74AHC3G04 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 16

Technical content

Product specification 2003 Nov 06 INTEGRATED CIRCUITS 74AHC3G04; 74AHCT3G04 Inverter

2003 Nov 06 2

Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04

FEATURES

  • Symmetrical output impedance
  • High noise immunity
  • ESD protection: – HBM EIA/JESD22-A114-A exceeds 2000 V – MM EIA/JESD22-A115-A exceeds 200 V – CDM EIA/JESD22-C101 exceeds 1000 V.
  • Low power dissipation
  • Balanced propagation delays
  • SOT505-2 and SOT765-1 package
  • Specified from−40 to +85°C and −40 to +125°C.

DESCRIPTION

The 74AHC3G04/74AHCT3G04 are high-speed Si-gate CMOS devices. The 74AHC3G04/74AHCT3G04 provides three inverting buffer. QUICK REFERENCE DATA GND = 0 V; T amb =2 5°C; tr =tf≤ 3.0 ns. Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW). PD =C PD × VCC 2 × fi× N+ ∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz; fo = output frequency in MHz; C L = output load capacitance in pF; VCC = supply voltage in Volts; N = total load switching outputs; ∑ (C L × VCC 2 × fo) = sum of outputs. 2. The condition is VI= GND to VCC . FUNCTION TABLE See note 1. Note 1. H = HIGH voltage level; L = LOW voltage level. SYMBOL PARAMETER CONDITIONS TYPICAL UNIT 74AHC3G04 74AHCT3G04 tPHL /tPLH propagation delay input A to output Y CL = 15 pF; VCC = 5 V 3.1 3.4 ns C I input capacitance 1.5 1.5 pF C PD power dissipation capacitance C L = 50 pF; f = 1 MHz; notes 1 and 2 91 0 p F INPUT OUTPUT nA nY LH HL

2003 Nov 06 3

Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 ORDERING AND PACKAGE INFORMATION PINNING TYPE NUMBER PACKAGES TEMPERATURE RANGE PINS PACKAGE MATERIAL CODE MARKING 74AHC3G04DP −40 to +125°C 8 TSSOP8 plastic SOT505-2 A04 74AHCT3G04DP −40 to +125°C 8 TSSOP8 plastic SOT505-2 C04 74AHC3G04DC −40 to +125°C 8 VSSOP8 plastic SOT765-1 A04 74AHCT3G04DC −40 to +125°C 8 VSSOP8 plastic SOT765-1 C04 PIN SYMBOL DESCRIPTION 1 1A data input 2 3Y data output 3 2A data input

4 GND ground (0 V)

handbook, halfpage MNA719 VCC 1Y3Y 2YGND Fig.1 Pin configuration. handbook, halfpage MNA720 1A 1Y17 2A 2Y35 3A 3Y62 Fig.2 Logic symbol.

2003 Nov 06 4

Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 handbook, halfpage MNA721 1 26 Fig.3 IEC logic symbol. Fig.4 Logic diagram. handbook, halfpage MNA110 A Y RECOMMENDED OPERATING CONDITIONS LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V). Note 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. SYMBOL PARAMETER CONDITIONS 74AHC3G04 74AHCT3G04 UNIT VI input voltage 0 − 5.5 0 − 5.5 V VO output voltage 0 − VCC 0 − VCC V Tamb operating ambient temperature see DC and AC characteristics per device −40 +25 +125 −40 +25 +125 °C tr,tf (Δt/Δf) input rise and fall times VCC = 3.3±0.3 V −− 100 −−− ns/V SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC supply voltage −0.5 +7.0 V VI input voltage −0.5 +7.0 V IIK input diode current V I< −0.5 V −− 20 mA IOK output diode current −0.5 V < VO <V CC + 0.5 V; note 1 −± 20 mA IO output source or sink current −0.5 V < VO <V CC + 0.5 V −± 25 mA ICC ,IGND VCC or GND current −± 75 mA Tstg storage temperature −65 +150 °C PD power dissipation T amb = −40 to +125°C − 250 mW

2003 Nov 06 5

Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 DC CHARACTERISTICS Type 74AHC3G04 At recommended operating conditions; voltages are referenced to GND (ground=0V ) . SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) Tamb =2 5°C VIH HIGH-level input voltage 2.0 1.5 −− V 3.0 2.1 −− V 5.5 3.85 −− V VIL LOW-level input voltage 2.0 −− 0.5 V 3.0 −− 0.9 V 5.5 −− 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 2.0 − V IO = −50 µA 3.0 2.9 3.0 − V IO = −50 µA 4.5 4.4 4.5 − V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 − 0 0.1 V IO =5 0µA 3.0 − 0 0.1 V IO =5 0µA 4.5 − 0 0.1 V IO = 4.0 mA 3.0 −− 0.36 V IO = 8.0 mA 4.5 −− 0.36 V ILI input leakage current VI=V CC or GND 5.5 −− 0.1 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 10 µA C I input capacitance −− 1.5 10 pF

2003 Nov 06 6

Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 Tamb = −40 to +85°C VIH HIGH-level input voltage 2.0 1.5 −− V 3.0 2.1 −− V 5.5 3.85 −− V VIL LOW-level input voltage 2.0 −− 0.5 V 3.0 −− 0.9 V 5.5 −− 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 −− V IO = −50 µA 3.0 2.9 −− V IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 −− 0.1 V IO =5 0µA 3.0 −− 0.1 V IO =5 0µA 4.5 −− 0.1 V IO = 4.0 mA 3.0 −− 0.44 V IO = 8.0 mA 4.5 −− 0.44 V ILI input leakage current VI=V CC or GND 5.5 −− 1.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 10 µA C I input capacitance −− − 10 pF SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)

2003 Nov 06 7

Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 Tamb = −40 to +125°C VIH HIGH-level input voltage 2.0 1.5 −− V 3.0 2.1 −− V 5.5 3.85 −− V VIL LOW-level input voltage 2.0 −− 0.5 V 3.0 −− 0.9 V 5.5 −− 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 −− V IO = −50 µA 3.0 2.9 −− V IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 −− 0.1 V IO =5 0µA 3.0 −− 0.1 V IO =5 0µA 4.5 −− 0.1 V IO = 4.0 mA 3.0 −− 0.55 V IO = 8.0 mA 4.5 −− 0.55 V ILI input leakage current VI=V CC or GND 5.5 −− 2.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 40 µA C I input capacitance −− − 10 pF SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)

2003 Nov 06 8

Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 Type 74AHCT3G04 At recommended operating conditions; voltages are referenced to GND (ground=0V ) . SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) Tamb =2 5°C VIH HIGH-level input voltage 4.5 to 5.5 2.0 −− V VIL LOW-level input voltage 4.5 to 5.5 −− 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 4.5 − V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 − 0 0.1 V IO = 8.0 mA 4.5 −− 0.36 V ILI input leakage current V I=V IH or VIL 5.5 −− 0.1 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 1.0 µA ΔICC additional quiescent supply current per input pin VI= 3.4 V; other inputs at VCC or GND; IO =0 5.5 −− 1.35 mA C I input capacitance − 1.5 10 pF Tamb = −40 to +85°C VIH HIGH-level input voltage 4.5 to 5.5 2.0 −− V VIL LOW-level input voltage 4.5 to 5.5 −− 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 −− 0.1 V IO = 8.0 mA 4.5 −− 0.44 V ILI input leakage current V I=V IH or VIL 5.5 −− 1.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 10 µA ΔICC additional quiescent supply current per input pin VI= 3.4 V; other inputs at VCC or GND; IO =0 5.5 −− 1.5 mA C I input capacitance −− − 10 pF

2003 Nov 06 9

Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 Tamb = −40 to +125°C VIH HIGH-level input voltage 4.5 to 5.5 2.0 −− V VIL LOW-level input voltage 4.5 to 5.5 −− 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 −− 0.1 V IO = 8.0 mA 4.5 −− 0.55 V ILI input leakage current V I=V IH or VIL 5.5 −− 2.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 40 µA ΔICC additional quiescent supply current per input pin VI= 3.4 V; other inputs at VCC or GND; IO =0 5.5 −− 1.5 mA C I input capacitance −− − 10 pF SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)

2003 Nov 06 10

Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 AC CHARACTERISTICS Type 74AHC3G04 GND = 0 V; tr =tf≤ 3.0 ns. Type 74AHCT3G04 GND = 0 V; tr =tf≤ 3.0 ns. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF) V CC (V) Tamb =2 5°C tPHL /tPLH propagation delay input nA to output nY see Figs 5 and 6 15 3.0 to 3.6 −− 7.1 ns 3.3 − 4.3 − ns 5 − 3.1 − ns 50 3.0 to 3.6 −− 10.6 ns 3.3 − 6.1 − ns 5 − 4.5 − ns Tamb = −40 to +85°C tPHL /tPLH propagation delay input nA to output nY see Figs 5 and 6 15 3.0 to 3.6 1.0 − 8.5 ns 4.5 to 5.5 1.0 − 6.5 ns 50 3.0 to 3.6 1.0 − 12 ns 4.5 to 5.5 1.0 − 8.5 ns Tamb = −40 to +125°C tPHL /tPLH propagation delay input nA to output nY see Figs 5 and 6 15 3.0 to 3.6 1.0 − 11.0 ns 4.5 to 5.5 1.0 − 7.0 ns 50 3.0 to 3.6 1.0 − 14.5 ns 4.5 to 5.5 1.0 − 9.5 ns SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF) V CC (V) Tamb =2 5°C tPHL /tPLH propagation delay input nA to output nY see Figs 5 and 6 15 4.5 to 5.5 −− 6.7 ns 5 − 3.4 − ns 50 4.5 to 5.5 −− 7.7 ns 5 − 4.9 − ns Tamb = −40 to +85°C tPHL /tPLH propagation delay input nA to output nY see Figs 5 and 6 15 4.5 to 5.5 1.0 − 7.5 ns 50 4.5 to 5.5 1.0 − 8.5 ns

2003 Nov 06 11

Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 AC WAVEFORMS Tamb = −40 to +125°C tPHL /tPLH propagation delay input nA to output nY see Figs 5 and 6 15 4.5 to 5.5 1.0 − 8.5 ns 50 4.5 to 5.5 1.0 − 10.0 ns SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF) V CC (V) handbook, halfpage MNA722 tPLHtPHL VMVM 90% 10% VM VM nY output nA input VI GND VOH VOL tTLHtTHL Fig.5 Input (nA) to output (nY) propagation delays. TYPE VI INPUT REQUIREMENTS VM INPUT VM OUTPUT 74AHC3G04 GND to V CC 50% V CC 50% V CC 74AHCT3G04 GND to 3.0 V 1.5 V 50% V CC

2003 Nov 06 12

Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 Fig.6 Load circuitry for switching times. Definitions for test circuit: C L = load capacitance including jig and probe capacitance (see Chapter “AC characteristics”). R T = termination resistance should be equal to the output impedance Z0 of the pulse generator. handbook, halfpage VCC VI VO MNA101 D.U.T. C LR T PULSE GENERATOR

2003 Nov 06 13

Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 PACKAGE OUTLINES UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(1) Z(1) θ REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.00 0.95 0.75 0.38 0.22 0.18 0.08 3.1 2.9 3.1 2.9 0.65 4.1 3.9 0.70 0.35 0°0.13 0.10.20.5 DIMENSIONS (mm are the original dimensions) Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 0.47 0.33 w Mbp D Z e 0.25 8 5 θ Lp (A3) detail X A L H E E c v M A XA y 2.5 5 mm0 scale TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mmSOT505-2 1.1 pin 1 index

2003 Nov 06 14

Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(2) Z(1) θ REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.00 0.85 0.60 0.27 0.17 0.23 0.08 2.1 1.9 2.4 2.2 0.5 3.2 3.0 0.4 0.1 0°0.13 0.10.20.4 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. 0.40 0.15 Q 0.21 0.19 SOT765-1 MO-187 02-06-07 w Mbp D Z e 0.12 8 5 θ Q Lp (A3) detail X A L H E E c v M A X A y 2.5 5 mm0 scale VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1 pin 1 index

2003 Nov 06 15

Philips Semiconductors Product specification Inverter 74AHC3G04; 74AHCT3G04 DATA SHEET STATUS Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. LEVEL DATA SHEET STATUS (1) PRODUCT STATUS (2)(3) DEFINITION I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.

© Koninklijke Philips Electronics N.V. 2003 SCA75 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 Printed in The Netherlands 01/pp16 Date of release:2003 Nov 06 Document order number: 9397 750 12118