74ALVCH16373 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 12

Technical content

/C0080 /C0115 /C0111/C0110/C0111 /C0115 74ALVCH16373 2.5V/3.3V 16-bit D-type transparent latch (3-State) Product specification Supersedes data of 1998 Jun 29 IC24 Data Handbook

1999 Sep 20

Philips Semiconductors Product specification 74ALVCH1637316-bit D-type transparent latch (3-State)

21999 Sep 20 853-2086 22418

FEATURES

  • Wide supply voltage range of 1.2V to 3.6V
  • Complies with JEDEC standard no. 8-1A
  • CMOS low power consumption
  • MULTIBYTE TM flow-through standard pin-out architecture
  • Low inductance multiple VCC and ground pins for minimum noise and ground bounce
  • Direct interface with TTL levels
  • All data inputs have bus hold
  • Output drive capability 50Ω transmission lines @ 85°C
  • Current drive ±24 mA at 3.0 V

DESCRIPTION

The 74ALVCH16373 is a 16-bit D-type transparent latch featuring separate D-type inputs for each latch and 3-State outputs for bus oriented applications. Incorporates bus hold data inputs which eliminate the need for external pull-up or pull-down resistors to hold unused inputs. One latch enable (LE) input and one output enable (OE ) are provided per 8-bit section. The 74ALVCH16373 consists of 2 sections of eight D-type transparent latches with 3-State true outputs. When LE is HIGH, data at the Dn inputs enter the latches. In this condition the latches are transparent, i.e., a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the D-inputs a set-up time preceding the HIGH-to-LOW transition of LE. When OE is LOW, the contents of the eight latches are available at the outputs. When OE is HIGH, the outputs go to the high impedance OFF-state. Operation of the OE input does not affect the state of the latches. PIN CONFIGURATION 20 29 481OE 1Q0 1Q1 GND 1Q2 1Q3 VCC 1Q5 GND 1Q6 1Q7 2Q0 2Q1 GND 1Q4 2Q2 2Q3 VCC 2Q4 2Q5 2D5 2D4 VCC 2D3 2D2 GND 2D1 2D0 1D7 1D6 GND 1D5 1D4 V CC 1D3 1D2 GND 1D1 1D0 1LE 24 25 28GND 2Q6 2Q7 2OE 2LE 2D7 2D6 GND SW00066 QUICK REFERENCE DATA GND = 0V; Tamb = 25°C; tr = tf ≤ 2.5ns SYMBOL PARAMETER CONDITIONS TYPICAL UNIT Propagation delay VCC = 2.5V, CL = 30pF 2.1 t /t gy Dn to Qn VCC = 3.3V, CL = 50pF 2.1 nstPHL /tPLH Propagation delay VCC = 2.5V, CL = 30pF 2.2 ns gy LE to Qn VCC = 3.3V, CL = 50pF 2.2 C I Input capacitance 5.0 pF C Power dissipation capacitanceper latch V = GND to VCC 1 Outputs enabled 16 pFC PD Pow er dissipation capacitance per latch VI = GND to VCC 1 Outputs disabled 10 pF NOTE: 1. CPD is used to determine the dynamic power dissipation (PD in µW): PD = CPD × VCC 2 × fi + /C0083 (CL × VCC 2 × fo) where: fi = input frequency in MHz; CL = output load capacitance in pF; fo = output frequency in MHz; VCC = supply voltage in V; /C0083 (CL × VCC 2 × fo) = sum of outputs.

ORDERING INFORMATION

PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 48-Pin Plastic SSOP Type III –40°C to +85°C 74ALVCH16373 DL ACH16373 DL SOT370-1 48-Pin Plastic TSSOP Type II –40°C to +85°C 74ALVCH16373 DGG ACH16373 DGG SOT362-1

Philips Semiconductors Product specification 74ALVCH1637316-bit D-type transparent latch (3-State)

1999 Sep 20 3

PIN NUMBER SYMBOL NAME AND FUNCTION 1 1OE Output enable input (active LOW) 2, 3, 5, 6, 8, 9, 11, 12 1Q0 to 1Q7 Data inputs/outputs 4, 10, 15, 21, 28, 34, 39, 45 GND Ground (0V) 7, 18, 31, 42 VCC Positive supply voltage 13, 14, 16, 17, 19, 20, 22, 23 2Q0 to 2Q7 Data inputs/outputs 24 2OE Output enable input (active LOW) 25 2LE Latch enable input (active HIGH) 36, 35, 33, 32, 30, 29, 27, 26 2D0 to 2D7 Data inputs 47, 46, 44, 43, 41, 40, 38, 37 1D0 to 1D7 Data inputs 48 1LE Latch enable input (active HIGH) LOGIC SYMBOL 1OE 2OE 1LE 2LE 1D0 1D1 1D2 1D3 1D4 1D5 1D6 1D7 2D0 2D1 2D2 2D3 2D4 2D5 2D6 2D7 1Q0 1Q1 1Q2 1Q3 1Q4 1Q5 1Q6 1Q7 2Q0 2Q1 2Q2 2Q3 2Q4 2Q5 2Q6 2Q7 48 25 241 SW00067 LOGIC DIAGRAM DQ LE LE LATCH 1D0 1LE 1OE 1Q0 TO 7 OTHER CHANNELS DQ LE LE LATCH 2D0 2LE 2OE 2Q0 TO 7 OTHER CHANNELS SW00068 FUNCTION TABLE (per section of eight bits) OPERATING MODES INPUTS INTERNAL OUTPUTS OPERATING MODES nOE nLE nDn LATCHES nQn Enable and read register (transparent mode) L L H H L H L H L H Latch and read register (hold mode) L L L L l h L H L H Latch register and disable outputs H H L L l h L H Z Z H = HIGH voltage level h = HIGH voltage level one set-up time prior to the HIGH-to-LOW LE transition L = LOW voltage level l = LOW voltage level one set-up time prior to the HIGH-to-LOW LE transition X = don’t care Z = high impedance OFF-state

Philips Semiconductors Product specification 74ALVCH1637316-bit D-type transparent latch (3-State)

1999 Sep 20 4

LOGIC SYMBOL (IEEE/IEC) SW00524 1EN 1 ∇ 2EN 2 ∇4D 1OE 1LE 1D0 1D1 1D2 1D3 1D4 1D5 1D6 2D0 2D1 2D2 2D3 2D4 2D5 2D6 2D7 1Q0 1Q1 1Q2 1Q3 1Q4 1Q5 1Q6 1Q7 2Q0 2Q1 2Q2 2Q3 2Q4 2Q7 1D7 2Q5 2Q6 2OE 2LE BUS HOLD CIRCUIT To internal circuit VCC Data Input SW00044 RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER CONDITIONS LIMITS UNITSYMBOL PARAMETER CONDITIONS MIN MAX UNIT VCC DC supply voltage 2.5V range (for max. speed performance @ 30 pF output load) 2.3 2.7 VVCC DC supply voltage 3.3V range (for max. speed performance @ 50 pF output load) 3.0 3.6 V V DC Input voltage range For data input pins 0 VCC VVI DC Input voltage range For control pins 0 5.5 V VO DC output voltage range 0 VCC V Tamb Operating free-air temperature range –40 +85 °C tr, tf Input rise and fall times VCC = 2.3 to 3.0V VCC = 3.0 to 3.6V ns/V

Philips Semiconductors Product specification 74ALVCH1637316-bit D-type transparent latch (3-State)

1999 Sep 20 5

In accordance with the Absolute Maximum Rating System (IEC 134) Voltages are referenced to GND (ground = 0V) SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +4.6 V IIK DC input diode current VI 0 –50 mA VI DC input voltage For control pins2 –0.5 to +4.6 VVI DC in ut voltage For data inputs2 –0.5 to VCC +0.5 V IOK DC output diode current VO VCC or VO 0 /C003450 mA VO DC output voltage Note 2 –0.5 to VCC +0.5 V IO DC output source or sink currentVO = 0 to VCC /C003450 mA IGND , ICC DC V CC or GND current /C0034100 mA Tstg Storage temperature range –65 to +150 °C PTOT Power dissipation per package –plastic medium-shrink (SSOP) –plastic thin-medium-shrink (TSSOP) For temperature range: –40 to +125 °C above +55°C derate linearly with 11.3 mW/K above +55°C derate linearly with 8 mW/K 850 600 mW NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. DC ELECTRICAL CHARACTERISTICS Over recommended operating conditions. Voltage are referenced to GND (ground = 0 V). LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40°C to +85°C UNIT MIN TYP 1 MAX VCC = 1.2V VCC V HIGH level Input voltage VCC = 1.8V 0.7*VCC 0.9 VVIH HIGH level Input voltage VCC = 2.3 to 2.7V 1.7 1.2 V VCC = 2.7 to 3.6V 2.0 1.5 VCC = 1.2V GND V LOW level Input voltage VCC = 1.8V 0.9 0.2*VCC VVIL LOW level Input voltage VCC = 2.3 to 2.7V 1.2 0.7 V VCC = 2.7 to 3.6V 1.5 0.8 VCC =18t o36 V;V =V or V ;IO = 100 µA VCC 02 VCCVCC = 1.8 to 3.6V; VI = VIH or VIL; IO = –100µA VCC 0.2 VCC VCC = 1.8V; VI = VIH or VIL; IO = –6mA VCC 0.4 VCC 0.10 VCC = 2.3V; VI = VIH or VIL; IO = –6mA VCC 0.3 VCC 0.08 VOH HIGH level output voltage VCC = 2.3V; VI = VIH or VIL; IO = –12mA VCC 0.5 VCC 0.17 V VCC = 2.3V; VI = VIH or VIL; IO = –18mA VCC 0.6 VCC 0.26 VCC = 2.7V; VI = VIH or VIL; IO = –12mA VCC 0.5 VCC 0.14 VCC = 3.0V; VI = VIH or VIL; IO = –24mA VCC 1.0 VCC 0.28

Philips Semiconductors Product specification 74ALVCH1637316-bit D-type transparent latch (3-State)

1999 Sep 20 6

DC ELECTRICAL CHARACTERISTICS (Continued) Over recommended operating conditions. Voltage are referenced to GND (ground = 0 V). VCC =18t o36 V; V =V or V ;IO = 100µA GND 02 0VCC = 1.8 to 3.6V; VI = VIH or VIL; IO = 100µA GND 0.20 VCC = 1.8V; VI = VIH or VIL; IO = 6mA 0.09 0.30 VCC = 2.3V; VI = VIH or VIL; IO = 6mA 0.07 0.20 VOL LOW level output voltage VCC = 2.3V; VI = VIH or VIL; IO = 12mA 0.15 0.40 V VCC = 2.3V; VI = VIH or VIL; IO = 12mA 0.23 0.60 VCC = 2.7V; VI = VIH or VIL; IO = 12mA 0.14 0.40 VCC = 3.0V; VI = VIH or VIL; IO = 24mA 0.27 0.55 I Input leakage current per control pin VCC = 1.8 to 3.6V; VI = 5.5V or GND 0.1 5 µAII Input leakage current per dataVCC = 1.8 to 3.6V; 01 5 µA g pin CC VI = VCC or GND 0.1 5 I /I Input current for common I/OVCC = 1.8 to 2.7V; VI = VCC or GND 0.1 10 µAIIHZ/IILZ pins VCC = 3.6V; VI = VCC or GND 0.1 15 µA IOZ 3-State output OFF-state current VCC = 2.7 to 3.6V; VI = VIH or VIL; VO = VCC or GND 0.1 10 µA ICC Quiescent supply current VCC = 1.8 to 2.7V; VI = VCC or GND; IO = 0 0.2 40 µAICC Q uiescent supply current VCC = 2.7 to 3.6V; VI = VCC or GND; IO = 0 0.2 40 µA ΔICC Additional quiescent supply current given per control pinVCC = 2.7V to 3.6V; VI = VCC – 0.6V; IO = 0 150 750 µAΔICC Additional quiescent supply current given per data I/O pin VCC = 2.7V to 3.6V; VI = VCC – 0.6V; IO = 0 150 750 µA I 2 Bus hold LOW sustaining VCC = 2.3V; VI = 0.7V 45 – µAIBHL 2 g current VCC = 3.0V; VI = 0.8V 75 150 µA I 2 Bus hold HIGH sustaining VCC = 2.3V; VI = 1.7V –45 µAIBHH 2 g current VCC = 3.0V; VI = 2.0V –75 –175 µA I O 2 Bus hold LOW overdrive VCC = 2.7V 300 µAIBHLO 2 current VCC = 3.6V 450 µA I O 2 Bus hold HIGH overdrive VCC = 2.7V –300 µAIBHHO 2 current VCC = 3.6V –450 µA NOTES: 1. All typical values are at Tamb = 25°C. 2. Valid for data inputs of bus hold parts.

Philips Semiconductors Product specification 74ALVCH1637316-bit D-type transparent latch (3-State)

1999 Sep 20 7

AC CHARACTERISTICS FOR V CC = 2.3V TO 2.7V RANGE AND VCC < 2.3V GND = 0V; tr = tf ≤ 2.0ns; CL = 30pF LIMITS SYMBOL PARAMETER WAVEFORM VCC = 2.3 to 2.7V VCC = 1.8V VCC = 1.2V UNIT MIN TYP 1, 2 MAX MIN TYP1 MAX TYP tPHL /tPLH Propagation delay tPHL /tPLH Propagation delay nLE to nYn tPZH /tPZL 3-State output enable time nOE to nYn tPHZ /tPLZ 3-State output disable time nOE to nYn tW nLE pulse width HIGH 2 3.0 1.0 – 3.5 1.0 – – ns tSU Set-up time nDn to nLE 3 1.0 –0.1 – 1.0 –0.1 – – ns th Hold time nDn to nLE 3 1.5 0.2 – 1.2 0.1 – – ns NOTES: 1. All typical values are measured at Tamb = 25°C. 2. Typical value is measured at VCC = 2.5V. AC CHARACTERISTICS FOR V CC = 3.0V TO 3.6V RANGE AND VCC = 2.7V GND = 0V; tr = tf ≤ 2.5ns; CL = 50pF LIMITS SYMBOL PARAMETER WAVEFORM VCC = 3.3V ±0.3V VCC = 2.7V UNIT MIN TYP 1, 2 MAX MIN TYP 1 MAX tPHL /tPLH Propagation delay tPHL /tPLH Propagation delay nLE to nYn tPZH /tPZL 3-State output enable time nOE tPHZ /tPLZ 3-State output disable time nOE tW nLE pulse width HIGH 2 2.5 1.0 – 3.0 1.0 – ns tSU Set-up time nDn to nLE 3 1.0 0.0 – 1.0 –0.1 – ns th Hold time nDn to nLE 3 1.2 0.2 – 1.5 0.4 – ns NOTES: 1. All typical values are measured at Tamb = 25°C. 2. Typical value is measured at VCC = 3.3V.

Philips Semiconductors Product specification 74ALVCH1637316-bit D-type transparent latch (3-State)

1999 Sep 20 8

AC WAVEFORMS FOR V CC = 2.3V TO 2.7V AND VCC < 2.3V RANGE VM = 0.5 VCC VX = VOL + 0.15V VY = VOH –0.15V VOL and VOH are the typical output voltage drop that occur with the output load. VI = VCC AC WAVEFORMS FOR V CC = 3.0V TO 3.6V AND VCC = 2.7V RANGE VM = 1.5 V VX = VOL + 0.3V VY = VOH –0.3V VOL and VOH are the typical output voltage drop that occur with the output load. VI = 2.7V SW00070 Dn INPUT VM tPHL tPLH VOL VI VM GND VOH Qn OUTPUT VM Waveform 1. Input (Dn) to output (Qn) propagation delays VM VM VM VM tw tPHL tPLH LE INPUT Qn OUTPUT SW00071 VI GND VOH VOL VM Waveform 2. Latch enable input (LE) pulse width, the latch enable input to output (Qn) propagation delays ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ VM Dn INPUT VMLE INPUT t SU th NOTE: The shaded areas indicate when the input is permitted to change for predictable output performance. SW00073 tSU th VI GND VI GND Waveform 3. Data set-up and hold times for the Dn input to the LE input tPLZ tPZL VI OE INPUT GND VCC OUTPUT LOW-to-OFF OFF-to-LOW VOL VOH OUTPUT HIGH-to-OFF OFF-to-HIGH GND outputs enabled outputs enabled outputs disabled tPHZ VM VM VM tPZH VX VY SW00072 VM Waveform 4. 3-State enable and disable times TEST CIRCUIT SWITCH POSITION PULSE GENERATOR R T VI D.U.T. VO C L VCC R L = 500 Ω Test Circuit for switching times Open GND DEFINITIONS VCC VI < 2.7V V CC TEST S 1 tPLH/tPHL Open R L = Load resistor C L = Load capacitance includes jig and probe capacitance R T = Termination resistance should be equal to ZOUT of pulse generators. 2 /C0060 VCCtPLZ/tPZL 2.7V2.7–3.6V tPHZ/tPZH GND R L = 500 Ω 2 * VCC SV00906 Waveform 5. Load circuitry for switching times

Philips Semiconductors Product specification 74ALVCH163732.5V/3.3V 16-bit D-type transparent latch (3-State)

1999 Sep 20 9

SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm SOT370-1

Philips Semiconductors Product specification 74ALVCH163732.5V/3.3V 16-bit D-type transparent latch (3-State)

1999 Sep 20 10

TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6.1mm SOT362-1

Philips Semiconductors Product specification 74ALVCH163732.5V/3.3V 16-bit D-type transparent latch (3-State)

1999 Sep 20 11

Philips Semiconductors Product specification 74ALVCH163732.5V/3.3V 16-bit D-type transparent latch (3-State)

1999 Sep 20 12

Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Philips Semiconductors

811 East Arques Avenue

P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 DEFINITIONS Data Sheet Identification Product Status Definition Objective Specification Preliminary Specification Product Specification Formative or in Design Preproduction Product Full Production This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product.  Copyright Philips Electronics North America Corporation 1999 All rights reserved. Printed in U.S.A. Date of release: 10-99 Document order number: 9397-750-06515 /C0080 /C0115 /C0111/C0110/C0111 /C0115