74AHC2G00 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 17
Technical content
Product specification 2004 Jan 21 INTEGRATED CIRCUITS 74AHC2G00; 74AHCT2G00 2-input NAND gate
2004 Jan 21 2
Philips Semiconductors Product specification 2-input NAND gate 74AHC2G00; 74AHCT2G00
FEATURES
- Symmetrical output impedance
- High noise immunity
- ESD protection: – HBM EIA/JESD22-A114-A exceeds 2000 V – MM EIA/JESD22-A115-A exceeds 200 V – CDM EIA/JESD22-C101 exceeds 500 V.
- Low power dissipation
- Balanced propagation delays
- SOT505-2 and SOT765-1 package
- Specified from−40 to +85°C and −40 to +125°C.
DESCRIPTION
The 74AHC2G/AHCT2G00 is a high-speed Si-gate CMOS device. The 74AHC2G/AHCT2G00 provides the 2-input NAND gate function. QUICK REFERENCE DATA GND = 0 V; T amb =2 5°C; tr =tf≤ 3.0 ns. Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW). PD =C PD × VCC 2 × fi× N+ Σ(CL × VCC 2 × fo) where: fi= input frequency in MHz; fo = output frequency in MHz; C L = output load capacitance in pF; VCC = supply voltage in Volts; N = total load switching outputs; Σ(C L × VCC 2 × fo) = sum of the outputs. 2. The condition is VI= GND to VCC . SYMBOL PARAMETER CONDITIONS TYPICAL UNIT AHC2G AHCT2G tPHL /tPLH propagation delay nA and nB to nY CL = 15 pF; VCC = 5 V 3.5 3.6 ns C I input capacitance 1.5 1.5 pF C PD power dissipation capacitance per gate C L = 50 pF; f = 1 MHz; notes 1 and 2 17 18 pF
2004 Jan 21 3
Philips Semiconductors Product specification 2-input NAND gate 74AHC2G00; 74AHCT2G00 FUNCTION TABLE See note 1. Note 1. H = HIGH voltage level; L = LOW voltage level.
ORDERING INFORMATION
RANGE PINS PACKAGE MATERIAL CODE MARKING 74AHC2G00DP −40 to +125°C 8 TSSOP8 plastic SOT505-2 A00 74AHCT2G00DP −40 to +125°C 8 TSSOP8 plastic SOT505-2 C00 74AHC2G00DC −40 to +125°C 8 VSSOP8 plastic SOT765-1 A00 74AHCT2G00DC −40 to +125°C 8 VSSOP8 plastic SOT765-1 C00 PIN SYMBOL DESCRIPTION 1 1A data input 2 1B data input 3 2Y data output
4 GND ground (0 V)
2004 Jan 21 4
Philips Semiconductors Product specification 2-input NAND gate 74AHC2G00; 74AHCT2G00 handbook, halfpage MNA711 VCC 1Y1B 2AGND Fig.1 Pin configuration. handbook, halfpage MNA712 1 7 5 3 Fig.2 Logic symbol. handbook, halfpage MNA713 Fig.3 IEC logic symbol. handbook, halfpage MNA099 B A Y Fig.4 Logic diagram.
2004 Jan 21 5
Philips Semiconductors Product specification 2-input NAND gate 74AHC2G00; 74AHCT2G00 RECOMMENDED OPERATING CONDITIONS LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V). Note 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. SYMBOL PARAMETER CONDITIONS 74AHC2G00 74AHCT2G00 UNIT VI input voltage 0 − 5.5 0 − 5.5 V VO output voltage 0 − VCC 0 − VCC V Tamb operating ambient temperature see DC and AC characteristics per device −40 +25 +125 −40 +25 +125 °C tr,tf input rise and fall times SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC supply voltage −0.5 +7.0 V VI input voltage −0.5 +7.0 V IIK input diode current V I< −0.5 V −− 20 mA IOK output diode current V O < −0.5 V or VO >V CC + 0.5 V; note 1 −± 20 mA IO output source or sink current−0 . 5V<VO <V CC + 0.5 V −± 25 mA ICC ,IGND VCC or GND current −± 75 mA Tstg storage temperature −65 +150 °C PD power dissipation T amb = −40 to +125°C − 250 mW
2004 Jan 21 6
Philips Semiconductors Product specification 2-input NAND gate 74AHC2G00; 74AHCT2G00 DC CHARACTERISTICS Type 74AHC2G00 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) Tamb =2 5°C VIH HIGH-level input voltage 2.0 1.5 −− V 3.0 2.1 −− V 5.5 3.85 −− V VIL LOW-level input voltage 2.0 −− 0.5 V 3.0 −− 0.9 V 5.5 −− 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 2.0 − V IO = −50 µA 3.0 2.9 3.0 − V IO = −50 µA 4.5 4.4 4.5 − V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 − 0 0.1 V IO =5 0µA 3.0 − 0 0.1 V IO =5 0µA 4.5 − 0 0.1 V IO = 4.0 mA 3.0 −− 0.36 V IO = 8.0 mA 4.5 −− 0.36 V ILI input leakage current VI=V CC or GND 5.5 −− 0.1 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 10 µA C I input capacitance −− 1.5 10 pF
2004 Jan 21 7
Philips Semiconductors Product specification 2-input NAND gate 74AHC2G00; 74AHCT2G00 Tamb = −40 to +85°C VIH HIGH-level input voltage 2.0 1.5 −− V 3.0 2.1 −− V 5.5 3.85 −− V VIL LOW-level input voltage 2.0 −− 0.5 V 3.0 −− 0.9 V 5.5 −− 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 −− V IO = −50 µA 3.0 2.9 −− V IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 −− 0.1 V IO =5 0µA 3.0 −− 0.1 V IO =5 0µA 4.5 −− 0.1 V IO = 4.0 mA 3.0 −− 0.44 V IO = 8.0 mA 4.5 −− 0.44 V ILI input leakage current VI=V CC or GND 5.5 −− 1.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 10 µA C I input capacitance −− − 10 pF SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)
2004 Jan 21 8
Philips Semiconductors Product specification 2-input NAND gate 74AHC2G00; 74AHCT2G00 Tamb = −40 to +125°C VIH HIGH-level input voltage 2.0 1.5 −− V 3.0 2.1 −− V 5.5 3.85 −− V VIL LOW-level input voltage 2.0 −− 0.5 V 3.0 −− 0.9 V 5.5 −− 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 −− V IO = −50 µA 3.0 2.9 −− V IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 −− 0.1 V IO =5 0µA 3.0 −− 0.1 V IO =5 0µA 4.5 −− 0.1 V IO = 4.0 mA 3.0 −− 0.55 V IO = 8.0 mA 4.5 −− 0.55 V ILI input leakage current VI=V CC or GND 5.5 −− 2.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 40 µA C I input capacitance −− − 10 pF SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)
2004 Jan 21 9
Philips Semiconductors Product specification 2-input NAND gate 74AHC2G00; 74AHCT2G00 Type 74AHCT2G00 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) Tamb =2 5°C VIH HIGH-level input voltage 4.5 to 5.5 2.0 −− V VIL LOW-level input voltage 4.5 to 5.5 −− 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 4.5 − V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 − 0 0.1 V IO = 8.0 mA 4.5 −− 0.36 V ILI input leakage current V I=V IH or VIL 5.5 −− 0.1 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 1.0 µA ΔICC additional quiescent supply current per input pin VI= 3.4 V; other inputs at VCC or GND; IO =0 5.5 −− 1.35 mA C I input capacitance − 1.5 10 pF Tamb = −40 to +85°C VIH HIGH-level input voltage 4.5 to 5.5 2.0 −− V VIL LOW-level input voltage 4.5 to 5.5 −− 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 −− 0.1 V IO = 8.0 mA 4.5 −− 0.44 V ILI input leakage current V I=V IH or VIL 5.5 −− 1.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 10 µA ΔICC additional quiescent supply current per input pin VI= 3.4 V; other inputs at VCC or GND; IO =0 5.5 −− 1.5 mA C I input capacitance −− − 10 pF
2004 Jan 21 10
Philips Semiconductors Product specification 2-input NAND gate 74AHC2G00; 74AHCT2G00 Tamb = −40 to +125°C VIH HIGH-level input voltage 4.5 to 5.5 2.0 −− V VIL LOW-level input voltage 4.5 to 5.5 −− 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 −− 0.1 V IO = 8.0 mA 4.5 −− 0.55 V ILI input leakage current V I=V IH or VIL 5.5 −− 2.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 40 µA ΔICC additional quiescent supply current per input pin VI= 3.4 V; other inputs at VCC or GND; IO =0 5.5 −− 1.5 mA C I input capacitance −− − 10 pF SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)
2004 Jan 21 11
Philips Semiconductors Product specification 2-input NAND gate 74AHC2G00; 74AHCT2G00 AC CHARACTERISTICS Type 74AHC2G00 GND = 0 V; tr =tf≤ 3.0 ns. Notes 1. Typical values are measured at VCC = 3.3 V. 2. Typical values are measured at VCC = 5.0 V. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF) V CC (V) Tamb =2 5°C tPHL /tPLH propagation delay input nA and nB to output nY see Figs 5 and 6 15 3.0 to 3.6 − 4.5(1) 7.9 ns 50 3.0 to 3.6 − 6.5(1) 11.4 ns Tamb = −40 to +85°C tPHL /tPLH propagation delay input nA and nB to output nY see Figs 5 and 6 15 3.0 to 3.6 1.0 − 9.5 ns 4.5 to 5.5 1.0 − 6.5 ns 50 3.0 to 3.6 1.0 − 13.0 ns 4.5 to 5.5 1.0 − 8.5 ns Tamb = −40 to +125°C tPHL /tPLH propagation delay input nA and nB to output nY see Figs 5 and 6 15 3.0 to 3.6 1.0 − 10.5 ns 4.5 to 5.5 1.0 − 7.0 ns 50 3.0 to 3.6 1.0 − 14.5 ns 4.5 to 5.5 1.0 − 9.5 ns
2004 Jan 21 12
Philips Semiconductors Product specification 2-input NAND gate 74AHC2G00; 74AHCT2G00 Type 74AHCT2G00 GND = 0 V; tr =tf≤ 3.0 ns. Note 1. Typical values are measured at VCC = 5.0 V. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF) V CC (V) Tamb =2 5°C tPHL /tPLH propagation delay input nA and nB to output nY Tamb = −40 to +85°C tPHL /tPLH propagation delay input nA and nB to output nY see Figs 5 and 6 15 4.5 to 5.5 1.0 − 7.1 ns 50 4.5 to 5.5 1.0 − 9.0 ns Tamb = −40 to +125°C tPHL /tPLH propagation delay input nA and nB to output nY see Figs 5 and 6 15 4.5 to 5.5 1.0 − 8.0 ns 50 4.5 to 5.5 1.0 − 10.0 ns
2004 Jan 21 13
Philips Semiconductors Product specification 2-input NAND gate 74AHC2G00; 74AHCT2G00 AC WAVEFORMS handbook, halfpage MNA213 nA, nB input nY output tPHL tPLH VM VM Fig.5 The inputs (nA and nB) to output (nY) propagation delays. FAMILY VM INPUT VM OUTPUT AHC2G00 50% V CC 50% V CC AHCT2G00 1.5 V 50% V CC Fig.6 Load circuitry for switching times. handbook, halfpage VCC VI VO MNA101 D.U.T. C LR T PULSE GENERATOR Definitions for test circuit: C L = Load capacitance including jig and probe capacitance (See “AC characteristics” for the value). R T = Termination resistance should be equal to the output impedance Z0 of the pulse generator. FAMILY VI INPUT REQUIREMENTS AHC2G00 GND to V CC AHCT2G00 GND to 3.0 V
2004 Jan 21 14
Philips Semiconductors Product specification 2-input NAND gate 74AHC2G00; 74AHCT2G00 PACKAGE OUTLINES UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(1) Z(1) q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.00 0.95 0.75 0.38 0.22 0.18 0.08 3.1 2.9 3.1 2.9 0.65 4.1 3.9 0.70 0.35 0°0.13 0.10.20.5 DIMENSIONS (mm are the original dimensions) Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 0.47 0.33 w Mbp D Z e 0.25 8 5 q Lp (A3) detail X A L H E E c v M A XA y 2.5 5 mm0 scale TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mmSOT505-2 1.1 pin 1 index
2004 Jan 21 15
Philips Semiconductors Product specification 2-input NAND gate 74AHC2G00; 74AHCT2G00 UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(2) Z(1) q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.00 0.85 0.60 0.27 0.17 0.23 0.08 2.1 1.9 2.4 2.2 0.5 3.2 3.0 0.4 0.1 0°0.13 0.10.20.4 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. 0.40 0.15 Q 0.21 0.19 SOT765-1 MO-187 02-06-07 w Mbp D Z e 0.12 8 5 q Q Lp (A3) detail X A L H E E c v M A X A y 2.5 5 mm0 scale VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1 pin 1 index
2004 Jan 21 16
Philips Semiconductors Product specification 2-input NAND gate 74AHC2G00; 74AHCT2G00 DATA SHEET STATUS Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. LEVEL DATA SHEET STATUS (1) PRODUCT STATUS (2)(3) DEFINITION I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
© Koninklijke Philips Electronics N.V. 2004 SCA76 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 Printed in The Netherlands R44/01/pp17 Date of release:2004 Jan 21 Document order number: 9397 750 12474