74AHC3G14 NXP
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 16
Technical content
- General description 74AHC3G14 and 74AHCT3G14 are high-speed Si-gate CMOS devices. They provide an inverting buffer function with Schmitt trigger action. These devices are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. The AHC device has CMOS input switching levels and supply voltage range 2 V to 5.5 V. The AHCT device has TTL input switching levels and supply voltage range 4.5 V to 5.5 V. 2. Features n Symmetrical output impedance n High noise immunity n ESD protection: u HBM JESD22-A114E exceeds 2000 V u MM JESD22-A115-A exceeds 200 V u CDM JESD22-C101C exceeds 1000 V n Low power dissipation n Balanced propagation delays n Multiple package options n Specified from−40 °C to +125°C 3. Applications n Wave and pulse shaper for highly noisy environment n Astable multivibrator n Monostable multivibrator 74AHC3G14; 74AHCT3G14 Inverting Schmitt trigger Rev. 04 — 5 May 2009 Product data sheet
74AHC_AHCT3G14_4 © NXP B.V. 2009. All rights reserved. [1] The pin 1 indicator is located on the lower left corner of the device, below the marking code. Table 1. Ordering information Table 2. Marking codes
74AHC_AHCT3G14_4 © NXP B.V. 2009. All rights reserved.
7.1 Pinning
7.2 Pin description
Table 3. Pin description Table 4. Function table[1]
74AHC_AHCT3G14_4 © NXP B.V. 2009. All rights reserved. [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For TSSOP8 package: above 55°C the value of Ptot derates linearly at 2.5 mW/K. For VSSOP8 package: above 110°C the value of Ptot derates linearly at 8 mW/K. For XSON8U packages: above 118°C the value of Ptotderates linearly with 7.8 mW/K.
- Recommended operating conditions
Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Table 6. Recommended operating conditions Voltages are referenced to GND (ground = 0 V). Table 7. Static characteristics Voltages are referenced to GND (ground = 0 V).
74AHC_AHCT3G14_4 © NXP B.V. 2009. All rights reserved. Table 7. Static characteristics …continued Voltages are referenced to GND (ground = 0 V).
74AHC_AHCT3G14_4 © NXP B.V. 2009. All rights reserved.
11.1 Transfer characteristics
Table 8. Transfer characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V). SeeFigure8 andFigure9. Table 9. Dynamic characteristics GND = 0 V; tr = tf≤ 3.0 ns; for test circuit seeFigure7.
74AHC_AHCT3G14_4 © NXP B.V. 2009. All rights reserved. [1] tpd is the same as tPLH and tPHL . [2] Typical values are measured at VCC = 3.3 V. [3] Typical values are measured at VCC = 5.0 V. [4] C PD is used to determine the dynamic power dissipation PD (µW). Σ(CL × VCC 2 × fo) = sum of the outputs. Table 9. Dynamic characteristics …continued GND = 0 V; tr = tf≤ 3.0 ns; for test circuit seeFigure7. The test data is given inTable10 Test data is given inTable10. impedance Zo of the pulse generator. Table 10. Test data
74AHC_AHCT3G14_4 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 04 — 5 May 2009 8 of 16 NXP Semiconductors 74AHC3G14; 74AHCT3G14 Inverting Schmitt trigger
13.1 Transfer characteristic waveforms
Fig 8. Transfer characteristic Fig 9. The definitions of V T+, VT− and VH mna026 VO VH VI VT− VT+ mna027 VO VI VH VT+ VT− VCC = 3.0 V. V CC = 4.5 V. Fig 10. Typical 74AHC3G14 transfer characteristics Fig 11. Typical 74AHC3G14 transfer characteristics 01 3 1.5 0.5 mna401
2 VI (V)
(mA)
05 VI (V)
(mA) mna402 1234
74AHC_AHCT3G14_4 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 04 — 5 May 2009 9 of 16 NXP Semiconductors 74AHC3G14; 74AHCT3G14 Inverting Schmitt trigger 14. Application information The slow input rise and fall times cause additional power dissipation, which can be calculated using the following formula: Padd =fi× (tr ×Δ ICC(AV) +tf×Δ ICC(AV))× VCC where: Padd = additional power dissipation (µW); fi= input frequency (MHz); tr = input rise time (ns); 10 % to 90 %; VCC = 5.5 V. Fig 12. Typical 74AHC3G14 transfer characteristics 02 6 mna403
4 VI (V)
(mA) VCC = 4.5 V. V CC = 5.5 V. Fig 13. Typical 74AHCT3G14 transfer characteristics Fig 14. Typical 74AHCT3G14 transfer characteristics (mA) mna404 1234 02 6 mna405 (mA)
74AHC_AHCT3G14_4 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 04 — 5 May 2009 10 of 16 NXP Semiconductors 74AHC3G14; 74AHCT3G14 Inverting Schmitt trigger tf= input fall time (ns); 90 % to 10 %; ΔICC(AV) = average additional supply current (µA). ΔICC(AV) differs with positive or negative input transitions, as shown inFigure15 and Figure16. For 74AHC3G14 and 74AHCT3G14 used in relaxation oscillator circuit, seeFigure17. Note to the application information: 1. All values given are typical unless otherwise specified. Linear change of VI between 0.1VCC to 0.9VCC Linear change of VI between 0.1VCC to 0.9VCC Fig 15. Average additional ICC for 74AHC3G14 Schmitt trigger devices Fig 16. Average additional ICC for 74AHCT3G14 Schmitt trigger devices mna036 0 2.0 4.0 6.0 VCC (V) 200 150 100 Δ ICC(AV) (µA) positive-going edge negative-going edge mna058 04 6 2 VCC (V) 200 100 150 Δ ICC(AV) (µA) positive-going edge negative-going edge For 74AHC3G14: For 74AHCT3G14: Fig 17. Relaxation oscillator using the 74AHC3G14 and 74AHCT3G14 mna035 R C f 1 T--- 1 f 1 T--- 1
74AHC_AHCT3G14_4 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 04 — 5 May 2009 11 of 16 NXP Semiconductors 74AHC3G14; 74AHCT3G14 Inverting Schmitt trigger 15. Package outline Fig 18. Package outline SOT505-2 (TSSOP8) UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(1) Z(1) q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.00 0.95 0.75 0.38 0.22 0.18 0.08 3.1 2.9 3.1 2.9 0.65 4.1 3.9 0.70 0.35 0°0.13 0.10.20.5 DIMENSIONS (mm are the original dimensions) Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 0.47 0.33 w Mbp D Z e 0.25 8 5 q Lp (A3) detail X A L H E E c v M A XA y 2.5 5 mm0 scale TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mmSOT505-2 1.1 pin 1 index
74AHC_AHCT3G14_4 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 04 — 5 May 2009 12 of 16 NXP Semiconductors 74AHC3G14; 74AHCT3G14 Inverting Schmitt trigger Fig 19. Package outline SOT765-1 (VSSOP8) UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(2) Z(1) q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.00 0.85 0.60 0.27 0.17 0.23 0.08 2.1 1.9 2.4 2.2 0.5 3.2 3.0 0.4 0.1 0°0.13 0.10.20.4 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. 0.40 0.15 Q 0.21 0.19 SOT765-1 MO-187 02-06-07 w Mbp D Z e 0.12 8 5 q Q Lp (A3) detail X A L H E E c v M A X A y 2.5 5 mm0 scale VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1 pin 1 index
74AHC_AHCT3G14_4 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 04 — 5 May 2009 13 of 16 NXP Semiconductors 74AHC3G14; 74AHCT3G14 Inverting Schmitt trigger Fig 20. Package outline SOT996-2 (XSON8U) REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT996-2 07-12-18 07-12-21 UNIT A max mm 0.5 0.05 0.00 0.35 0.15 3.1 2.9 0.5 1.5 0.5 0.3 0.6 0.4 0.1 0.05 A 1 DIMENSIONS (mm are the original dimensions) XSON8U: plastic extremely thin small outline package; no leads; 8 terminals; UTLP based; body 3 x 2 x 0.5 mm 0 1 2 mm scale b D 2.1 1.9 E e e1 L L1 0.15 0.05 L2 v w 0.05 y y1 0.1 C yCy1 X b e AC Bv M Cw M L terminal 1 index area B AD E detail X A A1
74AHC_AHCT3G14_4 © NXP B.V. 2009. All rights reserved. Table 11. Abbreviations Table 12. Revision history
- Table7: the conditions for HIGH-level output voltage and LOW-level output voltage have been changed. 74AHC_AHCT3G14_3 20080617 Product data sheet - 74AHC_AHCT3G14_2 74AHC_AHCT3G14_2 20041018 Product specification - 74AHC_AHCT3G14_1 74AHC_AHCT3G14_1 20031127 Product specification - -
74AHC_AHCT3G14_4 © NXP B.V. 2009. All rights reserved. Product data sheet Rev. 04 — 5 May 2009 15 of 16 NXP Semiconductors 74AHC3G14; 74AHCT3G14 Inverting Schmitt trigger 18. Legal information
18.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
18.2 Definitions
Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.
18.3 Disclaimers
General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use —NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale —NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control —This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities.
18.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 19. Contact information For more information, please visit:http://www.nxp.com For sales office addresses, please send an email to:salesaddresses@nxp.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
NXP Semiconductors 74AHC3G14; 74AHCT3G14 Inverting Schmitt trigger © NXP B.V. 2009. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 5 May 2009 Document identifier: 74AHC_AHCT3G14_4 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 20. Contents