74AHC2G241 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 19

Technical content

  1. General description The 74AHC2G241; 74AHCT2G241 is a high-speed Si-gate CMOS device. The 74AHC2G241; 74AHCT2G241 is a dual non-inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH level at pin 1OE causes output 1Y to assume a high-impedance OFF-state. A LOW level at pin 2OE causes output 2Y to assume a high-impedance OFF-state. Schmitt-trigger action at all inputs makes the circuit highly tolerant for slower input rise and fall times. 2. Features ■ Symmetrical output impedance ■ High noise immunity ■ ESD protection: ◆ HBM EIA/JESD22-A114-A exceeds 2000 V ◆ MM EIA/JESD22-A115-A exceeds 200 V ◆ CDM EIA/JESD22-C101 exceeds 1000 V. ■ Low power dissipation ■ Balanced propagation delays ■ SOT505-2 and SOT765-1 package ■ Specified from−40 °C to +85°C and from−40 °C to +125°C. 3. Quick reference data 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state Rev. 01 — 10 March 2004 Product data sheet Table 1: Quick reference data GND = 0 V; Tamb =2 5°C; tr =tf≤ 3.0 ns. Symbol Parameter Conditions Min Typ Max Unit Type 74AHC2G241 t PHL , tPLH propagation delay nA to nY CL = 15 pF; VCC = 5 V - 3.4 5.5 ns tPZH , tPZL enable time1OE to 1Y C L = 15 pF; VCC = 5 V - 3.6 5.1 ns enable time 2OE to 2Y C L = 15 pF; VCC = 5 V - 3.6 5.6 ns tPHZ , tPLZ disable time1OE to 1Y C L = 15 pF; VCC = 5 V - 4.1 6.8 ns disable time 2OE to 2Y C L = 15 pF; VCC = 5 V - 4.3 6.8 ns C I input capacitance - 1.5 10 pF C PD power dissipation capacitance C L = 50 pF; f = 1 MHz[1][2] -1 0 -p F

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 2 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state [1] C PD is used to determine the dynamic power dissipation (PD inµW). PD =C PD × VCC 2 × fi× N+ ∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz; fo = output frequency in MHz; C L = output load capacitance in pF; VCC = supply voltage in Volts; N = total load switching outputs; ∑ (C L × VCC 2 × fo) = sum of outputs. [2] The condition is VI= GND to VCC . 4. Ordering information 5. Marking Type 74AHCT2G241 tPHL , tPLH propagation delay nA to nY CL = 15 pF; VCC = 5 V - 3.4 5.5 ns tPZH , tPZL enable time1OE to 1Y C L = 15 pF; VCC = 5 V - 3.9 5.1 ns enable time 2OE to 2Y C L = 15 pF; VCC = 5 V - 3.4 5.6 ns tPHZ , tPLZ disable time1OE to 1Y C L = 15 pF; VCC = 5 V - 4.5 6.8 ns disable time 2OE to 2Y C L = 15 pF; VCC = 5 V - 4.0 6.8 ns C I input capacitance - 1.5 10 pF C PD power dissipation capacitance C L = 50 pF; f = 1 MHz[1][2] -1 0 -p F Table 1: Quick reference data …continued GND = 0 V; Tamb =2 5°C; tr =tf≤ 3.0 ns. Symbol Parameter Conditions Min Typ Max Unit Table 2: Ordering information Type number Package Temperature range Name Description Version 74AHC2G241DP −40 °C to +125°C TSSOP8 plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm SOT505-2 74AHCT2G241DP −40 °C to +125°C TSSOP8 plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm SOT505-2 74AHC2G241DC −40 °C to +125°C VSSOP8 plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1 74AHCT2G241DC −40 °C to +125°C VSSOP8 plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1 Table 3: Marking Type number Marking code 74AHC2G241DP A241 74AHCT2G241DP C241 74AHC2G241DC A41 74AHCT2G241DC C41

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 3 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state 6. Functional diagram 7. Pinning information

7.1 Pinning

7.2 Pin description

Fig 1. Logic symbol. Fig 2. IEC logic symbol. 001aaa409 1OE 26 1A 2OE 53 2A 001aaa408

1 EN1

Fig 3. Pin configuration. handbook, halfpage MNA728 241 VCC 2OE1A 2AGND 1OE Table 4: Pin description Symbol Pin Description 1OE 1 output enable input (active LOW) 1A 2 data input 2Y 3 data output GND 4 ground (0 V) 2A 5 data input 1Y 6 data output 2OE 7 output enable input (active HIGH) V CC 8 supply voltage

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 4 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state 8. Functional description [1] H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = high-impedance OFF-state. 9. Limiting values [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 10. Recommended operating conditions Table 5: Function table[1] Input Output Input Output 1OE 1A 1Y 2OE 2A 2Y LLLH LL L HHHHH HXZL XZ Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground=0V ) . Symbol Parameter Conditions Min Max Unit VCC supply voltage −0.5 +7.0 V VI input voltage −0.5 +7.0 V IIK input diode current VI< −0.5 V - −20 mA IOK output diode current VO < −0.5 V or VO >V CC + 0.5 V [1] - ±20 mA IO output source or sink current VO = −0.5 V to (VCC + 0.5 V) - ±25 mA ICC , IGND VCC or GND current - ±75 mA Tstg storage temperature −65 +150 °C Ptot power dissipation T amb = −40 °C to +125°C - 250 mW Table 7: Recommended operating conditions Symbol Parameter Conditions Min. Typ. Max. Unit Type 74AHC2G241 V CC supply voltage 2.0 5.0 5.5 V VI input voltage 0 - 5.5 V VO output voltage 0 - V CC V Tamb operating ambient temperature see Section11 and Section12 −40 +25 +125 °C tr,tf input rise and fall times VCC = 3.3 V± 0.3 V - - 100 ns/V VCC =5V ± 0.5 V - - 20 ns/V Type 74AHCT2G241 V CC supply voltage 4.5 5.0 5.5 V

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 5 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state 11. Static characteristics VI input voltage 0 - 5.5 V VO output voltage 0 - V CC V Tamb operating ambient temperature see Section11 and Section12 −40 +25 +125 °C tr,tf input rise and fall times VCC =5V ± 0.5 V - - 20 ns/V Table 7: Recommended operating conditions …continued Symbol Parameter Conditions Min. Typ. Max. Unit Table 8: Static characteristics type 74AHC2G241 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit Tamb =2 5°C VIH HIGH-level input voltage VCC = 2.0 V 1.5 - - V VCC = 3.0 V 2.1 - - V VCC = 5.5 V 3.85 - - V VIL LOW-level input voltage VCC = 2.0 V - - 0.5 V VCC = 3.0 V - - 0.9 V VCC = 5.5 V - - 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA; VCC = 2.0 V 1.9 2.0 - V IO = −50 µA; VCC = 3.0 V 2.9 3.0 - V IO = −50 µA; VCC = 4.5 V 4.4 4.5 - V IO = −4.0 mA; VCC = 3.0 V 2.58 - - V IO = −8.0 mA; VCC = 4.5 V 3.94 - - V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA; VCC = 2.0 V - 0 0.1 V IO =5 0µA; VCC = 3.0 V - 0 0.1 V IO =5 0µA; VCC = 4.5 V - 0 0.1 V IO = 4.0 mA; VCC = 3.0 V - - 0.36 V IO = 8.0 mA; VCC = 4.5 V - - 0.36 V IOZ 3-state OFF-state current VI=V CC or GND; VCC = 5.5 V - - 0.25 µA ILI input leakage current VI=V CC or GND; VCC = 5.5 V - - 0.1 µA ICC quiescent supply current VI=V CC or GND; IO =0A ; VCC = 5.5 V - - 1.0 µA C I input capacitance - 1.5 10 pF Tamb = −40 °C to +85°C VIH HIGH-level input voltage VCC = 2.0 V 1.5 - - V VCC = 3.0 V 2.1 - - V VCC = 5.5 V 3.85 - - V

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 6 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state VIL LOW-level input voltage VCC = 2.0 V - - 0.5 V VCC = 3.0 V - - 0.9 V VCC = 5.5 V - - 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA; VCC = 2.0 V 1.9 - - V IO = −50 µA; VCC = 3.0 V 2.9 - - V IO = −50 µA; VCC = 4.5 V 4.4 - - V IO = −4.0 mA; VCC = 3.0 V 2.48 - - V IO = −8.0 mA; VCC = 4.5 V 3.8 - - V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA; VCC = 2.0 V - - 0.1 V IO =5 0µA; VCC = 3.0 V - - 0.1 V IO =5 0µA; VCC = 4.5 V - - 0.1 V IO = 4.0 mA; VCC = 3.0 V - - 0.44 V IO = 8.0 mA; VCC = 4.5 V - - 0.44 V IOZ 3-state OFF-state current VI=V CC or GND; VCC = 5.5 V - - 2.5 µA ILI input leakage current VI=V CC or GND; VCC = 5.5 V - - 1.0 µA ICC quiescent supply current VI=V CC or GND; IO =0A ; VCC = 5.5 V --1 0 µA C I input capacitance - - 10 pF Tamb = −40 °C to +125°C VIH HIGH-level input voltage VCC = 2.0 V 1.5 - - V VCC = 3.0 V 2.1 - - V VCC = 5.5 V 3.85 - - V VIL LOW-level input voltage VCC = 2.0 V - - 0.5 V VCC = 3.0 V - - 0.9 V VCC = 5.5 V - - 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA; VCC = 2.0 V 1.9 - - V IO = −50 µA; VCC = 3.0 V 2.9 - - V IO = −50 µA; VCC = 4.5 V 4.4 - - V IO = −4.0 mA; VCC = 3.0 V 2.40 - - V IO = −8.0 mA; VCC = 4.5 V 3.70 - - V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA; VCC = 2.0 V - - 0.1 V IO =5 0µA; VCC = 3.0 V - - 0.1 V IO =5 0µA; VCC = 4.5 V - - 0.1 V IO = 4.0 mA; VCC = 3.0 V - - 0.55 V IO = 8.0 mA; VCC = 4.5 V - - 0.55 V Table 8: Static characteristics type 74AHC2G241 …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 7 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state IOZ 3-state OFF-state current VI=V CC or GND; VCC = 5.5 V - - 10 µA ILI input leakage current VI=V CC or GND; VCC = 5.5 V - - 2.0 µA ICC quiescent supply current VI=V CC or GND; IO =0A ; VCC = 5.5 V --4 0 µA C I input capacitance - - 10 pF Table 8: Static characteristics type 74AHC2G241 …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit Table 9: Static characteristics type 74AHCT2G241 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit Tamb =2 5°C VIH HIGH-level input voltage VCC = 4.5 V to 5.5 V 2.0 - - V VIL LOW-level input voltage VCC = 4.5 V to 5.5 V - - 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA; VCC = 4.5 V 4.4 4.5 - V IO = −8.0 mA; VCC = 4.5 V 3.94 - - V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA; VCC = 4.5 V - 0 0.1 V IO = 8.0 mA; VCC = 4.5 V - - 0.36 V IOZ 3-state OFF-state current VI=V CC or GND; VCC = 5.5 V - - 0.25 µA ILI input leakage current VI=V IH or VIL; VCC = 5.5 V - - 0.1 µA ICC quiescent supply current VI=V CC or GND; IO =0A ; VCC = 5.5 V - - 1.0 µA ΔICC additional quiescent supply current per input pin V I= 3.4 V; other inputs at VCC or GND; IO =0A ; VCC = 5.5 V - - 1.35 mA C I input capacitance - 1.5 10 pF Tamb = −40 °C to +85°C VIH HIGH-level input voltage VCC = 4.5 V to 5.5 V 2.0 - - V VIL LOW-level input voltage VCC = 4.5 V to 5.5 V - - 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA; VCC = 4.5 V 4.4 - - V IO = −8.0 mA; VCC = 4.5 V 3.8 - - V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA; VCC = 4.5 V - - 0.1 V IO = 8.0 mA; VCC = 4.5 V - - 0.44 V IOZ 3-state OFF-state current VI=V CC or GND; VCC = 5.5 V - - 2.5 µA

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 8 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state 12. Dynamic characteristics ILI input leakage current VI=V IH or VIL; VCC = 5.5 V - - 1.0 µA ICC quiescent supply current VI=V CC or GND; IO =0A ; VCC = 5.5 V --1 0 µA ΔICC additional quiescent supply current per input pin V I= 3.4 V; other inputs at VCC or GND; IO =0A ; VCC = 5.5 V - - 1.5 mA C I input capacitance - - 10 pF Tamb = −40 °C to +125°C VIH HIGH-level input voltage VCC = 4.5 V to 5.5 V 2.0 - - V VIL LOW-level input voltage VCC = 4.5 V to 5.5 V - - 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA; VCC = 4.5 V 4.4 - - V IO = −8.0 mA; VCC = 4.5 V 3.70 - - V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA; VCC = 4.5 V - - 0.1 V IO = 8.0 mA; VCC = 4.5 V - - 0.55 V IOZ 3-state OFF-state current VI=V CC or GND; VCC = 5.5 V - - 10 µA ILI input leakage current VI=V IH or VIL; VCC = 5.5 V - - 2.0 µA ICC quiescent supply current VI=V CC or GND; IO =0A ; VCC = 5.5 V --4 0 µA ΔICC additional quiescent supply current per input pin V I= 3.4 V; other inputs at VCC or GND; IO =0A ; VCC = 5.5 V - - 1.5 mA C I input capacitance - - 10 pF Table 9: Static characteristics type 74AHCT2G241 …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit Table 10: Dynamic characteristics type 74AHC2G241 GND = 0 V; tr =tf≤ 3.0 ns; seeFigure7. Symbol Parameter Conditions Min Typ Max Unit Tamb =2 5°C tPHL , tPLH propagation delay nA to nY see Figure4 VCC = 3.0 V to 3.6 V; CL =1 5p F [1] - 4.7 8.0 ns VCC = 4.5 V to 5.5 V; CL =1 5p F [2] - 3.4 5.5 ns VCC = 3.0 V to 3.6 V; CL =5 0p F [1] - 6.6 11.5 ns VCC = 4.5 V to 5.5 V; CL =5 0p F [2] - 4.7 7.5 ns

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 9 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state tPZH , tPZL enable time1OE to 1Y see Figure5 VCC = 3.0 V to 3.6 V; CL =1 5p F [1] - 5.0 8.0 ns VCC = 4.5 V to 5.5 V; CL =1 5p F [2] - 3.6 5.1 ns VCC = 3.0 V to 3.6 V; CL =5 0p F [1] - 6.9 11.5 ns VCC = 4.5 V to 5.5 V; CL =5 0p F [2] - 4.9 7.5 ns enable time 2OE to 2Y seeFigure6 VCC = 3.0 V to 3.6 V; CL =1 5p F [1] - 4.9 8.0 ns VCC = 4.5 V to 5.5 V; CL =1 5p F [2] - 3.6 5.6 ns VCC = 3.0 V to 3.6 V; CL =5 0p F [1] - 7.0 11.5 ns VCC = 4.5 V to 5.5 V; CL =5 0p F [2] - 5.4 8.0 ns tPHZ , tPLZ disable time1OE to 1Y see Figure5 VCC = 3.0 V to 3.6 V; CL =1 5p F [1] - 6.0 9.7 ns VCC = 4.5 V to 5.5 V; CL =1 5p F [2] - 4.1 6.8 ns VCC = 3.0 V to 3.6 V; CL =5 0p F [1] - 8.3 13.2 ns VCC = 4.5 V to 5.5 V; CL =5 0p F [2] - 5.7 8.8 ns disable time 2OE to 2Y seeFigure6 VCC = 3.0 V to 3.6 V; CL =1 5p F [1] - 6.3 9.7 ns VCC = 4.5 V to 5.5 V; CL =1 5p F [2] - 4.3 6.8 ns VCC = 3.0 V to 3.6 V; CL =5 0p F [1] - 9.0 13.2 ns VCC = 4.5 V to 5.5 V; CL =5 0p F [2] - 6.1 8.8 ns Tamb = −40 °C to +85°C tPHL , tPLH propagation delay nA to nY see Figure4 VCC = 3.0 V to 3.6 V; CL = 15 pF 1.0 - 9.5 ns VCC = 4.5 V to 5.5 V; CL = 15 pF 1.0 - 6.5 ns VCC = 3.0 V to 3.6 V; CL = 50 pF 1.0 - 13.0 ns VCC = 4.5 V to 5.5 V; CL = 50 pF 1.0 - 8.5 ns tPZH , tPZL enable time1OE to 1Y see Figure5 VCC = 3.0 V to 3.6 V; CL = 15 pF 1.0 - 9.5 ns VCC = 4.5 V to 5.5 V; CL = 15 pF 1.0 - 6.0 ns VCC = 3.0 V to 3.6 V; CL = 50 pF 1.0 - 13.0 ns VCC = 4.5 V to 5.5 V; CL = 50 pF 1.0 - 8.5 ns enable time 2OE to 2Y seeFigure6 VCC = 3.0 V to 3.6 V; CL = 15 pF 1.0 - 9.5 ns VCC = 4.5 V to 5.5 V; CL = 15 pF 1.0 - 6.3 ns VCC = 3.0 V to 3.6 V; CL = 50 pF 1.0 - 13.0 ns VCC = 4.5 V to 5.5 V; CL = 50 pF 1.0 - 9.0 ns Table 10: Dynamic characteristics type 74AHC2G241 …continued GND = 0 V; tr =tf≤ 3.0 ns; seeFigure7. Symbol Parameter Conditions Min Typ Max Unit

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 10 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state [1] Typical values are measured at VCC = 3.3 V. [2] Typical values are measured at VCC = 5.0 V. tPHZ , tPLZ disable time1OE to 1Y see Figure5 VCC = 3.0 V to 3.6 V; CL = 15 pF 1.0 - 11.5 ns VCC = 4.5 V to 5.5 V; CL = 15 pF 1.0 - 8.0 ns VCC = 3.0 V to 3.6 V; CL = 50 pF 1.0 - 15.0 ns VCC = 4.5 V to 5.5 V; CL = 50 pF 1.0 - 10.0 ns disable time 2OE to 2Y seeFigure6 VCC = 3.0 V to 3.6 V; CL = 15 pF 1.0 - 11.5 ns VCC = 4.5 V to 5.5 V; CL = 15 pF 1.0 - 8.0 ns VCC = 3.0 V to 3.6 V; CL = 50 pF 1.0 - 15.0 ns VCC = 4.5 V to 5.5 V; CL = 50 pF 1.0 - 10.0 ns Tamb = −40 °C to +125°C tPHL , tPLH propagation delay nA to nY see Figure4 VCC = 3.0 V to 3.6 V; CL = 15 pF 1.0 - 11.5 ns VCC = 4.5 V to 5.5 V; CL = 15 pF 1.0 - 7.0 ns VCC = 3.0 V to 3.6 V; CL = 50 pF 1.0 - 14.5 ns VCC = 4.5 V to 5.5 V; CL = 50 pF 1.0 - 9.5 ns tPZH , tPZL enable time1OE to 1Y see Figure5 VCC = 3.0 V to 3.6 V; CL = 15 pF 1.0 - 11.5 ns VCC = 4.5 V to 5.5 V; CL = 15 pF 1.0 - 6.5 ns VCC = 3.0 V to 3.6 V; CL = 50 pF 1.0 - 14.5 ns VCC = 4.5 V to 5.5 V; CL = 50 pF 1.0 - 9.5 ns enable time 2OE to 2Y seeFigure6 VCC = 3.0 V to 3.6 V; CL = 15 pF 1.0 - 10.0 ns VCC = 4.5 V to 5.5 V; CL = 15 pF 1.0 - 7.0 ns VCC = 3.0 V to 3.6 V; CL = 50 pF 1.0 - 14.5 ns VCC = 4.5 V to 5.5 V; CL = 50 pF 1.0 - 9.5 ns tPHZ , tPLZ disable time1OE to 1Y see Figure5 VCC = 3.0 V to 3.6 V; CL = 15 pF 1.0 - 12.5 ns VCC = 4.5 V to 5.5 V; CL = 15 pF 1.0 - 8.5 ns VCC = 3.0 V to 3.6 V; CL = 50 pF 1.0 - 16.5 ns VCC = 4.5 V to 5.5 V; CL = 50 pF 1.0 - 11.0 ns disable time 2OE to 2Y seeFigure6 VCC = 3.0 V to 3.6 V; CL = 15 pF 1.0 - 12.5 ns VCC = 4.5 V to 5.5 V; CL = 15 pF 1.0 - 8.5 ns VCC = 3.0 V to 3.6 V; CL = 50 pF 1.0 - 16.5 ns VCC = 4.5 V to 5.5 V; CL = 50 pF 1.0 - 11.0 ns Table 10: Dynamic characteristics type 74AHC2G241 …continued GND = 0 V; tr =tf≤ 3.0 ns; seeFigure7. Symbol Parameter Conditions Min Typ Max Unit

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 11 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state Table 11: Dynamic characteristics type 74AHCT2G241 GND = 0 V; tr =tf≤ 3.0 ns; seeFigure7 Symbol Parameter Conditions Min Typ Max Unit Tamb =2 5°C [1] tPHL , tPLH propagation delay nA to nY see Figure4; VCC = 4.5 V to 5.5 V C L = 15 pF - 3.4 5.5 ns C L = 50 pF - 4.7 7.5 ns tPZH , tPZL enable time1OE to 1Y see Figure5; VCC = 4.5 V to 5.5 V C L = 15 pF - 3.9 5.1 ns C L = 50 pF - 5.1 7.5 ns enable time 2OE to 2Y seeFigure6; VCC = 4.5 V to 5.5 V C L = 15 pF - 3.4 5.6 ns C L = 50 pF - 4.8 7.5 ns tPHZ , tPLZ disable time1OE to 1Y see Figure5; VCC = 4.5 V to 5.5 V C L = 15 pF - 4.5 6.8 ns C L = 50 pF - 6.1 8.8 ns disable time 2OE to 2Y seeFigure6; VCC = 4.5 V to 5.5 V C L = 15 pF - 4.0 6.8 ns C L = 50 pF - 5.7 8.8 ns Tamb = −40 °C to +85°C tPHL , tPLH propagation delay nA to nY see Figure4; VCC = 4.5 V to 5.5 V C L = 15 pF 1.0 - 6.5 ns C L = 50 pF 1.0 - 8.5 ns tPZH , tPZL enable time1OE to 1Y see Figure5; VCC = 4.5 V to 5.5 V C L = 15 pF 1.0 - 6.0 ns C L = 50 pF 1.0 - 8.5 ns enable time 2OE to 2Y seeFigure6; VCC = 4.5 V to 5.5 V C L = 15 pF 1.0 - 6.3 ns C L = 50 pF 1.0 - 9.0 ns tPHZ , tPLZ disable time1OE to 1Y see Figure5; VCC = 4.5 V to 5.5 V C L = 15 pF 1.0 - 8.0 ns C L = 50 pF 1.0 - 10.0 ns disable time 2OE to 2Y seeFigure6; VCC = 4.5 V to 5.5 V C L = 15 pF 1.0 - 8.0 ns C L = 50 pF 1.0 - 10.0 ns Tamb = −40 °C to +125°C tPHL , tPLH propagation delay nA to nY see Figure4; VCC = 4.5 V to 5.5 V C L = 15 pF 1.0 - 7.0 ns C L = 50 pF 1.0 - 9.5 ns

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 12 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state [1] All typical values are measured at VCC = 5.0 V. 13. Waveforms tPZH , tPZL enable time1OE to 1Y see Figure5; VCC = 4.5 V to 5.5 V C L = 15 pF 1.0 - 6.5 ns C L = 50 pF 1.0 - 9.5 ns enable time 2OE to 2Y seeFigure6; VCC = 4.5 V to 5.5 V C L = 15 pF 1.0 - 6.5 ns C L = 50 pF 1.0 - 9.5 ns tPHZ , tPLZ disable time1OE to 1Y see Figure5; VCC = 4.5 V to 5.5 V C L = 15 pF 1.0 - 8.5 ns C L = 50 pF 1.0 - 11.0 ns disable time 2OE to 2Y seeFigure6; VCC = 4.5 V to 5.5 V C L = 15 pF 1.0 - 8.5 ns C L = 50 pF 1.0 - 11.0 ns Table 11: Dynamic characteristics type 74AHCT2G241 …continued GND = 0 V; tr =tf≤ 3.0 ns; seeFigure7 Symbol Parameter Conditions Min Typ Max Unit Measurement points are given inTable12. Fig 4. The input (nA) to output (nY) propagation delays. Table 12: Measurement points Type VI input requirementsVM input VM output 74AHC2G241 GND to V CC 5 0%V CC 5 0%V CC 74AHCT2G241 GND to 3.0 V 1.5 V 50 % V CC mna230 tPHL tPLH VM VMnA input nY output GND VI VOH VOL

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 13 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state Measurement points are given inTable12. Fig 5. The 3-state enable and disable times. Measurement points are given inTable12. Fig 6. The 3-state enable and disable times. 001aaa411 tPLZ tPHZ outputs disabled outputs enabled outputs enabled output LOW-to-OFF OFF-to-LOW output HIGH-to-OFF OFF-to-HIGH 1OE input VI VOL VOH VCC VM GND GND tPZL tPZH VM VM VOH − 0.3 V VOL + 0.3 V 001aaa410 tPLZ tPHZ outputs disabled outputs enabled VOH − 0.3 V VOL + 0.3 V outputs enabled output LOW-to-OFF OFF-to-LOW output HIGH-to-OFF OFF-to-HIGH 2OE input VI VOL VOH VCC VM GND GND tPZL tPZH VM VM

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 14 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state Test data is given inTable13. Definitions for test circuit: C L = load capacitance including jig and probe capacitance (seeSection12 for the value). R L = load resistance. R T = Termination resistance should be equal to the output impedance Zo of the pulse generator. Fig 7. Load circuitry for switching times. Table 13: Test data Test S1 tPLH , tPHL open tPLZ , tPZL VCC tPHZ , tPZH GND open GND VCC VCC VI VO mna232 D.U.T. C LR T R L = 1000 Ω PULSE GENERATOR

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 15 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state 14. Package outline Fig 8. Package outline TSSOP8. UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(1) Z(1) q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.00 0.95 0.75 0.38 0.22 0.18 0.08 3.1 2.9 3.1 2.9 0.65 4.1 3.9 0.70 0.35 0°0.13 0.10.20.5 DIMENSIONS (mm are the original dimensions) Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 0.47 0.33 w Mbp D Z e 0.25 8 5 q Lp (A3) detail X A L H E E c v M A XA y 2.5 5 mm0 scale TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mmSOT505-2 1.1 pin 1 index

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 16 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state Fig 9. Package outline VSSOP8. UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(2) Z(1) θ REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.00 0.85 0.60 0.27 0.17 0.23 0.08 2.1 1.9 2.4 2.2 0.5 3.2 3.0 0.4 0.1 0°0.13 0.10.20.4 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. 0.40 0.15 Q 0.21 0.19 SOT765-1 MO-187 02-06-07 w Mbp D Z e 0.12 8 5 θ Q Lp (A3) detail X A L H E E c v M A X A y 2.5 5 mm0 scale VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1 pin 1 index

9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 17 of 19 Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state 15. Revision history Table 14: Revision history Document ID Release date Data sheet statusChange notice Order number Supersedes 74AHC_AHCT2G241_1 20040310 Product data - 9397 750 12887 -

Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state 9397 750 12887 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 01 — 10 March 2004 18 of 19 16. Data sheet status [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 17. Definitions Short-form specification —The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 18. Disclaimers Life support —These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes —Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 19. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com Level Data sheet status[1] Product status[2][3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).

© Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 10 March 2004 Document order number: 9397 750 12887 Published in The Netherlands Philips Semiconductors 74AHC2G241; 74AHCT2G241 Dual buffer/line driver; 3-state 20. Contents