74AHC574D118 NXP

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 18

Technical content

  1. General description The 74AHC574; 74AHCT574 are high-speed Si-gate CMOS devices and are pin compatible with Low Power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74AHC574; 74AHCT574 are octal D-type flip-flops featuring separate D-type inputs for each flip-flop and 3-state outputs for bus oriented applications. A clock (CP) and an output enable ( OE) input are common to all flip-flops. The 8 flip-flops will store the state of their individual D-inputs that meet the set-up and hold times requirements on the LOW-to-HIGH CP transition. When OE is LOW the contents of the 8 flip-flops are available at the outputs. WhenOE is HIGH, the outputs go to the high-impedance OFF-state. Operation of theOE input does not affect the state of the flip-flops. The 74AHC574; 74AHCT574 is functionally identical to the 74AHC564; 74AHCT564, but has non-inverting outputs. The 74AHC574; 74AHCT574 is functionally identical to the 74AHC374; 74AHCT374, but has a different pinning. 2. Features n Balanced propagation delays n All inputs have a Schmitt-trigger action n 3-state non-inverting outputs for bus orientated applications n 8-bit positive, edge-triggered register n Independent register and 3-state buffer operation n Common 3-state output enable input n For 74AHC574 only: operates with CMOS input levels n For 74AHCT574 only: operates with TTL input levels n ESD protection: u HBM JESD22-A114E exceeds 2000 V u MM JESD22-A115-A exceeds 200 V u CDM JESD22-C101C exceeds 1000 V n Multiple package options n Specified from−40 °C to +85°C and from−40 °C to +125°C 74AHC574; 74AHCT574 Octal D-type flip-flop; positive edge-trigger; 3-state Rev. 02 — 24 January 2008 Product data sheet

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved. Table 1. Ordering information

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 02 — 24 January 2008 3 of 18 NXP Semiconductors 74AHC574; 74AHCT574 Octal D-type flip-flop; positive edge-trigger; 3-state Fig 3. Logic symbol Fig 4. IEC logic symbol mna798 OE CP mna446 11 C1 1 EN 1D 19

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved.

5.1 Pinning

5.2 Pin description

Table 2. Pin description

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved. ↑ = LOW-to-HIGH clock transition. [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] Ptot derates linearly with 8 mW/K above 70°C. [3] Ptot derates linearly with 5.5 mW/K above 60°C. [4] Ptot derates linearly with 4.5 mW/K above 60°C. Table 3. Function table[1] Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved.

  1. Recommended operating conditions

Table 5. Recommended operating conditions Voltages are referenced to GND (ground = 0 V). Table 6. Static characteristics Voltages are referenced to GND (ground = 0 V).

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved. Table 6. Static characteristics …continued Voltages are referenced to GND (ground = 0 V).

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved. Table 7. Dynamic characteristics GND = 0 V. For test circuit seeFigure10.

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved. Table 7. Dynamic characteristics …continued GND = 0 V. For test circuit seeFigure10.

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved. [1] Typical values are measured at nominal supply voltage (VCC = 3.3 V and VCC = 5.0 V). [2] tpd is the same as tPLH and tPHL . ten is the same as tPZL and tPZH . tdis is the same as tPLZ and tPHZ . [3] C PD is used to determine the dynamic power dissipation PD (µW).

10.1 Waveforms

GND = 0 V. For test circuit seeFigure10. Measurement points are given inTable8. VOL and VOH are typical voltage output levels that occur with the output load.

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved. Measurement points are given inTable8. VOL and VOH are typical voltage output levels that occur with the output load. The shaded areas indicate when the input is permitted to change for predicable output performance. Measurement points are given inTable8. VOL and VOH are typical voltage output levels that occur with the output load. Table 8. Measurement points

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved. Test data is given inTable9. T = Termination resistance should be equal to output impedance Zo of the pulse generator. C L = Load capacitance including jig and probe capacitance. Table 9. Test data

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 02 — 24 January 2008 13 of 18 NXP Semiconductors 74AHC574; 74AHCT574 Octal D-type flip-flop; positive edge-trigger; 3-state 11. Package outline Fig 11. Package outline SOT163-1 (SO20) UNIT A max. A 1 A 2 A 3 bp cD (1) E (1) (1)eH E LL p Q Zywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches 2.65 0.3 0.1 2.45 2.25 0.49 0.36 0.32 0.23 13.0 12.6 7.6 7.4 1.27 10.65 10.00 1.1 1.0 0.9 0.4 8 o o 0.25 0.1 DIMENSIONS (inch dimensions are derived from the original mm dimensions) Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.1 0.4 SOT163-1 w M bp detail X Z e D y 0.25 075E04 MS-013 pin 1 index 0.1 0.012 0.004 0.096 0.089 0.019 0.014 0.013 0.009 0.51 0.49 0.30 0.29 0.05 1.4 0.0550.419 0.394 0.043 0.039 0.035 0.0160.01 0.25 0.01 0.0040.043 0.0160.01 0 5 10 mm scale X q AA 1 A 2 H E Lp Q E c L v M A (A )3 A SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1 99-12-27 03-02-19

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 02 — 24 January 2008 14 of 18 NXP Semiconductors 74AHC574; 74AHCT574 Octal D-type flip-flop; positive edge-trigger; 3-state Fig 12. Package outline SOT360-1 (TSSOP20) UNIT A 1 A 2 A 3 bp cD (1) E (2) (1)eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 6.6 6.4 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.5 0.2 o o0.13 0.10.21 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 SOT360-1 MO-153 99-12-27 03-02-19 w M bp D Z e 0.25 11 0 20 11 pin 1 index q AA 1 A 2 Lp Q detail X L (A )3 H E E c v M A XA y 0 2.5 5 mm scale TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1 A max. 1.1

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 02 — 24 January 2008 15 of 18 NXP Semiconductors 74AHC574; 74AHCT574 Octal D-type flip-flop; positive edge-trigger; 3-state Fig 13. Package outline SOT764-1 (DHVQFN20) terminal 1 index area 0.51 A 1 EhbUNIT ye 0.2 c REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 4.6 4.4 D h 3.15 2.85 2.6 2.4 1.15 0.85 3.50.30 0.18 0.05 0.00 0.05 0.1 DIMENSIONS (mm are the original dimensions) 0.5 0.3 L 0.1 v 0.05 w 0 2.5 5 mm scale SOT764-1 DHVQFN20: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 20 terminals; body 2.5 x 4.5 x 0.85 mm A (1) max. A c detail X yy1 Ce L Eh D h e b 19 12 101 X D E C B A terminal 1 index area AC C Bv M w M E (1) Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. D (1) 02-10-17 03-01-27

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved. Table 10. Abbreviations Table 11. Revision history

  • The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors.
  • Legal texts have been adapted to the new company name where appropriate.
  • Section3: DHVQFN20 package added.
  • Section7: derating values added for DHVQFN20 package.
  • Section11: outline drawing added for DHVQFN20 package. 74AHC_AHCT574_1 19990616 Product specification - -

74AHC_AHCT574_2 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 02 — 24 January 2008 17 of 18 NXP Semiconductors 74AHC574; 74AHCT574 Octal D-type flip-flop; positive edge-trigger; 3-state 14. Legal information

14.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.

14.2 Definitions

Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.

14.3 Disclaimers

General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use —NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale —NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.

14.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 15. Contact information For more information, please visit:http://www.nxp.com For sales office addresses, please send an email to:salesaddresses@nxp.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.

NXP Semiconductors 74AHC574; 74AHCT574 Octal D-type flip-flop; positive edge-trigger; 3-state © NXP B.V. 2008. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 24 January 2008 Document identifier: 74AHC_AHCT574_2 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 16. Contents