds 500mA per JEDEC Standard JESD-17.
- Distributed VCC and GND pin configuration minimizes high-speed switching noise.
- Output capability (–32mA IOH , 64mA IOL ).
- Bus hold inputs eliminate the need for external pull-up resistors.
- 5V I/O compatible
- Live insertion/extraction permitted
- Power-up 3-State
- Power-up Reset
DESCRIPTION
The 74ALVT16260 is a 12-bit to 24-bit multiplexed D-type latch used in applications where two separate data paths must be multiplexed onto, or demultiplexed from, a single data path. Typical applications include multiplexing and/or demultiplexing of address and data information in microprocessor or bus-interface applications. This device is alto useful in memory-interleaving applications. Three 12-bit I/O ports (A1–A12, 1B1–1B12, and 2B1–2B12) are available for address and/or data transfer. The output enable (OE1B OE2B , and OEA) inputs control the bus transceiver functions. The OE1B and OE2B control signals also allow bank control in the A to B direction. Address and/or data information can be stored using the internal storage latches. The latch enable (LE1B, LE2B, LEA1B, and LEA2B) inputs are used to control data storage. When the latch enable input is high, the latch is transparent. When the latch enable input goes low, the data present at the inputs is latched and remains latched until the latch enable input is returned high. To ensure the high-impedance state during power-up or power-down, OE should be tied to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current sinking capability of the driver. The 74ALVT16260 is available in a 56-pin Shrink Small Outline Package (SSOP) and 56-pin Thin Shrink Small Outline Package (TSSOP). QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS TYPICAL UNITSYMBOL PARAMETER Tamb = 25°C; GND = 0V 2.5V 3.3V UNIT tPLH Propagation delay C =5 0pF 3.5 2.8 ns tPHL nAx to nBx nBx to nAx C L = 50 pF 3.3 2.6 ns C IN Input capacitance VI = 0 V or VCC 4 4 pF C OUT Output capacitance VI/O = 0 V or 5.0 V 9 9 pF ICCZ Total supply current Outputs disabled 100 80 µA
ORDERING INFORMATION
PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 56-Pin Plastic SSOP Type III –40°C to +85°C 74ALVT16260 DL AV16260 DL SOT371-1 56-Pin Plastic TSSOP Type II –40°C to +85°C 74ALVT16260 DGG AV16260 DGG SOT364-1
Philips Semiconductors Product specification 74ALVT162602.5V/3.3V 12-bit to 24-bit multiplexed D-type latches (3-State)
1998 Jan 30 3
PIN NUMBER SYMBOL FUNCTION 8, 9, 10, 12, 13, 14, 15, 16, 17, 19, 20, 21 An Data inputs/outputs (A) 23, 24, 26, 31, 33, 34, 36, 37, 38, 40, 41, 42 1Bn Data inputs/outputs (B1) 6, 5, 3, 54, 52, 51, 49, 48, 47, 45, 44, 43 2Bn Data inputs/outputs (B2) 1, 29, 56 OEA , OE1B, OE2B Output enable input (active low) 2, 27, 30, 55 LE1B, LE2B, LEA1B, LEA2B Latch enable inputs
28 SEL B1/B2 input select input
4, 11, 18, 25, 32, 39, 46, 53 GND Ground (0V) 7, 22, 35, 50 VCC Positive supply voltage PIN CONFIGURATION 12 45 56OEA 2B3 GND 2B2 2B1 VCC GND OE2B LEA2B 2B4 GND 2B5 2B6 V CC 2B8 2B7 2B9 GND 2B10A4 18 39 44A5 2B11 1B12 2B12 1B11 1B10 GND 19 38 GND A10 25 32 37A11 A12 VCC 1B1 1B2 1B9 V CC 1B8 1B6 1B5 GNDGND 26 31 1B41B3 27 30 LEA1BLE2B 28 29SEL OE1B LE1B 1B7 SA00435 FUNCTION TABLES B to A (OEB = H) INPUTS OUTPUT 1B 2B SEL LE1B LE2B OEA A H X H H X L H L X H H X L L X X H L X L A0 X H L X H L H X L L X H L L X X L X L L A0 X X X X X H Z A to B (OEA = H) INPUTS OUTPUT A LEA1B LEA2B OE1B OE2B 1B 2B H H H L L H H L H H L L L L H H L L L H 2B0 L H L L L L 2B0 H L H L L 1B0 H L L H L L 1B0 L X L L L L 1B0 2B0 X X X H H Z Z X X X L H Active Z X X X H L Z Active X X X L L Active Active
Philips Semiconductors Product specification 74ALVT162602.5V/3.3V 12-bit to 24-bit multiplexed D-type latches (3-State)
1998 Jan 30 4
LOGIC DIAGRAM (POSITIVE LOGIC) LE1B LE2B LEA1B LEA2B OE2B OE1B OEA SEL 2B1 1B1 TO 11 OTHER CHANNELS SA00436
Philips Semiconductors Product specification 74ALVT162602.5V/3.3V 12-bit to 24-bit multiplexed D-type latches (3-State)
1998 Jan 30 5
ABSOLUTE MAXIMUM RATINGS 1, 2 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +4.6 V IIK DC input diode current VI < 0 –50 mA VI DC input voltage3 –0.5 to +7.0 V IOK DC output diode current VO < 0 –50 mA VOUT DC output voltage3 Output in Off or High state –0.5 to +7.0 V IO DC output current Output in Low state 128 mAIOUT DC output current Output in High state –64 mA Tstg Storage temperature range –65 to +150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER 2.5V RANGE LIMITS 3.3V RANGE LIMITS UNITSYMBOL PARAMETER MIN MAX MIN MAX UNIT VCC DC supply voltage 2.3 2.7 3.0 3.6 V VI Input voltage 0 5.5 0 5.5 V VIH High-level input voltage 1.7 2.0 V VIL Input voltage 0.7 0.8 V IOH High-level output current –8 –32 mA IOL Low-level output current 8 32 mAIOL Low-level output current; current duty cycle ≤ 50%; f ≥ 1kHz 24 64 mA Δt/Δv Input transition rise or fall rate; Outputs enabled 10 10 ns/V Tamb Operating free-air temperature range –40 +85 –40 +85 °C
Philips Semiconductors Product specification 74ALVT162602.5V/3.3V 12-bit to 24-bit multiplexed D-type latches (3-State)
1998 Jan 30 6
DC ELECTRICAL CHARACTERISTICS (3.3V 0.3V RANGE) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40°C to +85°C UNIT MIN TYP 1 MAX VIK Input clamp voltage VCC = 3.0V; IIK = –18mA –0.85 1.2 V VCC = 3.0V; IOL = 100µA 0.07 0.2 VCC = 3.0V; IOL = 64mA 0.4 0.55 VRST Power-up output low voltage6 VCC = 3.6V; IO = 1mA; VI = VCC or GND 0.55 V VCC = 3.6V; VI = VCC or GND Control pins 0.1 ±1 VCC = 3.6V; VI = 0V Data ins4 0.1 -5 IOFF Off current VCC = 0V; VI or VO = 0 to 4.5V 0.1 ±100 µA Bus Hold current VCC = 3V; VI = 0.8V 75 130 IHOLD Bus Hold current Data inputs7 VCC = 3V; VI = 2.0V –75 –140 µA Data inputs7 VCC = 0V to 3.6V; VCC = 3.6V ±500 IEX Current into an output in the High state when VO > VCC VO = 5.5V; VCC = 3.0V 10 125 µA IPU/PD Power up/down 3-State output current3 VCC ≤ 1.2V; VO = 0.5V to VCC ; VI = GND or VCC OE/OE = Don’t care 1 ±100 µA IOZH 3-State output High currentVCC = 3.6V; VO = 3.0V; VI = VIL or VIH 0.5 5 µA IOZL 3-State output Low current VCC = 3.6V; VO = 0.5V; VI = VIL or VIH 0.5 5 µA ICCH VCC = 3.6V; Outputs High, VI = GND or VCC, IO = 0 0.04 0.1 ICCL Quiescent supply current VCC = 3.6V; Outputs Low, VI = GND or VCC, IO = 0 3.7 6 mA ICCZ VCC = 3.6V; Outputs Disabled; VI = GND or VCC, IO = 05 0.04 0.1 ΔICC Additional supply current per input pin2 VCC = 3V to 3.6V; One input at VCC –0.6V, Other inputs at VCC or GND 0.04 0.4 mA NOTES: 1. All typical values are at VCC = 3.3V and Tamb = 25°C. 2. This is the increase in supply current for each input at the specified voltage level other than VCC or GND transition time of 100µsec is permitted. This parameter is valid for Tamb = 25°C only. 4. Unused pins at VCC or GND. 5. ICCZ is measured with outputs pulled up to VCC or pulled down to ground. 6. For valid test results, data must not be loaded into the flip-flops (or latches) after applying power. 7. This is the bus hold overdrive current required to force the input to the opposite logic state.
Philips Semiconductors Product specification 74ALVT162602.5V/3.3V 12-bit to 24-bit multiplexed D-type latches (3-State)
1998 Jan 30 7
AC ELECTRICAL CHARACTERISTICS (3.3V ± 0.3V RANGE) GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500Ω SYMBOL PARAMETER Tamb = –40°C to +85°C VCC = +3.3V ± 0.3V UNIT FROM (INPUT) TO (OUTPUT) MIN TYP MAX tPLH Ao rB Bo rA 1 2.8 4.8 ns tPHL A or B B or A 1 2.6 4.6 ns tPLH LE Ao rB 1.1 2.9 4.6 ns tPHL LE A or B 1.1 3.1 4.7 ns t SEL (B1) A 1.3 2.3 3.4 ns tPLH SEL (B2) A 1.1 2.4 3.8 ns t SEL (B1) A 1.5 2.4 3.6 ns tPHL SEL (B2) A 1.6 2.4 3.6 ns tPZH OE Ao rB 1 2.3 4.2 ns tPZL OE A or B 1.6 2.3 4.0 ns tPHZ OE Ao rB 2.2 4.4 6.0 ns tPLZ OE A or B 1.3 3.1 5.0 ns AC SETUP CHARACTERISTICS (3.3V ± 0.3V RANGE) GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500Ω SYMBOL PARAMETER Tamb = –40°C to +85°C VCC = +3.3V ± 0.3V UNIT MIN MAX tw Pulse duration, LE1B, LE2B, LEA1B, or LEA2B high 3.3 ns tsu Setup time, data before LE1B, LE2B, LEA1B, or LEA2B↓ 1 ns th Hold time, data after LE1B, LE2B, LEA1B, or LEA2B↓ 1 ns
Philips Semiconductors Product specification 74ALVT162602.5V/3.3V 12-bit to 24-bit multiplexed D-type latches (3-State)
1998 Jan 30 8
DC ELECTRICAL CHARACTERISTICS (2.5V 0.2V RANGE) LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40°C to +85°C UNIT MIN TYP 1 MAX VIK Input clamp voltage VCC = 2.3V; IIK = –18mA –0.85 –1.2 V VRST Power-up output low voltage7 VCC = 2.7V; IO = 1mA; VI = VCC or GND 0.55 V VCC = 2.7V; VI = VCC or GND Control pins 0.1 ±1 VCC = 2.7V; VI = 0 Data ins4 0.1 -5 IOFF Off current VCC = 0V; VI or VO = 0 to 4.5V 0.1 100 µA IH O LD Bus Hold current VCC = 2.3V; VI = 0.7V 90 µAHOLD Data inputs6 VCC = 2.3V; VI = 1.7V –10 µA IEX Current into an output in the High state when VO > VCC VO = 5.5V; VCC = 2.3V 10 125 µA IPU/PD Power up/down 3-State output current3 VCC ≤ 1.2V; VO = 0.5V to VCC ; VI = GND or VCC ; OE/OE = Don’t care 1 100 µA IOZH 3-State output High currentVCC = 2.7V; VO = 2.3V; VI = VIL or VIH 0.5 5 µA IOZL 3-State output Low current VCC = 2.7V; VO = 0.5V; VI = VIL or VIH 0.5 –5 µA ICCH VCC = 2.7V; Outputs High, VI = GND or VCC, IO = 0 0.04 0.1 ICCL Quiescent supply current VCC = 2.7V; Outputs Low, VI = GND or VCC, IO = 0 2.7 4.5 mA ICCZ VCC = 2.7V; Outputs Disabled; VI = GND or VCC, IO = 05 0.04 0.1 ΔICC Additional supply current per input pin2 VCC = 2.3V to 2.7V; One input at VCC –0.6V, Other inputs at VCC or GND 0.04 0.4 mA NOTES: 1. All typical values are at VCC = 2.5V and Tamb = 25°C. 2. This is the increase in supply current for each input at the specified voltage level other than VCC or GND transition time of 100µsec is permitted. This parameter is valid for Tamb = 25°C only. 4. Unused pins at VCC or GND. 5. ICCZ is measured with outputs pulled up to VCC or pulled down to ground. 6. Not guaranteed. 7. For valid test results, data must not be loaded into the flip-flops (or latches) after applying power.
Philips Semiconductors Product specification 74ALVT162602.5V/3.3V 12-bit to 24-bit multiplexed D-type latches (3-State)
1998 Jan 30 9
AC ELECTRICAL CHARACTERISTICS (2.5V ± 0.2V RANGE) GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500Ω SYMBOL PARAMETER Tamb = –40°C to +85°C VCC = +2.5V ± 0.2V UNIT FROM (INPUT) TO (OUTPUT) MIN TYP MAX tPLH Ao rB Bo rA 1 3.5 5.3 ns tPHL A or B B or A 1 3.3 5.4 ns tPLH LE Ao rB 1.1 3.9 6.0 ns tPHL LE A or B 1.1 4.2 6.2 ns t SEL (B1) A 1.3 2.9 4.5 ns tPLH SEL (B2) A 1.1 3.3 4.8 ns t SEL (B1) A 1.5 3.0 4.5 ns tPHL SEL (B2) A 1.6 3.2 4.6 ns tPZH OE Ao rB 1 3.1 5.0 ns tPZL OE A or B 1.6 2.0 3.0 ns tPHZ OE Ao rB 2.2 4.0 6.6 ns tPLZ OE A or B 1.3 2.0 3.4 ns AC SETUP CHARACTERISTICS (2.5V ± 0.2V RANGE) GND = 0V; tR = tF = 2.5ns; CL = 50pF; RL = 500Ω SYMBOL PARAMETER Tamb = –40°C to +85°C VCC = +2.5V ± 0.2V UNIT MIN MAX tw Pulse duration, LE1B, LE2B, LEA1B, or LEA2B high 3.3 ns tsu Setup time, data before LE1B, LE2B, LEA1B, or LEA2B↓ 1 ns th Hold time, data after LE1B, LE2B, LEA1B, or LEA2B↓ 1 ns
1998 Jan 30 10
The outputs are measured one at a time with one transition per measurement. Figure 1. Pulse duration characteristics: PRR ≤ 10MHz, ZO = 50Ω , tr ≤ 2.5ns, tf ≤ 2.5ns. Figure 2. Propagation delay times; Figure 3. Setup and hold times output is low except when disabled by the output control. output is high except when disabled by the output control. Figure 4. Enable and disable times; Figure 5. Test load circuit
Philips Semiconductors Product specification 74ALVT1626012-bit to 24-bit multiplexed D-type latches (3-State)
1988 Jan 30 11
SSOP56: plastic shrink small outline package; 56 leads; body width 7.5 mm SOT371-1
Philips Semiconductors Product specification 74ALVT1626012-bit to 24-bit multiplexed D-type latches (3-State)
1988 Jan 30 12
TSSOP56: plastic thin shrink small outline package; 56 leads; body width 6.1mm SOT364-1
Philips Semiconductors Product specification 74ALVT1626012-bit to 24-bit multiplexed D-type latches (3-State)
1988 Jan 30 13
Philips Semiconductors Product specification 74ALVT1626012-bit to 24-bit multiplexed D-type latches (3-State)
1988 Jan 30 14
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 05-96 Document order number: 9397-750-03337 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.