74ALVC00 - Low Voltage Quad 2-Input NAND Gate with 3.6 V Tolerant Inputs and Outputs
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 6
Technical content
Features
- 1.65 V to 3.6 V VCC supply operation
- 3.6 V Tolerant Inputs and Outputs
- tPD ♦ 3 ns max for 3.0 V to 3.6 V VCC ♦ 3.5 ns max for 2.3 V to 2.7 V VCC ♦ 4.4 ns max for 1.65 V to 1.95 V VCC
- Power−off High Impedance Inputs and Outputs
- Uses Patented Quiet Series M noise/EMI reduction circuitry
- Latch−up conforms to JEDEC JED78
- ESD Performance: ♦ Human body model > 2000 V ♦ Machine model > 250 V See detailed ordering and shipping information on page 4 of this data sheet.
ORDERING INFORMATION
TSSOP−14, WB CASE 948G Z = Assembly Plan Code XY = Date Code (Year & Week) KK = Lot Run Traceability Code ALVC00 = Specific Device Code ZXYKK ALVC00
www.onsemi.com Logic Symbol IEEE/IEC Connection Diagram Pin Names Description An, On Inputs Outputs Pin Description Bn ABSOLUTE MAXIMUM RATINGS Symbol Parameter Ratings Unit VCC Supply Voltage −0.5 to + 4.6 V VI DC Input Voltage −0.5 to 4.6 V VO Output Voltage (Note 2) −0.5 V to VCC + 0.5 V IIK DC Input Diode Current, VI < 0 V −50 mA IOK DC Input Diode Current VO < 0 V −50 mA IOH/IOL DC Output Source/Sink Current ±50 mA ICC DC Ground Current per Supply Pin ±100 mA TSTG Storage Temperature −65 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. 2. I O Absolute Maximum Rating must be observed, limited to 4.6 V. 3. Floating or unused control inputs must be held HIGH or LOW. RECOMMENDED OPERATING CONDITIONS (Note 3) Symbol Parameter Min. Max. Unit − Power Supply Operating 1.65 3.65 V VI Input Voltage 0 VCC V VO Output Voltage 0 VCC V TA Free−Air Operating Temperature −40 +85 °C Lit/LiV Minimum Input Edge Rate, VIN = 0.8 V to 2.0 V, VCC = 3.0 V − 5 ns/V Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability.
www.onsemi.com DC ELECTRICAL CHARACTERISTICS Symbol Parameter Test Conditions VCC (V) Min. Max. Unit VIH HIGH Level Input Voltage 1.65−1.95 2.3−2.7 2.7 − 3.6 0.65 x VCC 1.7 2.0 V VIL LOW Level Input Voltage 1.65−1.95 2.3−2.7 2.7 − 3.6 0.35 x VCC 0.7 0.8 V VOH HIGH Level Output Voltage IOH = −100 /C0109A 1.65–3.6 VCC – 0.2 − V IOH = −4 mA 1.65 1.2 − IOH = −6 mA 2.3 2.0 − IOH = −12 mA 2.3 2.7 3.0 1.7 2.2 2.4 IOH = −24 mA 3.0 2 − VOL LOW Level Output Voltage IOL = 100 /C0109A 1.65–3.6 − 0.2 V IOL = 4 mA 1.65 − 0.45 IOL = 6 mA 2.3 − 0.4 IOL = 12 mA 2.3 2.7 − 0.7 0.4 IOL = 24 mA 3.0 − − II Input Leakage Current 0 ≤ VI ≤ 3.6 V 3.6 − r5.0 /C0109A ICC Quiescent Supply Current VI = VCC or GND, IO = 0 3.6 − 10 /C0109A 11ICC Increase in ICC per Input VIH = VCC – 0.6 V 3–3.6 − 750 /C0109A AC ELECTRICAL CHARACTERISTICS Symbol Parameter TA = –40/C0053C to +85/C0053C, RL = 500 /C0087 Unit CL = 50 pF CL = 30 pF Min. Max. Min. Max Min Max Min Max CAPACITANCE Symbol Parameter Test Conditions TA = ± 25/C0053C UnitVCC Typical CIN Input Capacitance VI = 0 V or VCC 3.3 4.5 pF CPD Power Dissipation Capacitance 3.3 23 pF f = 10 Mhz, CL = 50 pF 2.5 21 1.8 20
TSSOP−14 5.00x4.40x0.95, 0.65P CASE 948G ISSUE D DATE 30 JUN 2026 GENERIC MARKING DIAGRAM* XXXX XXXX ALYW/C0071 /C0071 14A = Assembly Location L = Wafer Lot Y = Year W = Work Week /C0071 = Pb−Free Package (Note: Microdot may be in either location) *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “/C0071”, may or may not be present. Some products may not follow the Generic Marking. MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS 98ASH70246ADOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1TSSOP−14 5.00x4.40x0.95, 0.65P onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com
onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales