74AHC573_03 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 23

Technical content

Product specification Supersedes data of 1999 Sep 27

2003 Dec 08

74AHC573; 74AHCT573 Octal D-type transparent latch; 3-state

2003 Dec 08 2

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573

FEATURES

  • ESD protection: HBM EIA/JESD22-A114-A exceeds 2000 V MM EIA/JESD22-A115-A exceeds 200 V.
  • Balanced propagation delays
  • All inputs have Schmitt-trigger actions
  • Common 3-state output enable input
  • Functionally identical to the 74AHC/AHCT563 and 74AHC/AHCT373
  • Inputs accepts voltages higher than V CC
  • For AHC only: operates with CMOS input levels
  • For AHCT only: operates with TTL input levels
  • Specified from−40 to +85°C and −40 to +125°C.

DESCRIPTION

The 74AHC/AHCT573 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard No. 7A. The 74AHC/AHCT573 are octal D-type transparent latches featuring separate D-type inputs for each latch and 3-state outputs for bus oriented applications. A Latch Enable (LE) input and an Output Enable ( OE) input are common to all latches. The 74AHC/AHCT573 consists of eight D-type transparent latches with 3-state true outputs. When pin LE is HIGH, data at the Dn inputs enters the latches. In this condition the latches are transparent, i.e. a latch output will change state each time its corresponding D-input changes. When pin LE is LOW the latches store the information that was present at the D-inputs a set-up time preceding the HIGH-to-LOW transition of LE. When pin OE is LOW, the contents of the 8 latches are available at the outputs. When pin OE is HIGH, the outputs go to the high-impedance OFF-state. Operation of theOE input does not affect the state of the latches. The 74AHC/AHCT573 is functionally identical to the 74AHC/AHCT533, 74AHC/AHCT563 and 74AHC/AHCT373, but the 74AHC/AHCT533 and 74AHC/AHCT563 have inverted outputs and the 74AHC/AHCT563 and 74AHC/AHCT373 have a different pin arrangement. QUICK REFERENCE DATA GND = 0 V; T amb =2 5°C; tr =tf≤ 3.0 ns. Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW). PD =C PD × VCC 2 × fi× N+ Σ(CL × VCC 2 × fo) where: fi= input frequency in MHz; fo = output frequency in MHz; C L = output load capacitance in pF; VCC = supply voltage in Volts; N = total load switching outputs; Σ(C L × VCC 2 × fo) = sum of the outputs. 2. The condition is VI= GND to VCC . SYMBOL PARAMETER CONDITIONS TYPICAL UNIT AHC AHCT tPHL /tPLH propagation delay Dn to Qn; LE to Qn C L = 15 pF; VCC = 5 V 3.9 3.5 ns C I input capacitance V I=V CC or GND 3.0 3.0 pF C O output capacitance 4.0 4.0 pF C PD power dissipation capacitance C L = 50 pF; f = 1 MHz; notes 1 and 2 12 18 pF

2003 Dec 08 3

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 FUNCTION TABLE See note 1. Note 1. H = HIGH voltage level; h = HIGH voltage level one set-up time prior to the HIGH-to-LOW LE transition; L = LOW voltage level; I = LOW voltage level one set-up time prior to the HIGH-to-LOW LE transition; Z = high-impedance OFF-state.

ORDERING INFORMATION

(transparent mode) LHLLL LHHHH Latch and read register L L I L L LLhH H Latch register and disable outputs HL l LZ HLhHZ TYPE NUMBER PACKAGE PINS PACKAGE MATERIAL CODE 74AHC573D 20 SO20 plastic SOT163-1 74AHCT573D 20 SO20 plastic SOT163-1 74AHC573PW 20 TSSOP20 plastic SOT360-1 74AHCT573PW 20 TSSOP20 plastic SOT360-1

2003 Dec 08 4

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 PINNING PIN SYMBOL DESCRIPTION

1 OE 3-state output enable input (active

LOW)

2 D0 data input

3 D1 data input

4 D2 data input

5 D3 data input

6 D4 data input

7 D5 data input

8 D6 data input

9 D7 data input

10 GND ground (0 V)

11 LE latch enable input (active HIGH)

12 Q7 3-state latch output

13 Q6 3-state latch output

14 Q5 3-state latch output

15 Q4 3-state latch output

16 Q3 3-state latch output

17 Q2 3-state latch output

18 Q1 3-state latch output

19 Q0 3-state latch output

Fig.1 Pin configuration SO20 and TSSSOP20. handbook, halfpage OE GND VCC LE 10 11 573 MNA388 Fig.2 Logic symbol. handbook, halfpage MNA389 OE LE Fi 3 L i di Fig.3 IEC logic symbol. handbook, halfpage MNA390 11 C1 1 EN 1D 19

2003 Dec 08 5

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 Fig.4 Functional diagram. handbook, halfpage MNA391 3-STATE OUTPUTS LATCH 1 to 8 19D0 LE OE MNA392 D LATCH Q LE LE D LATCH Q D LATCH Q D LATCH Q D LATCH Q D LATCH Q D LATCH Q D LATCH Q OE LE LE LE LE LE LE LE Fig.5 Logic diagram.

2003 Dec 08 6

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 RECOMMENDED OPERATING CONDITIONS LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V). Notes 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. For SO20packages: above 70°C the value of P totderates linearly with 8 mW/K. For TSSOP20 packages: above 60°C the value of Ptotderates linearly with 5.5 mW/K. SYMBOL PARAMETER CONDITIONS 74AHC 74AHCT UNIT VI input voltage 0 − 5.5 0 − 5.5 V VO output voltage 0 − VCC 0 − VCC V Tamb operating ambient temperature see DC and AC characteristics per device −40 +25 +125 −40 +25 +125 °C tr,tf input rise and fall rates VCC = 3.3 V±0.3 V −− 100 −−− ns/V VCC =5V ±0.5 V −− 20 −− 20 ns/V SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC supply voltage −0.5 +7.0 V VI input voltage −0.5 +7.0 V IIK input diode current V I< −0.5 V; note 1 −− 20 mA IOK output diode current V O < −0.5 V or VO >V CC + 0.5 V; note 1 −± 20 mA IO output source or sink current −0 . 5V<VO <V CC + 0.5 V −± 25 mA ICC VCC or GND current −± 75 mA Tstg storage temperature −65 +150 °C Ptot power dissipation T amb = −40 to +125°C; note 2 − 500 mW

2003 Dec 08 7

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 DC CHARACTERISTICS 74AHC type At recommended operating conditions; voltages are referenced to GND (ground = 0 V). SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) Tamb =2 5°C VIH HIGH-level input voltage 2.0 1.5 −− V 3.0 2.1 −− V 5.5 3.85 −− V VIL LOW-level input voltage 2.0 −− 0.5 V 3.0 −− 0.9 V 5.5 −− 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 2.0 − V IO = −50 µA 3.0 2.9 3.0 − V IO = −50 µA 4.5 4.4 4.5 − V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 − 0 0.1 V IO =5 0µA 3.0 − 0 0.1 V IO =5 0µA 4.5 − 0 0.1 V IO = 4.0 mA 3.0 −− 0.36 V IO = 8.0 mA 4.5 −− 0.36 V ILI input leakage current VI=V CC or GND 5.5 −− 0.1 µA IOZ 3-state output OFF current VI=V IH or VIL; VO =V CC or GND 5.5 −−± 0.25 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 4.0 µA C I input capacitance −− 31 0 p F

2003 Dec 08 8

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 Tamb = −40 to +85°C VIH HIGH-level input voltage 2.0 1.5 −− V 3.0 2.1 −− V 5.5 3.85 −− V VIL LOW-level input voltage 2.0 −− 0.5 V 3.0 −− 0.9 V 5.5 −− 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 −− V IO = −50 µA 3.0 2.9 −− V IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 −− 0.1 V IO =5 0µA 3.0 −− 0.1 V IO =5 0µA 4.5 −− 0.1 V IO = 4.0 mA 3.0 −− 0.44 V IO = 8.0 mA 4.5 −− 0.44 V ILI input leakage current VI=V CC or GND 5.5 −− 1.0 µA IOZ 3-state output OFF current VI=V IH or VIL; VO =V CC or GND 5.5 −−± 2.5 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 40 µA C I input capacitance −− − 10 pF SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)

2003 Dec 08 9

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 Tamb = −40 to +125°C VIH HIGH-level input voltage 2.0 1.5 −− V 3.0 2.1 −− V 5.5 3.85 −− V VIL LOW-level input voltage 2.0 −− 0.5 V 3.0 −− 0.9 V 5.5 −− 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 1.9 − V IO = −50 µA 3.0 2.9 2.9 − V IO = −50 µA 4.5 4.4 4.4 − V IO = −4.0 mA 3.0 2.48 2.48 − V IO = −8.0 mA 4.5 3.8 3.8 − V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 −−− V IO =5 0µA 3.0 −− 0.1 V IO =5 0µA 4.5 −− 0.1 V IO = 4.0 mA 3.0 −− 0.1 V IO = 8.0 mA 4.5 −− 0.44 V ILI input leakage current VI=V CC or GND 5.5 −− 2.0 µA IOZ 3-state output OFF current VI=V IH or VIL; VO =V CC or GND 5.5 −−± 10.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 80 µA C I input capacitance −− − 10 pF SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)

2003 Dec 08 10

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 74AHCT type At recommended operating conditions; voltages are referenced to GND (ground = 0 V). SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) Tamb =2 5°C VIH HIGH-level input voltage 4.5 to 5.5 2.0 −− V VIL LOW-level input voltage 4.5 to 5.5 −− 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 4.5 − V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 − 0 0.1 V IO = 8.0 mA 4.5 −− 0.36 V ILI input leakage current VI=V IH or VIL 5.5 −− 0.1 µA IOZ 3-state output OFF current VI=V IH or VIL; VO =V CC or GND per input pin; other inputs at V CC or GND; IO =0 5.5 −− ± 0.25 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 4.0 µA ΔICC additional quiescent supply current per input pin V I=V CC − 2.1 V; other inputs at VCC or GND; IO =0 4.5 to 5.5 −− 1.35 mA C I input capacitance −− 31 0 p F Tamb = −40 to +85°C VIH HIGH-level input voltage 4.5 to 5.5 2.0 −− V VIL LOW-level input voltage 4.5 to 5.5 −− 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 −− 0.1 V IO = 8.0 mA 4.5 −− 0.44 V ILI input leakage current VI=V IH or VIL 5.5 −− 1.0 µA IOZ 3-state output OFF current VI=V IH or VIL; VO =V CC or GND per input pin; other inputs at V CC or GND; IO =0 5.5 −− ± 2.5 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 40 µA ΔICC additional quiescent supply current per input pin V I=V CC − 2.1 V; other inputs at VCC or GND; IO =0 4.5 to 5.5 −− 1.5 mA C I input capacitance −− − 10 pF

2003 Dec 08 11

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 Tamb = −40 to +125°C VIH HIGH-level input voltage 4.5 to 5.5 2.0 −− V VIL LOW-level input voltage 4.5 to 5.5 −− 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 −− 0.1 V IO = 8.0 mA 4.5 −− 0.55 V ILI input leakage current VI=V IH or VIL 5.5 −− 2.0 µA IOZ 3-state output OFF current VI=V IH or VIL; VO =V CC or GND per input pin; other inputs at V CC or GND; IO =0 5.5 −− ± 10.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 80 µA ΔICC additional quiescent supply current per input pin V I=V CC − 2.1 V; other inputs at VCC or GND; IO =0 4.5 to 5.5 −− 1.5 mA C I input capacitance −− − 10 pF SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)

2003 Dec 08 12

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 AC CHARACTERISTICS 74AHC573 GND = 0 V; tr =tf≤ 3.0 ns. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF) VCC = 3.0 to 3.6 V Tamb =2 5°C; note 1 tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 15 − 5.5 11.0 ns propagation delay LE to Qn see Figs 7 and 10 15 − 5.8 11.9 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 15 − 5.8 11.5 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 15 − 6.8 11.0 ns tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 50 − 7.8 14.5 ns propagation delay LE to Qn see Figs 7 and 10 50 − 8.3 15.4 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 50 − 8.3 15.0 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 50 − 9.7 14.5 ns tW enable pulse width HIGH see Figs 7 and 10 50 5.0 −− ns tsu set-up time Dn to LE see Fig.8 50 3.5 −− ns th hold time Dn to LE see Fig.8 50 1.5 −− ns Tamb = −40 to +85°C tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 15 1.0 − 13.0 ns propagation delay LE to Qn see Figs 7 and 10 15 1.0 − 14.0 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 15 1.0 − 13.5 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 15 1.0 − 13.0 ns tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 50 1.0 − 16.5 ns propagation delay LE to Qn see Figs 7 and 10 50 1.0 − 17.5 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 50 1.0 − 17.0 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 50 1.0 − 16.5 ns tW enable pulse width HIGH see Figs 7 and 10 50 5.0 −− ns tsu set-up time Dn to LE see Fig.8 50 3.5 −− ns th hold time Dn to LE see Fig.8 50 1.5 −− ns

2003 Dec 08 13

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 Tamb = −40 to +125°C tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 15 1.0 − 14.0 ns propagation delay LE to Qn see Figs 7 and 10 15 1.0 − 15.0 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 15 1.0 − 14.5 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 15 1.0 − 14.0 ns tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 50 1.0 − 18.5 ns propagation delay LE to Qn see Figs 7 and 10 50 1.0 − 19.5 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 50 1.0 − 19.0 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 50 1.0 − 18.5 ns tW enable pulse width HIGH see Figs 7 and 10 50 5.0 −− ns tsu set-up time Dn to LE see Fig.8 50 3.5 −− ns th hold time Dn to LE see Fig.8 50 1.5 −− ns VCC = 4.5 to 5.5 V Tamb =2 5°C; note 2 tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 15 − 3.9 6.8 ns propagation delay LE to Qn see Figs 7 and 10 15 − 4.2 7.7 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 15 − 4.4 7.7 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 15 − 4.6 7.7 ns tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 50 − 5.5 8.8 ns propagation delay LE to Qn see Figs 7 and 10 50 − 5.9 9.7 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 50 − 6.3 9.7 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 50 − 7.4 9.7 ns tW enable pulse width HIGH see Figs 7 and 10 50 5.0 −− ns tsu set-up time Dn to LE see Fig.8 50 3.5 −− ns th hold time Dn to LE see Fig.8 50 1.5 −− ns Tamb = −40 to +85°C tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 15 1.0 − 8.0 ns propagation delay LE to Qn see Figs 7 and 10 15 1.0 − 9.0 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 15 1.0 − 9.0 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 15 1.0 − 9.0 ns tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 50 1.0 − 10.0 ns propagation delay LE to Qn see Figs 7 and 10 50 1.0 − 11.0 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 50 1.0 − 11.0 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 50 1.0 − 11.0 ns tW enable pulse width HIGH see Figs 7 and 10 50 5.0 −− ns tsu set-up time Dn to LE see Fig.8 50 3.5 −− ns th hold time Dn to LE see Fig.8 50 1.5 −− ns SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF)

2003 Dec 08 14

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 Notes 1. Typical values at VCC = 3.3 V. 2. Typical values at VCC = 5.0 V. Tamb = −40 to +125°C tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 15 1.0 − 8.5 ns propagation delay LE to Qn see Figs 7 and 10 15 1.0 − 10.0 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 15 1.0 − 10.0 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 15 1.0 − 10.0 ns tPHL /tPLH propagation delay Dn to Qn2 see Figs 6 and 10 50 1.0 − 11.0 ns propagation delay LE to Qn see Figs 7 and 10 50 1.0 − 12.5 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 50 1.0 − 12.5 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 50 1.0 − 12.5 ns tW enable pulse width HIGH see Figs 7 and 10 50 5.0 −− ns tsu set-up time Dn to LE see Fig.8 50 3.5 −− ns th hold time Dn to LE see Fig.8 50 1.5 −− ns SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF)

2003 Dec 08 15

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 74AHCT573 GND = 0 V; tr =tf≤ 3.0 ns. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF) VCC = 4.5 to 5.5 V;note 1 Tamb =2 5°C tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 15 − 3.5 5.5 ns propagation delay LE to Qn see Figs 7 and 10 15 − 3.9 6.0 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 15 − 4.1 6.5 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 15 − 4.5 6.5 ns tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 50 − 4.9 7.5 ns propagation delay LE to Qn see Figs 7 and 10 50 − 5.5 8.5 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 50 − 5.9 8.5 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 50 − 6.4 9.0 ns tW enable pulse width HIGH see Figs 7 and 9 50 5.0 −− ns tsu set-up time Dn to LE see Fig.8 50 3.5 −− ns th hold time Dn to LE see Fig.8 50 1.5 −− ns Tamb = −40 to +85°C tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 15 1 − 6.5 ns propagation delay LE to Qn see Figs 7 and 10 15 1 − 7.0 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 15 1 − 7.5 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 15 1 − 7.5 ns tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 50 1 − 8.5 ns propagation delay LE to Qn see Figs 7 and 10 50 1 − 9.5 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 50 1 − 10.0 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 50 1 − 10.0 ns tW enable pulse width HIGH see Figs 7 and 9 50 5.0 −− ns tsu set-up time Dn to LE see Fig.8 50 3.5 −− ns th hold time Dn to LE see Fig.8 50 1.5 −− ns

2003 Dec 08 16

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 Note 1. Typical values at VCC = 5.0 V. Tamb = −40 to +125°C tPHL /tPLH propagation delay Dn to Qn see Figs 6 and 10 15 1 − 7.0 ns propagation delay LE to Qn see Figs 7 and 10 15 1 − 7.5 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 15 1 − 8.5 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 15 1 − 8.5 ns tPHL /tPLH propagation delay Don to Qn see Figs 6 and 10 50 1 − 9.5 ns propagation delay LE to Qn see Figs 7 and 10 50 1 − 11.0 ns tPZH /tPZL propagation delayOE to Qn see Figs 9 and 10 50 1 − 11.0 ns tPHZ /tPLZ propagation delayOE to Qn see Figs 9 and 10 50 1 − 11.5 ns tW enable pulse width HIGH see Figs 7 and 9 50 5.0 −− ns tsu set-up time Dn to LE see Fig.8 50 3.5 −− ns th hold time Dn to LE see Fig.8 50 1.5 −− ns SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF)

2003 Dec 08 17

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 AC WAVEFORMS Fig.6 The data input (Dn) to output (Qn) propagation delays. handbook, halfpage MNA811 Dn input Qn output tPHL tPLH GND VI VM VM VOH VOL FAMILY VI INPUT REQUIREMENTS VM INPUT VM OUTPUT AHC GND to V CC 50% V CC 50% V CC AHCT GND to 3.0 V 1.5 V 50% V CC Fig.7 The latch enable input (LE) pulse width, the latch enable input to output (Qn) propagation delays. handbook, full pagewidth MNA812 LE input Qn output tPHL tPLH tW 1/fmax VM VOH VI GND VOL VM FAMILY VI INPUT REQUIREMENTS VM INPUT VM OUTPUT AHC GND to V CC 50% V CC 50% V CC AHCT GND to 3.0 V 1.5 V 50% V CC

2003 Dec 08 18

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 Fig.8 Data set-up and hold times for the Dn input to the LE input. FAMILY VI INPUT REQUIREMENTS VM INPUT AHC GND to V CC 50% V CC AHCT GND to 3.0 V 1.5 V handbook, full pagewidth MNA814 th tsu th tsu VM VM VI GND VI GND LE input Dn input The shaded areas indicate when the input is permitted to change for predictable output performance. Fig.9 The 3-state enable and disable times. handbook, full pagewidth MNA450 tPLZ tPHZ outputs disabled outputs enabled VOH − 0.3 V VOL + 0.3 V outputs enabled output LOW-to-OFF OFF-to-LOW output HIGH-to-OFF OFF-to-HIGH OE input VI VCC VM (1) VOL VOH GND GND tPZL tPZH VM (2) VM (2) FAMILY VI INPUT REQUIREMENTS VM (1) INPUT VM (2) OUTPUT AHC GND to V CC 50% V CC 50% V CC AHCT GND to 3.0 V 1.5 V 50% V CC

2003 Dec 08 19

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 Fig.10 Load circuitry for switching times. TEST S1 tPLH /tPHL open tPLZ /tPZL VCC tPHZ /tPZH GND handbook, full pagewidth open GND VCC VCC VI VO MNA183 D.U.T. C LR T R L = 1 kΩ PULSE GENERATOR Definitions for test circuit: R L = Load resistor. C L = Load capacitance including jig and probe capacitance. R T = Termination resistance should be equal to the output impedance Zo of the pulse generator.

2003 Dec 08 20

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 PACKAGE OUTLINES UNIT A max. A 1 A 2 A 3 bp cD (1) E (1) (1)eH E LL p Q Zywv θ REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches 2.65 0.3 0.1 2.45 2.25 0.49 0.36 0.32 0.23 13.0 12.6 7.6 7.4 1.27 10.65 10.00 1.1 1.0 0.9 0.4 8 o o 0.25 0.1 DIMENSIONS (inch dimensions are derived from the original mm dimensions) Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.1 0.4 SOT163-1 w M bp detail X Z e D y 0.25 075E04 MS-013 pin 1 index 0.1 0.012 0.004 0.096 0.089 0.019 0.014 0.013 0.009 0.51 0.49 0.30 0.29 0.05 1.4 0.0550.419 0.394 0.043 0.039 0.035 0.0160.01 0.25 0.01 0.0040.043 0.0160.01 0 5 10 mm scale X θ AA 1 A 2 H E Lp Q E c L v M A (A )3 A SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1 99-12-27 03-02-19

2003 Dec 08 21

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 UNIT A 1 A 2 A 3 bp cD (1) E (2) (1)eH E LL p QZ ywv θ REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 6.6 6.4 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.5 0.2 o o0.13 0.10.21 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 SOT360-1 MO-153 99-12-27 03-02-19 w M bp D Z e 0.25 11 0 20 11 pin 1 index θ AA 1 A 2 Lp Q detail X L (A )3 H E E c v M A XA y 0 2.5 5 mm scale TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1 A max. 1.1

2003 Dec 08 22

Philips Semiconductors Product specification Octal D-type transparent latch; 3-state 74AHC573; 74AHCT573 DATA SHEET STATUS Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. LEVEL DATA SHEET STATUS (1) PRODUCT STATUS (2)(3) DEFINITION I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.

© Koninklijke Philips Electronics N.V. 2003 SCA75 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 Printed in The Netherlands R44/02/pp23 Date of release:2003 Dec 08 Document order number: 9397 750 12156