74AHC2G125 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 18
Technical content
Product specification 2004 Jan 13 INTEGRATED CIRCUITS 74AHC2G125; 74AHCT2G125 Bus buffer/line driver; 3-state
2004 Jan 13 2
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125
FEATURES
- Symmetrical output impedance
- High noise immunity
- ESD protection: – HBM EIA/JESD22-A114-A exceeds 2000 V – MM EIA/JESD22-A115-A exceeds 200 V – CDM EIA/JESD22-C101 exceeds 1000 V.
- Low power dissipation
- Balanced propagation delays
- SOT505-2 and SOT765-1 package
- Specified from−40 to +85°C and −40 to +125°C.
DESCRIPTION
The 74AHC2G/AHCT2G125 is a high-speed Si-gate CMOS device. The 74AHC2G/AHCT2G125 provides a dual non-inverting buffer/line driver with 3-state output. The 3-state output is controlled by the output enable input (n OE). A HIGH at pin nOE causes the output to assume a high-impedance OFF-state. QUICK REFERENCE DATA GND = 0 V; Tamb =2 5°C; tr =tf≤ 3.0 ns. Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW). PD =C PD × VCC 2 × fi× N+ ∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz; fo = output frequency in MHz; C L = output load capacitance in pF; VCC = supply voltage in Volts; N = total load switching outputs; ∑ (C L × VCC 2 × fo) = sum of outputs. 2. The condition is VI= GND to VCC . SYMBOL PARAMETER CONDITIONS TYPICAL UNIT AHC2G AHCT2G tPHL /tPLH propagation delay nA to nY CL = 15 pF; VCC = 5 V 3.4 3.4 ns C I input capacitance 1.5 1.5 pF C PD power dissipation capacitance CL = 50 pF; f = 1 MHz; notes 1 and 2 9 11 pF
2004 Jan 13 3
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125 FUNCTION TABLE See note 1. Note 1. H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = high-impedance OFF-state.
ORDERING INFORMATION
n OE nA nY LLL LHH HXZ TYPE NUMBER PACKAGE TEMPERATURE RANGE PINS PACKAGE MATERIAL CODE MARKING 74AHC2G125DP −40 to +125°C 8 TSSOP8 plastic SOT505-2 A25 74AHCT2G125DP −40 to +125°C 8 TSSOP8 plastic SOT505-2 C25 74AHC2G125DC −40 to +125°C 8 VSSOP8 plastic SOT765-1 A25 74AHCT2G125DC −40 to +125°C 8 VSSOP8 plastic SOT765-1 C25 PIN SYMBOL DESCRIPTION
11 OE output enable input (active LOW)
4 GND ground (0 V)
OE output enable input (active LOW) 8V CC supply voltage
2004 Jan 13 4
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125 handbook, halfpage MCE184 125 VCC 2OE1A 2AGND 1OE Fig.1 Pin configuration. handbook, halfpage MCE185 1A 1Y2 1OE 2A 2Y5 2OE Fig.2 Logic symbol. handbook, halfpage MCE186 1OE 2OE Fig.3 IEC logic symbol.Fig.3 IEC logic symbol. handbook, halfpage MCE187 nA nY nOE Fig.4 Logic diagram.
2004 Jan 13 5
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125 RECOMMENDED OPERATING CONDITIONS LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V). Note 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. SYMBOL PARAMETER CONDITIONS 74AHC2G125 74AHCT2G125 UNIT VI input voltage 0 − 5.5 0 − 5.5 V VO output voltage 0 − VCC 0 − VCC V Tamb operating ambient temperature see DC and AC characteristics per device −40 +25 +125 −40 +25 +125 °C tr,tf input rise and fall times VCC = 3.3± 0.3 V −− 100 −−− ns/V SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC supply voltage −0.5 +7.0 V VI input voltage −0.5 +7.0 V IIK input diode current V I< −0.5 V −− 20 mA IOK output diode current V O < −0.5 V or VO >V CC + 0.5 V; note 1 −± 20 mA IO output source or sink current−0 . 5V<VO <V CC + 0.5 V −± 25 mA ICC ,IGND VCC or GND current −± 75 mA Tstg storage temperature −65 +150 °C Ptot power dissipation T amb = −40 to +125°C − 250 mW
2004 Jan 13 6
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125 DC CHARACTERISTICS Type 74AHC2G125 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) Tamb =2 5°C VIH HIGH-level input voltage 2.0 1.5 −− V 3.0 2.1 −− V 5.5 3.85 −− V VIL LOW-level input voltage 2.0 −− 0.5 V 3.0 −− 0.9 V 5.5 −− 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 2.0 − V IO = −50 µA 3.0 2.9 3.0 − V IO = −50 µA 4.5 4.4 4.5 − V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 − 0 0.1 V IO =5 0µA 3.0 − 0 0.1 V IO =5 0µA 4.5 − 0 0.1 V IO = 4.0 mA 3.0 −− 0.36 V IO = 8.0 mA 4.5 −− 0.36 V IOZ 3-state output OFF-state current VI=V CC or GND 5.5 −− 0.25 µA ILI input leakage current VI=V CC or GND 5.5 −− 0.1 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 1.0 µA C I input capacitance −− 1.5 10 pF
2004 Jan 13 7
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125 Tamb = −40 to +85°C VIH HIGH-level input voltage 2.0 1.5 −− V 3.0 2.1 −− V 5.5 3.85 −− V VIL LOW-level input voltage 2.0 −− 0.5 V 3.0 −− 0.9 V 5.5 −− 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 −− V IO = −50 µA 3.0 2.9 −− V IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 −− 0.1 V IO =5 0µA 3.0 −− 0.1 V IO =5 0µA 4.5 −− 0.1 V IO = 4.0 mA 3.0 −− 0.44 V IO = 8.0 mA 4.5 −− 0.44 V IOZ 3-state output OFF-state current VI=V CC or GND 5.5 −− 2.5 µA ILI input leakage current VI=V CC or GND 5.5 −− 1.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 10 µA C I input capacitance −− − 10 pF SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)
2004 Jan 13 8
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125 Tamb = −40 to +125°C VIH HIGH-level input voltage 2.0 1.5 −− V 3.0 2.1 −− V 5.5 3.85 −− V VIL LOW-level input voltage 2.0 −− 0.5 V 3.0 −− 0.9 V 5.5 −− 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 −− V IO = −50 µA 3.0 2.9 −− V IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 −− 0.1 V IO =5 0µA 3.0 −− 0.1 V IO =5 0µA 4.5 −− 0.1 V IO = 4.0 mA 3.0 −− 0.55 V IO = 8.0 mA 4.5 −− 0.55 V IOZ 3-state output OFF-state current VI=V CC or GND 5.5 −− 10 µA ILI input leakage current VI=V CC or GND 5.5 −− 2.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 40 µA C I input capacitance −− − 10 pF SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)
2004 Jan 13 9
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125 Type 74AHCT2G125 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) Tamb =2 5°C VIH HIGH-level input voltage 4.5 to 5.5 2.0 −− V VIL LOW-level input voltage 4.5 to 5.5 −− 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 4.5 − V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 − 0 0.1 V IO = 8.0 mA 4.5 −− 0.36 V IOZ 3-state output OFF-state current VI=V CC or GND 5.5 −− 0.25 µA ILI input leakage current V I=V IH or VIL 5.5 −− 0.1 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 1.0 µA ΔICC additional quiescent supply current per input pin VI= 3.4 V; other inputs at VCC or GND; IO =0 5.5 −− 1.35 mA C I input capacitance − 1.5 10 pF Tamb = −40 to +85°C VIH HIGH-level input voltage 4.5 to 5.5 2.0 −− V VIL LOW-level input voltage 4.5 to 5.5 −− 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 −− 0.1 V IO = 8.0 mA 4.5 −− 0.44 V IOZ 3-state output OFF-state current VI=V CC or GND 5.5 −− 2.5 µA ILI input leakage current V I=V IH or VIL 5.5 −− 1.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 10 µA ΔICC additional quiescent supply current per input pin VI= 3.4 V; other inputs at VCC or GND; IO =0 5.5 −− 1.5 mA C I input capacitance −− − 10 pF
2004 Jan 13 10
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125 Tamb = −40 to +125°C VIH HIGH-level input voltage 4.5 to 5.5 2.0 −− V VIL LOW-level input voltage 4.5 to 5.5 −− 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 −− 0.1 V IO = 8.0 mA 4.5 −− 0.55 V IOZ 3-state output OFF-state current VI=V CC or GND 5.5 −− 10 µA ILI input leakage current V I=V IH or VIL 5.5 −− 2.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 40 µA ΔICC additional quiescent supply current per input pin VI= 3.4 V; other inputs at VCC or GND; IO =0 5.5 −− 1.5 mA C I input capacitance −− − 10 pF SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)
2004 Jan 13 11
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125 AC CHARACTERISTICS Type 74AHC2G125 GND = 0 V; tr =tf≤ 3.0 ns. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF) Tamb =2 5°C VCC = 3.0 to 3.6 V;note 1 tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 15 − 4.7 8.0 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 15 − 5.0 8.0 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 15 − 6.0 9.7 ns tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 50 − 6.6 11.5 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 50 − 6.9 11.5 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 50 − 8.3 13.2 ns VCC = 4.5 to 5.5 V;note 2 tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 15 − 3.4 5.5 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 15 − 3.6 5.1 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 15 − 4.1 6.8 ns tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 50 − 4.8 7.5 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 50 − 4.9 7.5 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 50 − 5.7 8.8 ns Tamb = −40 to +85°C VCC = 3.0 to 3.6 V;note 1 tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 15 1.0 − 9.5 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 15 1.0 − 9.5 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 15 1.0 − 11.5 ns tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 50 1.0 − 13.0 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 50 1.0 − 13.0 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 50 1.0 − 15.0 ns VCC = 4.5 to 5.5 V;note 2 tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 15 1.0 − 6.5 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 15 1.0 − 6.0 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 15 1.0 − 8.0 ns tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 50 1.0 − 8.5 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 50 1.0 − 8.5 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 50 1.0 − 10.0 ns
2004 Jan 13 12
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125 Notes 1. All typical values are measured at VCC = 3.3 V. 2. All typical values are measured at VCC = 5.0 V. Type 74AHCT2G125 GND = 0 V; tr =tf≤ 3.0 ns. Tamb = −40 to +125°C VCC = 3.0 to 3.6 V;note 1 tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 15 1.0 − 11.5 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 15 1.0 − 11.5 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 15 1.0 − 12.5 ns tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 50 1.0 − 14.5 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 50 1.0 − 14.5 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 50 1.0 − 16.5 ns VCC = 4.5 to 5.5 V;note 2 tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 15 1.0 − 7.0 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 15 1.0 − 6.5 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 15 1.0 − 8.5 ns tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 50 1.0 − 9.5 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 50 1.0 − 9.5 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 50 1.0 − 11.0 ns SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF) Tamb =2 5°C VCC = 4.5 to 5.5 V;note 1 tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 15 − 3.4 5.5 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 15 − 3.9 5.1 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 15 − 4.5 6.8 ns tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 50 − 4.8 7.5 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 50 − 5.1 7.5 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 50 − 6.1 8.8 ns Tamb = −40 to +85°C VCC = 4.5 to 5.5 V tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 15 1.0 − 6.5 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 15 1.0 − 6.0 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 15 1.0 − 8.0 ns tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 50 1.0 − 8.5 ns SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF)
2004 Jan 13 13
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125 Note 1. All typical values are measured at VCC = 5.0 V. tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 50 1.0 − 8.5 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 50 1.0 − 10.0 ns Tamb = −40 to +125°C VCC = 4.5 to 5.5 V tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 15 1.0 − 6.5 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 15 1.0 − 6.0 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 15 1.0 − 8.0 ns tPHL /tPLH propagation delay nA to nY see Figs 5 and 7 50 1.0 − 8.5 ns tPZH /tPZL propagation delay nOE to nY see Figs 6 and 7 50 1.0 − 8.5 ns tPHZ /tPLZ propagation delay nOE to nY see Figs 6 and 7 50 1.0 − 10.0 ns SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF) AC WAVEFORMS handbook, halfpage MNA230 tPHL tPLH VM VMnA input nY output GND VI VOH VOL Fig.5 The input (nA) to output (nY) propagation delays. FAMILY VI INPUT REQUIREMENTS VM INPUT V M OUTPUT AHC2G125 GND to V CC 50% V CC 50% V CC AHCT2G125 GND to 3.0 V 1.5 V 50% V CC
2004 Jan 13 14
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125 handbook, full pagewidth MNA122 tPLZ tPHZ output disabled output enabled VOH −0.3 V VOL +0.3 V output enabled output LOW-to-OFF OFF-to-LOW output HIGH-to-OFF OFF-to-HIGH OE input VI VCC VM GND GND tPZL tPZH VM VM Fig.6 The 3-state enable and disable times. FAMILY VI INPUT REQUIREMENTS VM INPUT V M OUTPUT AHC2G125 GND to V CC 50% V CC 50% V CC AHCT2G125 GND to 3.0 V 1.5 V 50% V CC Fig.7 Load circuitry for switching times. Definitions for test circuit: R L = load resistance. C L = load capacitance including jig and probe capacitance (see Chapter “AC characteristics” for the value). R T = termination resistance should be equal to the output impedance Zo of the pulse generator. TEST S 1 tPLH /tPHL open tPLZ /tPZL VCC tPHZ /tPZH GND handbook, full pagewidth open GND VCC VCC VI VO MNA232 D.U.T. C LR T R L = 1000 Ω PULSE GENERATOR
2004 Jan 13 15
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125 PACKAGE OUTLINES UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(1) Z(1) q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.00 0.95 0.75 0.38 0.22 0.18 0.08 3.1 2.9 3.1 2.9 0.65 4.1 3.9 0.70 0.35 0°0.13 0.10.20.5 DIMENSIONS (mm are the original dimensions) Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 0.47 0.33 w Mbp D Z e 0.25 8 5 q Lp (A3) detail X A L H E E c v M A XA y 2.5 5 mm0 scale TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mmSOT505-2 1.1 pin 1 index
2004 Jan 13 16
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125 UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(2) Z(1) q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.00 0.85 0.60 0.27 0.17 0.23 0.08 2.1 1.9 2.4 2.2 0.5 3.2 3.0 0.4 0.1 0°0.13 0.10.20.4 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. 0.40 0.15 Q 0.21 0.19 SOT765-1 MO-187 02-06-07 w Mbp D Z e 0.12 8 5 q Q Lp (A3) detail X A L H E E c v M A X A y 2.5 5 mm0 scale VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1 pin 1 index
2004 Jan 13 17
Philips Semiconductors Product specification Bus buffer/line driver; 3-state 74AHC2G125; 74AHCT2G125 DATA SHEET STATUS Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. LEVEL DATA SHEET STATUS (1) PRODUCT STATUS (2)(3) DEFINITION I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
© Koninklijke Philips Electronics N.V. 2004 SCA76 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 Printed in The Netherlands R44/01/pp18 Date of release:2004 Jan 13 Document order number: 9397 750 12426