74AHCT273 NEXPERIA
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 16
Technical content
Datasheet sections
Low-power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard No. 7-A. LOW, independent of clock or data inputs, by a LOW on the MR input. master reset are common to all storage elements.
- Balanced propagation delays
- All inputs have Schmitt-trigger actions
- Inputs accept voltages higher than VCC
- Ideal buffer for MOS microcontroller or memory
- Common clock and master reset
- Input levels:
- For 74AHC273: CMOS level
- For 74AHCT273: TTL level
- ESD protection:
- HBM JESD22-A114E exceeds 2000 V
- MM JESD22-A115-A exceeds 200 V
- CDM JESD22-C101C exceeds 1000 V
- Multiple package options
- Specified from -40 °C to +85 °C and from -40 °C to +125 °C 3. Ordering information
Table 1. Ordering information
Nexperia 74AHC273; 74AHCT273 Octal D-type flip-flop with reset; positive-edge trigger 4. Functional diagram mna763 MR CP Fig. 1. Logic symbol mna764 11 C1 1 R 1D 2 CP MR Fig. 2. IEC logic symbol 001aae056 D RD Q FF8 D RD Q FF7 D RD Q FF6 D RD Q FF5 D RD Q FF4 D RD Q FF3 D RD Q FF2 D CPCPCPCP CPCPCPCP RD Q FF1 CP MR Fig. 3. Logic diagram 74AHC_AHCT273 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 4 — 23 September 2020 2 / 16
Table 2. Pin description
Table 3. Function table ↑ = LOW-to-HIGH; X = don’t care. Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For SOT163-1 (SO20) package: Ptot derates linearly with 12.3 mW/K above 109 °C. For SOT360-1 (TSSOP20) package: Ptot derates linearly with 10.0 mW/K above 100 °C. For SOT764-1 (DHVQFN20) package: Ptot derates linearly with 12.9 mW/K above 111 °C.
- Recommended operating conditions
Table 5. Recommended operating conditions Voltages are referenced to GND (ground = 0 V).
Table 6. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Table 7. Dynamic characteristics Voltages are referenced to GND (ground = 0 V); for test circuit see Fig. 10.
Nexperia 74AHC273; 74AHCT273 Octal D-type flip-flop with reset; positive-edge trigger 25 °C -40 °C to +85 °C -40 °C to +125 °CSymbol Parameter Conditions Min Typ[1] Max Min Max Min Max Unit see Fig. 7 VCC = 3.0 V to 3.6 V CL = 15 pF 75 120 - 65 - 65 - MHz CL = 50 pF 50 75 - 45 - 45 - MHz VCC = 4.5 V to 5.5 V CL = 15 pF 120 165 - 100 - 100 - MHz fmax maximum frequency CL = 50 pF 80 110 - 70 - 70 - MHz CP HIGH or LOW; see Fig. 7 MR LOW; see Fig. 8 tW pulse width Dn to CP; see Fig. 9 tsu set-up time Dn to CP; see Fig. 9 th hold time MR to CP; see Fig. 8 trec recovery time CPD power dissipation capacitance fi = 1 MHz; VI = GND to VCC [4] - 14 - - - - - pF 74AHC_AHCT273 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 4 — 23 September 2020 7 / 16
Nexperia 74AHC273; 74AHCT273 Octal D-type flip-flop with reset; positive-edge trigger 25 °C -40 °C to +85 °C -40 °C to +125 °CSymbol Parameter Conditions Min Typ[1] Max Min Max Min Max Unit 74AHCT273; VCC = 4.5 V to 5.5 V CP to Qn; see Fig. 7 [2] MR to Qn; see Fig. 8 [3] tpd propagation delay see Fig. 7 CL = 15 pF 75 120 - 65 - 65 - MHz fmax maximum frequency CL = 50 pF 50 75 - 45 - 45 - MHz CP HIGH or LOW; see Fig. 7 5.0 - - 6.5 - 6.5 - nstW pulse width MR LOW; see Fig. 8 5.0 - - 6.0 - 6.0 - ns tsu set-up time Dn to CP; see Fig. 9 3.0 - - 3.0 - 3.0 - ns th hold time Dn to CP; see Fig. 9 1.0 - - 1.0 - 1.0 - ns trec recovery time MR to CP; see Fig. 8 2.5 - - 2.5 - 2.5 - ns CPD power dissipation capacitance fi = 1 MHz; VI = GND to VCC [4] - 18 - - - - - pF [1] Typical values are measured at nominal supply voltage (VCC = 3.3 V and VCC = 5.0 V). [2] tpd is the same as tPLH and tPHL. [3] tpd is the same as tPHL only. [4] CPD is used to determine the dynamic power dissipation (PD in μW). PD = CPD x VCC 2 x fi x N + Σ(CL x VCC 2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; Σ(CL x VCC 2 x fo) = sum of the outputs. 10.1. Waveforms and test circuit 001aac426 CP input Qn output tPHL tPLH tW VOH VI GND VOL VM VM 1/fmax Measurement points are given in Table 8. VOL and VOH are typical voltage output levels that occur with the output load. Fig. 7. Clock pulse width, maximum frequency and input to output propagation delays 74AHC_AHCT273 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 4 — 23 September 2020 8 / 16
Measurement points are given in Table 8. VOL and VOH are typical voltage output levels that occur with the output load. Measurement points are given in Table 8. The shaded areas indicate when the input is permitted to change for predictable output performance. VOL and VOH are typical voltage output levels that occur with the output load. Table 8. Measurement points
Test data is given in Table 9. RT = termination resistance should be equal to output impedance Zo of the pulse generator. CL = load capacitance including jig and probe capacitance. Table 9. Test data
Nexperia 74AHC273; 74AHCT273 Octal D-type flip-flop with reset; positive-edge trigger 11. Package outline UNIT A max. A 1 A 2 A 3 b p c D (1) E (1) (1) e H E L L p Q Z y w v θ REFERENCES OUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches 2.65 0.3 0.1 2.45 2.25 0.49 0.36 0.32 0.23 13.0 12.6 7.6 7.4 1.27 10.65 10.00 1.1 1.0 0.9 0.4 8 o o 0.25 0.1 DIMENSIONS (inch dimensions are derived from the original mm dimensions) Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.1 0.4 SOT163-1 w M b p detail X Z e D y 0.25 075E04 MS-013 pin 1 index 0.1 0.012 0.004 0.096 0.089 0.019 0.014 0.013 0.009 0.51 0.49 0.30 0.29 0.05 1.4 0.055 0.419 0.394 0.043 0.039 0.035 0.016 0.01 0.25 0.01 0.004 0.043 0.016 0.01 0 5 10 mm scale X θ A A 1 A 2 H E L p Q E c L v M A (A ) 3 A SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1 99-12-27 03-02-19 Fig. 11. Package outline SOT163-1 (SO20) 74AHC_AHCT273 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 4 — 23 September 2020 11 / 16
Nexperia 74AHC273; 74AHCT273 Octal D-type flip-flop with reset; positive-edge trigger UNIT A 1 A 2 A 3 b p c D (1) E (2) (1) e H E L L p Q Z y w v θ REFERENCES OUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 6.6 6.4 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.5 0.2 o o 0.13 0.1 0.2 1 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 SOT360-1 MO-153 99-12-27 03-02-19 w M b p D Z e 0.25 1 10 20 11 pin 1 index θ A A 1 A 2 L p Q detail X L (A ) 3 H E E c v M A X A y 0 2.5 5 mm scale TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1 A max. 1.1 Fig. 12. Package outline SOT360-1 (TSSOP20) 74AHC_AHCT273 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 4 — 23 September 2020 12 / 16
Nexperia 74AHC273; 74AHCT273 Octal D-type flip-flop with reset; positive-edge trigger ReferencesOutline version European projection Issue date IEC JEDEC JEITA sot764-1_po 03-01-27 14-12-12 Unit mm max nom min 0.5 3.5 0.1 A(1) Dimensions (mm are the original dimensions) Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. A1 b 0.30 c D(1) Dh E(1) Eh 1.00 e e1 L 0.4 v w 0.05 y y1 1.15 0.5 detail X B A e e C yCy1 X AC Bv Cw scale A c L Eh Dh b 2 9 19 12 101 D E terminal 1 index area terminal 1 index area 0 5 mm2.5 DHVQFN20: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 20 terminals; body 2.5 x 4.5 x 0.85 mm SOT764-1 Fig. 13. Package outline SOT764-1 (DHVQFN20) 74AHC_AHCT273 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 4 — 23 September 2020 13 / 16
Table 10. Abbreviations Table 11. Revision history
- Legal texts have been adapted to the new company name where appropriate.
- Section 2 updated.
- Table 4: Derating values for Ptot total power dissipation have been updated.
- Package outline drawing of SOT764-1 (Fig. 13) updated. 74AHC_AHCT273 v.3 20080513 Product data sheet - 74AHC_AHCT273 v.2 Modifications: • The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors.
- Legal texts have been adapted to the new company name where appropriate.
- Table 6: the conditions for input leakage current have been changed. 74AHC_AHCT273 v.2 20030721 Product specification - 74AHC_AHCT273 v.1 74AHC_AHCT273 v.1 19990901 Product specification - - 74AHC_AHCT273 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 4 — 23 September 2020 14 / 16
Nexperia 74AHC273; 74AHCT273 Octal D-type flip-flop with reset; positive-edge trigger 14. Legal information Data sheet status Document status [1][2] Product status [3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term 'short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the internet at https://www.nexperia.com. Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet. Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia’s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. Right to make changes — Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — Nexperia products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Applications — Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). Nexperia does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nexperia.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of Nexperia products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific Nexperia product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. Nexperia accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without Nexperia’s warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond Nexperia’s specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies Nexperia for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond Nexperia’s standard warranty and Nexperia’s product specifications. Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 74AHC_AHCT273 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2020. All rights reserved Product data sheet Rev. 4 — 23 September 2020 15 / 16