74ALVT16240 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 16

Technical content

  1. General description The 74ALVT16240 is a high-performance BiCMOS device designed for VCC operation at 2.5 V or 3.3 V with I/O compatibility up to 5 V. The 74ALVT16240 is an inverting 16-bit buffer that is ideal for driving bus lines. The device features four output enable inputs (1OE, 2OE, 3OE, 4OE), each controlling four of the 3-state outputs. 2. Features ■ 5 V I/O compatible ■ Live insertion and extraction permitted ■ 3-state buffers ■ Power-up 3-state ■ Output capability: +64 mA and−32 mA ■ Latch-up protection: ◆ JESD 78 exceeds 500 mA ■ Electrostatic discharge protection: ◆ MIL STD 883 method 3015: exceeds 2000 V ◆ Machine model: exceeds 200 V ■ Bus hold data inputs eliminate need for external pull-up resistors to hold unused inputs ■ 16-bit bus interface ■ TTL input and output switching levels ■ Input and output interface capability to systems at 5 V supply ■ No bus current loading when output is tied to 5 V bus 3. Quick reference data 74ALVT16240 16-bit inverting buffer/driver; 3-state Rev. 03 — 4 July 2005 Product data sheet Table 1: Quick reference data Tamb = 25°C. Symbol Parameter Conditions Min Typ Max Unit tPLH propagation delay nAx to nYx C L = 50 pF; VCC = 2.5 V 1.0 2.5 3.7 ns C L = 50 pF; VCC = 3.3 V 0.5 1.7 3.0 ns tPHL propagation delay nAx to nYx C L = 50 pF; VCC = 2.5 V 1.0 1.9 2.9 ns C L = 50 pF; VCC = 3.3 V 0.5 1.7 2.6 ns C i input capacitance on nOE VI = 0 V or VCC -3 -p F

9397 750 15192 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 4 July 2005 2 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 4. Ordering information 5. Functional diagram C o output capacitance VI/O = 0 V or VCC -9 -p F ICC supply current outputs disabled; VCC = 2.5 V - 40 100 µA outputs disabled; VCC = 3.3 V - 60 100 µA Table 1: Quick reference data …continued Tamb = 25°C. Symbol Parameter Conditions Min Typ Max Unit Table 2: Ordering information Type number Package Temperature range Name Description Version 74ALVT16240DL −40 °C to +85°C SSOP48 plastic shrink small outline package; 48 leads; body width 7.5 mm SOT370-1 74ALVT16240DGG −40 °C to +85°C TSSOP48 plastic thin shrink small outline package; 48 leads; body width 6.1 mm SOT362-1 Fig 1. Logic symbol Fig 2. Logic diagram 001aad262 1A0 1A1 1A2 1A3 2A0 2A1 2A2 2A3 3A0 3A1 3A2 3A3 4A0 4A1 4A2 4A3 1Y0 1Y1 1Y2 1Y3 2Y0 2Y1 2Y2 2Y3 3Y0 3Y1 3Y2 3Y3 4Y0 4Y1 4Y2 4Y3 4OE 1OE 2OE 3OE EN1 EN2 EN3 EN4 001aad261 1A0 1A1 1A2 1A3 1Y0 1Y1 1Y2 1Y3 1OE 3OE 3A0 3A1 3A2 3A3 3Y0 3Y1 3Y2 3Y3 4A0 4A1 4A2 4A3 4Y0 4Y1 4Y2 4Y3 4OE2OE 2A0 2A1 2A2 2A3 2Y0 2Y1 2Y2 2Y3

9397 750 15192 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 4 July 2005 3 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 6. Pinning information

6.1 Pinning

6.2 Pin description

Fig 3. Pin configuration 16240 1OE 2OE 1Y0 1A0 1Y1 1A1 GND GND 1Y2 1A2 1Y3 1A3 V CC VCC 2Y0 2A0 2Y1 2A1 GND GND 2Y2 2A2 2Y3 2A3 3Y0 3A0 3Y1 3A1 GND GND 3Y2 3A2 3Y3 3A3 V CC VCC 4Y0 4A0 4Y1 4A1 GND GND 4Y2 4A2 4Y3 4A3 4OE 3OE 001aad263 Table 3: Pin description Symbol Pin Description 1OE 1 output enable input (active LOW) 1Y0 2 data output 1Y1 3 data output GND 4 ground (0 V) Y2 5 data output 1Y3 6 data output VCC 7 supply voltage 2Y0 8 data output 2Y1 9 data output GND 10 ground (0 V) Y2 11 data output

9397 750 15192 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 4 July 2005 4 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 2Y3 12 data output 3Y0 13 data output 3Y1 14 data output GND 15 ground (0 V) Y2 16 data output 3Y4 17 data output VCC 18 supply voltage 4Y0 19 data output 4Y1 20 data output GND 21 ground (0 V) Y2 22 data output 4Y3 23 data output 4OE 24 output enable input (active LOW) 3OE 25 output enable input (active LOW) 4A3 26 data input 4A2 27 data input GND 28 ground (0 V) 4A1 29 data input 4A0 30 data input V CC 31 supply voltage 3A3 32 data input 3A2 33 data input GND 34 ground (0 V) 3A1 35 data input 3A0 36 data input 2A3 37 data input 2A2 38 data input GND 39 ground (0 V) 2A1 40 data input 2A0 41 data input V CC 42 supply voltage 1A3 43 data input 1A2 44 data input GND 45 ground (0 V) 1A1 46 data input 1A0 47 data input OE 48 output enable input (active LOW) Table 3: Pin description …continued Symbol Pin Description

9397 750 15192 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 4 July 2005 5 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 7. Functional description

7.1 Function table

[1] H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = high-impedance OFF-state. 8. Limiting values [1] The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed. [2] The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. Table 4: Function table[1] Input Output nOE nAx nYx LLH LH L HXZ Table 5: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to ground. Symbol Parameter Conditions Min Max Unit VCC supply voltage −0.5 +4.6 V IIK input diode current VI < 0 V - −50 mA VI input voltage [1] −0.5 +7.0 V IOK output diode current VO < 0 V - −50 mA VO output voltage output in OFF-state or HIGH-state [1] −0.5 +7.0 V IO output current output in LOW-state - 128 mA output in HIGH-state - −64 mA Tstg storage temperature −65 +150 °C Tj junction temperature [2] - +150 °C

9397 750 15192 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 4 July 2005 6 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 9. Recommended operating conditions Table 6: Recommended operating conditions Symbol Parameter Conditions Min Typ Max Unit VCC = 2.5 V± 0.2 V VCC supply voltage 2.3 - 2.7 V VI input voltage 0 - 5.5 V VIH HIGH-level input voltage 1.7 - - V VIL LOW-level input voltage - - 0.7 V IOH HIGH-level output current - - −8m A IOL LOW-level output current none - - 8 mA current duty cycle≤ 50 %; f≥ 1 kHz - - 24 mA Δt/ΔV input transition rise or fall rate outputs enabled - - 10 ns/V Tamb ambient temperature in free air −40 - +85 °C VCC = 3.3 V± 0.3 V VCC supply voltage 3.0 - 3.6 V VI input voltage 0 - 5.5 V VIH HIGH-level input voltage 2.0 - - V VIL LOW-level input voltage - - 0.8 V IOH HIGH-level output current - - −32 mA IOL LOW-level output current none - - 32 mA current duty cycle≤ 50 %; f≥ 1 kHz - - 64 mA Δt/ΔV input transition rise or fall rate outputs enabled - - 10 ns/V Tamb ambient temperature in free air −40 - +85 °C

9397 750 15192 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 4 July 2005 7 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 10. Static characteristics Table 7: Static characteristics At recommended operating conditions; voltages are referred to GND (ground = 0 V); Tamb =−40 °C to +85°C. Symbol Parameter Conditions Min Typ Max Unit VIK input diode voltage V CC = 2.3 V; IIK =−18 mA - −0.85 −1.2 V VOH HIGH-level output voltage VCC = 2.3 V to 3.6 V; IOH =−100 µAV CC − 0.2 VCC -V VCC = 2.3 V; IOH =−8 mA 1.8 2.5 - V VOL LOW-level output voltage VCC = 2.3 V IOL = 100µA - 0.07 0.2 V IOL = 24 mA - 0.3 0.5 V IOL = 8 mA - - 0.4 V ILI input leakage current control pins V CC = 2.7 V; VI = VCC or GND - 0.1 ±1 µA VCC = 0 V or 2.7 V; VI = 5.5 V - 0.1 10 µA data pins V CC = 2.7 V; VI = VCC [2] - 0.1 1 µA IOFF power-down output current VCC = 0 V; VI or VO = 0 V to 4.5 V - 0.1 ±100 µA IHOLD bus hold current on data inputs VCC = 2.3 V; VI = 0.7 V [3] -9 0 - µA IEX external current into output output HIGH-state; VO = 5.5 V; VCC = 2.3 V - 10 125 µA IPU power-up 3-state output current VCC ≤ 1.2 V; VO = 0.5 V to VCC ; VI= GND or VCC [4] -1 ±100 µA IPD power-down 3-state output current VCC ≤ 1.2 V; VO = 0.5 V to VCC ; VI= GND or VCC [4] -1 ±100 µA IOZ 3-state output current VCC = 2.7 V; VI = VIL or VIH output HIGH-state; VO = 2.3 V - 0.5 5 µA output LOW-state; VO = 0.5 V - +0.5 −5 µA ICC supply current V CC = 2.7 V; VI= GND or VCC ;IO =0A outputs HIGH-state - 0.04 0.1 mA outputs LOW-state - 2.7 4.5 mA outputs disabled [5] - 0.04 0.1 mA ΔICC additional supply current per input pin VCC = 2.3 V to 2.7 V; one input at VCC − 0.6 V; other inputs at VCC or GND [6] - 0.04 0.4 mA C i input capacitance on nOE V I = 0 V or VCC -3 - p F C o output capacitance V I/O = 0 V or VCC -9 - p F VIK input diode voltage V CC = 3.0 V; IIK =−18 mA - −0.85 −1.2 V VOH HIGH-level output voltage VCC = 3.0 V to 3.6 V; IOH =−100 µAV CC − 0.2 VCC -V VCC = 3.0 V; IOH =−32 mA 2.0 2.3 - V

9397 750 15192 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 4 July 2005 8 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state [1] All typical values are at VCC = 2.5 V and Tamb = 25°C. [2] Unused pins at VCC or GND. [3] This is the bus hold overdrive current required to force the input to the opposite logic state. [4] This parameter is valid for any V a transition time of 100µs is permitted. This parameter is valid for Tamb = 25°C only. [5] ICC is measured with outputs pulled up to VCC or pulled down to ground. [6] This is the increase in supply current for each input at the specified voltage level other than VCC or GND. [7] All typical values are at VCC = 3.3 V and Tamb = 25°C. a transition time of 100µs is permitted. This parameter is valid for Tamb = 25°C only. VOL LOW-level output voltage VCC = 3.0 V IOL = 100µA - 0.07 0.2 V IOL = 16 mA - 0.25 0.4 V IOL = 32 mA - 0.3 0.5 V IOL = 64 mA - 0.4 0.55 V ILI input leakage current control pins V CC = 3.6 V; VI = VCC or GND - 0.1 ±1 µA VCC = 0 V or 3.6 V; VI = 5.5 V - 0.1 10 µA data pins V CC = 3.6 V; VI = VCC [2] - 0.5 1 µA IOFF power-down output current VCC = 0 V; VI or VO = 0 V to 4.5 V - 0.1 ±100 µA IHOLD bus hold current on data inputs VCC = 3 V; VI = 0.8 V [3] 75 130 - µA VCC = 3 V; VI = 2.0 V [3] −75 −140 - µA VCC = 0 V to 3.6 V; VI = 3.6 V [3] ±500 - - µA IPU power-up 3-state output current VCC ≤ 1.2 V; VO = 0.5 V to VCC ; VI= GND or VCC [8] -1 ±100 µA IPD power-down 3-state output current VCC ≤ 1.2 V; VO = 0.5 V to VCC ; VI= GND or VCC [8] -1 ±100 µA IOZ 3-state output current VCC = 3.6 V; VI = VIL or VIH output HIGH-state; VO = 3.0 V - 0.5 5 µA output LOW-state; VO = 0.5 V - +0.5 −5 µA ICC supply current V CC = 3.6 V; VI= GND or VCC ;IO =0A outputs HIGH-state - 0.05 0.1 mA outputs LOW-state - 3.9 5.5 mA outputs disabled [5] - 0.06 0.1 mA ΔICC additional supply current per input pin VCC = 3 V to 3.6 V; one input at VCC − 0.6 V; other inputs at VCC or GND [6] - 0.04 0.4 mA Table 7: Static characteristics …continued At recommended operating conditions; voltages are referred to GND (ground = 0 V); Tamb =−40 °C to +85°C. Symbol Parameter Conditions Min Typ Max Unit

9397 750 15192 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 4 July 2005 9 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 11. Dynamic characteristics [1] All typical values are at VCC = 2.5 V and Tamb = 25°C. [2] All typical values are at VCC = 3.3 V and Tamb = 25°C. Table 8: Dynamic characteristics GND = 0 V; Tamb =−40 °C to +85°C; for test circuit seeFigure6. Symbol Parameter Conditions Min Typ Max Unit tPLH propagation delay nAx to nYx see Figure4 1.0 2.5 3.7 ns tPHL propagation delay nAx to nYx see Figure4 1.0 1.9 2.9 ns tPZH output enable time to HIGH-level see Figure5 1.0 3.3 5.3 ns tPZL output enable time to LOW-level see Figure5 1.0 2.6 4.2 ns tPHZ output disable time from HIGH-level seeFigure5 1.0 2.5 4.0 ns tPLZ output disable time from LOW-level seeFigure5 1.0 1.8 3.0 ns tPLH propagation delay nAx to nYx see Figure4 0.5 1.7 3.0 ns tPHL propagation delay nAx to nYx see Figure4 0.5 1.7 2.6 ns tPZH output enable time to HIGH-level see Figure5 1.0 2.5 3.2 ns tPZL output enable time to LOW-level see Figure5 1.0 1.9 3.1 ns tPHZ output disable time from HIGH-level seeFigure5 1.5 2.8 4.1 ns tPLZ output disable time from LOW-level seeFigure5 1.5 2.3 3.4 ns

9397 750 15192 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 4 July 2005 10 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 12. Waveforms Measurement points are given inTable9. VOL and VOH are typical voltage output drop that occur with the output load. Fig 4. Input (nAx) to output (nYx) propagation delays Measurement points are given inTable9. VOL and VOH are typical voltage output drop that occur with the output load. Fig 5. 3-state output enable and disable times Table 9: Measurement points Supply voltage Input Output VCC VM VM VX VY ≥ 3 V 1.5 V 1.5 V V OL + 0.3 V V OH − 0.3 V input nAx output nYx VM tPLHtPHL VM VM VM 001aad264 VOH VI VOL 0 V 001aad265 input nOE output nYx VM 0 V VOH VM tPLZtPZL tPHZtPZH output nYx VOL VI VI 0 V VM VM VY VX

9397 750 15192 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 4 July 2005 11 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state a. Input pulse definition Test data is given inTable10. Definitions test circuit: R L = Load resistor. C L = Load capacitance includes jig and probe capacitance. R T = Termination resistance should be equal to Zo of the pulse generator. VEXT = Test voltage for switching times. b. Test circuit Fig 6. Load circuitry for switching times Table 10: Test data Input Load VEXT VI fi tW tr, tf C L R L tPHZ , tPZH tPLZ , tPZL tPLH , tPHL

3.0 V or VCC

≤ 10 MHz 500 ns ≤ 2.5 ns 50 pF 500Ω GND 6 V or 2 × VCC open 001aac221 VM VM tW tW 10 % 90 % 90 % 0 V VI VI negative pulse positive pulse 0 V VM VM 90 % 10 % 10 % tTHL (tf) tTLH (tr) tTLH (tr) tTHL (tf) VEXT VCC VI VO mna616 DUT C LR T R L R L PULSE GENERATOR

9397 750 15192 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 4 July 2005 12 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 13. Package outline Fig 7. Package outline SOT370-1 (SSOP48) UNIT A 1 A 2 A 3 bp cD (1) E (1) eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.4 0.2 2.35 2.20 0.25 0.3 0.2 0.22 0.13 16.00 15.75 7.6 10.1 1.0 0.6 1.2 1.0 0.85 0.40 o o0.18 0.1 DIMENSIONS (mm are the original dimensions) Note 1. Plastic or metal protrusions of 0.25 mm maximum per side are not included. SOT370-1 99-12-27 03-02-19 (1) w M bp D H E E Z e c v M A X A y 48 25 MO-118 241 q AA 1 A 2 Lp Q detail X L (A )3 pin 1 index 0 5 10 mm scale SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm SOT370-1 A max. 2.8

9397 750 15192 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 4 July 2005 13 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state Fig 8. Package outline SOT362-1 (TSSOP48) UNIT A 1 A 2 A 3 bp cD (1) E (2) eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.05 0.2 0.1 o o0.1 DIMENSIONS (mm are the original dimensions). Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. SOT362-1 99-12-27 03-02-19 w M q AA 1 A 2 D Lp Q detail X E Z e c L X (A )3 0.25 12 4 48 25 y pin 1 index b H 1.05 0.85 0.28 0.17 0.2 0.1 12.6 12.4 6.2 6.0 0.5 1 0.258.3 7.9 0.50 0.35 0.8 0.40.080.8 0.4 p E v M A A TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6.1 mm SOT362-1 A max. 1.2 0 2.5 5 mm scale MO-153

9397 750 15192 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 4 July 2005 14 of 16 Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 14. Revision history Table 11: Revision history Document ID Release date Data sheet status Change notice Doc. number Supersedes 74ALVT16240_3 20050704 Product data sheet - 9397 750 15192 74ALVT16240_2 Modifications:

  • The format of this data sheet has been redesigned to comply with the new presentation and information standard of Philips Semiconductors.
  • InTable8; update of the typical and maximum value of tPZH at VCC = 3.3 V± 0.3 V 74ALVT16240_2 19980213 Product specification - 9397 750 03615 74ALVT16240_1 74ALVT16240_1 19970502 - - - -

Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 9397 750 15192 © Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 03 — 4 July 2005 15 of 16 15. Data sheet status [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 16. Definitions Short-form specification —The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 17. Disclaimers Life support —These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes —Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 18. Trademarks Notice —All referenced brands, product names, service names and trademarks are the property of their respective owners. 19. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com Level Data sheet status[1] Product status[2][3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).

© Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 4 July 2005 Document number: 9397 750 15192 Published in The Netherlands Philips Semiconductors 74ALVT16240 16-bit inverting buffer/driver; 3-state 20. Contents