74AHC3G14 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 21

Technical content

Product specification Supersedes data of 2003 Nov 27

2004 Oct 18

74AHC3G14; 74AHCT3G14 Inverting Schmitt trigger

2004 Oct 18 2

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14

FEATURES

  • Symmetrical output impedance
  • High noise immunity
  • ESD protection: – HBM EIA/JESD22-A114-B exceeds 2000 V – MM EIA/JESD22-A115-A exceeds 200 V – CDM EIA/JESD22-C101 exceeds 500 V.
  • Low power dissipation
  • Balanced propagation delays
  • Multiple package options
  • Specified from−40 °C to +85°C and−40 °C to +125°C.

APPLICATIONS

  • Wave and pulse shapers
  • Astable multivibrators
  • Monostable multivibrators.

DESCRIPTION

The 74AHC3G/AHCT3G14 is a high-speed Si-gate CMOS device. The 74AHC3G/AHCT3G14 provides three inverting buffers with Schmitt-trigger action. These devices are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. QUICK REFERENCE DATA GND = 0 V; T amb =2 5°C; tr =tf≤ 3.0 ns. Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW). PD =C PD × VCC 2 × fi× N+ Σ(CL × VCC 2 × fo) where: fi= input frequency in MHz; fo = output frequency in MHz; C L = output load capacitance in pF; VCC = supply voltage in Volts; N = number of inputs switching; Σ(C L × VCC 2 × fo) = sum of the outputs. 2. The condition is VI= GND to VCC . FUNCTION TABLE See note 1. Note 1. H = HIGH voltage level; L = LOW voltage level. SYMBOL PARAMETER CONDITIONS TYPICAL UNIT AHC3G14 AHCT3G14 tPHL /tPLH propagation delay A to Y C L = 15 pF; VCC = 5 V 3.2 4.1 ns C I input capacitance 1.5 1.5 pF C PD power dissipation capacitance CL = 15 pF; f = 1 MHz; notes 1 and 2 10 12 pF INPUT OUTPUT nA nY LH HL

2004 Oct 18 3

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14

ORDERING INFORMATION

RANGE PINS PACKAGE MATERIAL CODE MARKING 74AHC3G14DP −40 °C to +125°C 8 TSSOP8 plastic SOT505-2 A14 74AHCT3G14DP −40 °C to +125°C 8 TSSOP8 plastic SOT505-2 C14 74AHC3G14DC −40 °C to +125°C 8 VSSOP8 plastic SOT765-1 A14 74AHCT3G14DC −40 °C to +125°C 8 VSSOP8 plastic SOT765-1 C14 74AHC3G14GM −40 °C to +125°C 8 XSON8 plastic SOT833-1 A14 74AHCT3G14GM −40 °C to +125°C 8 XSON8 plastic SOT833-1 C14 PIN SYMBOL DESCRIPTION 1 1A data input 2 3Y data output 3 2A data input

4 GND ground (0 V)

Fig.1 Pin configuration TSSOP8 and VSSOP8. 3G14 V CC GND 001aab834 Transparent top view Fig.2 Pin configuration XSON8.

2004 Oct 18 4

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 handbook, halfpage MNA740 1A 1Y17 3Y 3A26 2A 2Y35 Fig.3 Logic symbol. handbook, halfpage MNA741 Fig.4 IEC logic symbol. Fig.5 Logic diagram (one driver). handbook, halfpage MNA025 A Y

2004 Oct 18 5

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 RECOMMENDED OPERATING CONDITIONS LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V). Note 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. SYMBOL PARAMETER CONDITIONS 74AHC3G 74AHCT3G UNIT VI input voltage 0 − 5.5 0 − 5.5 V VO output voltage 0 − VCC 0 − VCC V Tamb operating ambient temperature see DC and AC characteristics per device −40 +25 +125 −40 +25 +125 °C SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT V CC supply voltage −0.5 +7.0 V VI input voltage −0.5 +7.0 V IIK input diode current V I< −0.5 V −− 20 mA IOK output diode current V O < −0.5 V or VO >V CC + 0.5 V; note 1−± 20 mA IO output source or sink current−0 . 5V<VO <V CC + 0.5 V −± 25 mA ICC , IGND VCC or GND current −± 75 mA Tstg storage temperature −65 +150 °C PD power dissipation T amb = −40 °C to +125°C − 250 mW

2004 Oct 18 6

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 DC CHARACTERISTICS Type 74AHC3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) Tamb =2 5°C VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 2.0 − V IO = −50 µA 3.0 2.9 3.0 − V IO = −50 µA 4.5 4.4 4.5 − V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 − 0 0.1 V IO =5 0µA 3.0 − 0 0.1 V IO =5 0µA 4.5 − 0 0.1 V IO = 4.0 mA 3.0 −− 0.36 V IO = 8.0 mA 4.5 −− 0.36 V ILI input leakage current VI=V CC or GND 5.5 −− 0.1 µA ICC quiescent supply current VI=V CC or GND; IO = 0 A 5.5 −− 1.0 µA C I input capacitance −− 1.5 10 pF Tamb = −40 °C to +85°C VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 −− V IO = −50 µA 3.0 2.9 −− V IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 −− 0.1 V IO =5 0µA 3.0 −− 0.1 V IO =5 0µA 4.5 −− 0.1 V IO = 4.0 mA 3.0 −− 0.44 V IO = 8.0 mA 4.5 −− 0.44 V ILI input leakage current VI=V CC or GND 5.5 −− 1.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 A 5.5 −− 10 µA C I input capacitance −− − 10 pF

2004 Oct 18 7

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 Tamb = −40 °C to +125°C VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 −− V IO = −50 µA 3.0 2.9 −− V IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 −− 0.1 V IO =5 0µA 3.0 −− 0.1 V IO =5 0µA 4.5 −− 0.1 V IO = 4.0 mA 3.0 −− 0.55 V IO = 8.0 mA 4.5 −− 0.55 V ILI input leakage current VI=V CC or GND 5.5 −− 2.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 A 5.5 −− 40 µA C I input capacitance −− − 10 pF SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)

2004 Oct 18 8

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 Type 74AHCT3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) Tamb =2 5°C VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 4.5 − V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 − 0 0.1 V IO = 8.0 mA 4.5 −− 0.36 V ILI input leakage current V I=V IH or VIL 5.5 −− 0.1 µA ICC quiescent supply current VI=V CC or GND; IO = 0 A 5.5 −− 1.0 µA ΔICC additional quiescent supply current per input pin VI= 3.4 V; other inputs at VCC or GND; IO =0A 5.5 −− 1.35 mA C I input capacitance −− 1.5 10 pF Tamb = −40 °C to +85°C VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 −− 0.1 V IO = 8.0 mA 4.5 −− 0.44 V ILI input leakage current V I=V IH or VIL 5.5 −− 1.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 A 5.5 −− 10 µA ΔICC additional quiescent supply current per input pin VI= 3.4 V; other inputs at VCC or GND; IO =0A 5.5 −− 1.5 mA C I input capacitance −− − 10 pF Tamb = −40 °C to +125°C VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 −− 0.1 V IO = 8.0 mA 4.5 −− 0.55 V ILI input leakage current V I=V IH or VIL 5.5 −− 2.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 A 5.5 −− 40 µA ΔICC additional quiescent supply current per input pin VI= 3.4 V; other inputs at VCC or GND; IO =0A 5.5 −− 1.5 mA C I input capacitance −− − 10 pF

2004 Oct 18 9

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 TRANSFER CHARACTERISTICS Type 74AHC3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS V CC (V) Tamb =2 5°C VT+ positive-going threshold see Figs 6 and 7 3.0 −− 2.2 V 4.5 −− 3.15 V 5.5 −− 3.85 V VT− negative-going threshold see Figs 6 and 7 3.0 0.9 −− V 4.5 1.35 −− V 5.5 1.65 −− V VH hysteresis (VT+ − VT−) see Figs 6 and 7 3.0 0.3 − 1.2 V 4.5 0.4 − 1.4 V 5.5 0.5 − 1.6 V Tamb = −40 °C to +85°C VT+ positive-going threshold see Figs 6 and 7 3.0 −− 2.2 V 4.5 −− 3.15 V 5.5 −− 3.85 V VT− negative-going threshold see Figs 6 and 7 3.0 0.9 −− V 4.5 1.35 −− V 5.5 1.65 −− V VH hysteresis (VT+ − VT−) see Figs 6 and 7 3.0 0.3 − 1.2 V 4.5 0.4 − 1.4 V 5.5 0.5 − 1.6 V Tamb = −40 °C to +125°C VT+ positive-going threshold see Figs 6 and 7 3.0 −− 2.2 V 4.5 −− 3.15 V 5.5 −− 3.85 V VT− negative-going threshold see Figs 6 and 7 3.0 0.9 −− V 4.5 1.35 −− V 5.5 1.65 −− V VH hysteresis (VT+ − VT−) see Figs 6 and 7 3.0 0.25 − 1.2 V 4.5 0.35 − 1.4 V 5.5 0.45 − 1.6 V

2004 Oct 18 10

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 Type 74AHCT3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS V CC (V) Tamb =2 5°C VT+ positive-going threshold see Figs 6 and 7 4.5 −− 2.0 V 5.5 −− 2.0 V VT− negative-going threshold see Figs 6 and 7 4.5 0.5 −− V 5.5 0.6 −− V VH hysteresis (VT+ − VT−) see Figs 6 and 7 4.5 0.4 − 1.4 V 5.5 0.4 − 1.6 V Tamb = −40 °C to +85°C VT+ positive-going threshold see Figs 6 and 7 4.5 −− 2.0 V 5.5 −− 2.0 V VT− negative-going threshold see Figs 6 and 7 4.5 0.5 −− V 5.5 0.6 −− V VH hysteresis (VT+ − VT−) see Figs 6 and 7 4.5 0.4 − 1.4 V 5.5 0.4 − 1.6 V Tamb = −40 °C to +125°C VT+ positive-going threshold see Figs 6 and 7 4.5 −− 2.0 V 5.5 −− 2.0 V VT− negative-going threshold see Figs 6 and 7 4.5 0.5 −− V 5.5 0.6 −− V VH hysteresis (VT+ − VT−) see Figs 6 and 7 4.5 0.35 − 1.4 V 5.5 0.35 − 1.6 V

2004 Oct 18 11

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 TRANSFER CHARACTERISTIC WAVEFORMS Fig.6 Transfer characteristic. handbook, halfpage MNA026 VO VH VI VT− VT+ Fig.7 Definitions of VT+, VT− and VH . handbook, halfpage MNA027 VO VI VH VT+ VT− Fig.8 Typical AHC3G14 transfer characteristics. handbook, halfpage 01 3 1.5 0.5 MNA401

2 VI (V)

(mA) VCC = 3.0 V.

2004 Oct 18 12

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 Fig.9 Typical AHC3G14 transfer characteristics. handbook, halfpage

05 VI (V)

(mA) MNA402 1234 VCC = 4.5 V. Fig.10 Typical AHC3G14 transfer characteristics. handbook, halfpage 02 6 MNA403

4 VI (V)

(mA) VCC = 5.5 V. Fig.11 Typical AHCT3G14 transfer characteristics. handbook, halfpage (mA) MNA404 1234 VCC = 4.5 V. Fig.12 Typical AHCT3G14 transfer characteristics. handbook, halfpage 02 6 MNA405 (mA) VCC = 5.5 V.

2004 Oct 18 13

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 AC CHARACTERISTICS Type 74AHC3G14 GND = 0 V; tr =tf≤ 3.0 ns. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS V CC (V) C L (pF) Tamb =2 5°C tPHL /tPLH propagation delay nA to nY see Figs 13 and 14 3.3 15 − 4.2 − ns 50 − 6.0 − ns 3.0 to 3.6 15 −− 12.8 ns 50 −− 16.3 ns 5.0 15 − 3.2 − ns 50 − 4.6 − ns 4.5 to 5.5 15 −− 8.6 ns 50 −− 10.6 ns Tamb = −40 °C to +85°C tPHL /tPLH propagation delay nA to nY see Figs 13 and 14 3.0 to 3.6 15 1.0 − 15.0 ns 50 1.0 − 18.5 ns 4.5 to 5.5 15 1.0 − 10.0 ns 50 1.0 − 12.0 ns Tamb = −40 °C to +125°C tPHL /tPLH propagation delay nA to nY see Figs 13 and 14 3.0 to 3.6 15 1.0 − 16.5 ns 50 1.0 − 20.5 ns 4.5 to 5.5 15 1.0 − 11.0 ns 50 1.0 − 13.5 ns

2004 Oct 18 14

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 Type 74AHCT3G14 GND = 0 V; tr =tf≤ 3.0 ns. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS V CC (V) C L (pF) Tamb =2 5°C tPHL /tPLH propagation delay nA to nY see Figs 13 and 14 5 15 − 4.1 − ns 50 − 5.9 − ns 4.5 to 5.5 15 −− 7.0 ns 50 −− 8.5 ns Tamb = −40 °C to +85°C tPHL /tPLH propagation delay nA to nY see Figs 13 and 14 4.5 to 5.5 15 1.0 − 8.0 ns 50 1.0 − 10.0 ns Tamb = −40 °C to +125°C tPHL /tPLH propagation delay nA to nY see Figs 13 and 14 4.5 to 5.5 15 1.0 − 9.0 ns 50 1.0 − 11.0 ns

2004 Oct 18 15

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 AC WAVEFORMS handbook, halfpage MNA344 tPHL tPLH VM VMnA input nY output GND VI VOH VOL Fig.13 The input (nA) to output (nY) propagation delays. FAMILY VI INPUT REQUIREMENTS VM INPUT VM OUTPUT AHC3G GND to V CC 50 % VCC 50 % VCC AHCT3G GND to 3.0 V 1.5 V 50 % V CC Fig.14 Load circuitry for switching times. Definitions for test circuit: C L = Load capacitance including jig and probe capacitance. (See Chapter “AC characteristics” for values). R T = Termination resistance should be equal to the output impedance Zo of the pulse generator. handbook, halfpage VCC VI VO MNA101 D.U.T. C LR T PULSE GENERATOR

2004 Oct 18 16

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14

APPLICATION INFORMATION

The slow input rise and fall times cause additional power dissipation. This can be calculated using the following formula: P ad =fi× (tr × ICC(AV) +tf× ICC(AV))× VCC Where: Pad = additional power dissipation (µW); fi= input frequency (MHz); tr = input rise time (ns); 10 % to 90 %; tf= input fall time (ns); 90 % to 10 %; ICC(AV) = average additional supply current (µA). Average ICC differs with positive or negative input transitions, as shown in Figs 15 and 16. For AHC3G/AHCT3G14 used in relaxation oscillator circuit, see Fig.17. Remark to the application information All values given are typical unless otherwise specified. Fig.15 Average ICC for AHC3G Schmitt-trigger devices. handbook, halfpage 0 2.0 4.0 6.0 VCC (V) 200 150 100 MNA036 ICC(AV) (mA) positive-going edge negative-going edge Linear change of VI between 0.1VCC to 0.9VCC . Fig.16 Average ICC for AHCT3G Schmitt-trigger devices. handbook, halfpage 04 6 2 VCC (V) 200 100 150 MNA058 ICC(AV) (mA) positive-going edge negative-going edge Linear change of VI between 0.1VCC to 0.9VCC . Fig.17 Relaxation oscillator using the AHC3G/AHCT3G14. For AHC3G: For AHCT3G: f 1 T--- 1 f 1 T--- 1 handbook, halfpage MNA035 R C

2004 Oct 18 17

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 PACKAGE OUTLINES UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(1) Z(1) q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.00 0.95 0.75 0.38 0.22 0.18 0.08 3.1 2.9 3.1 2.9 0.65 4.1 3.9 0.70 0.35 0°0.13 0.10.20.5 DIMENSIONS (mm are the original dimensions) Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 0.47 0.33 w Mbp D Z e 0.25 8 5 q Lp (A3) detail X A L H E E c v M A XA y 2.5 5 mm0 scale TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mmSOT505-2 1.1 pin 1 index

2004 Oct 18 18

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(2) Z(1) θ REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.00 0.85 0.60 0.27 0.17 0.23 0.08 2.1 1.9 2.4 2.2 0.5 3.2 3.0 0.4 0.1 0°0.13 0.10.20.4 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. 0.40 0.15 Q 0.21 0.19 SOT765-1 MO-187 02-06-07 w Mbp D Z e 0.12 8 5 θ Q Lp (A3) detail X A L H E E c v M A X A y 2.5 5 mm0 scale VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1 pin 1 index

2004 Oct 18 19

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 terminal 1 index area REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT833-1 04-07-15 04-07-22 DIMENSIONS (mm are the original dimensions) XSON8: plastic extremely thin small outline package; no leads; 8 terminals; body 0.95 x 1.95 x 0.5 mm D E e A 1 b LL1 e1 e1 0 1 2 mm scale Notes 1. Including plating thickness. 2. Can be visible in some manufacturing processes. UNIT mm 0.25 0.17 2.0 1.9 0.35 0.27 A max b E 1.0 0.9 D ee 1 L 0.40 0.32 0.50.6 A (1) max 0.5 0.04 (2) (2) A

2004 Oct 18 20

Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 DATA SHEET STATUS Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. LEVEL DATA SHEET STATUS (1) PRODUCT STATUS (2)(3) DEFINITION I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.

© Koninklijke Philips Electronics N.V. 2004 SCA76 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 Printed in The Netherlands R44/02/pp21 Date of release:2004 Oct 18 Document order number: 9397 750 13741