74AHC259_08 NXP

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 17

Technical content

  1. General description The 74AHC259; 74AHCT259 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard No. 7-A. The 74AHC259; 74AHCT259 is a high-speed 8-bit addressable latch designed for general purpose storage applications in digital systems. It is a multifunctional device capable of storing single-line data in eight addressable latches and providing a 3-to-8 decoder and multiplexer function with active HIGH outputs (Q0 to Q7). It also incorporates an active LOW common reset ( MR) for resetting all latches as well as an active LOW enable input (LE). The 74AHC259; 74AHCT259 has four modes of operation:
  • In the addressable latch mode, data on the data line (D) is written into the addressed latch. The addressed latch will follow the data input with all non-addressed latches remaining in their previous states.
  • In the memory mode, all latches remain in their previous states and are unaffected by the data or address inputs.
  • In the 3-to-8 decoding or demultiplexing mode, the addressed output follows the state of the data input (D) with all other outputs in the LOW state.
  • In the reset mode, all outputs are LOW and unaffected by the address inputs (A0 to A2) and data input (D). When operating the 74AHC259; 74AHCT259 as an address latch, changing more than one bit of the address could impose a transient-wrong address. Therefore, this should only be done while in the memory mode. 2. Features n Balanced propagation delays n All inputs have Schmitt-trigger actions n Combines demultiplexer and 8-bit latch n Serial-to-parallel capability n Output from each storage bit available n Random (addressable) data entry n Easily expandable n Common reset input n Useful as a 3-to-8 active HIGH decoder n Inputs accept voltages higher than VCC 74AHC259; 74AHCT259 8-bit addressable latch Rev. 02 — 15 May 2008 Product data sheet

74AHC_AHCT259_2 © NXP B.V. 2008. All rights reserved. Table 1. Ordering information

74AHC_AHCT259_2 © NXP B.V. 2008. All rights reserved.

5.1 Pinning

5.2 Pin description

8 LATCHES

Table 2. Pin description

74AHC_AHCT259_2 © NXP B.V. 2008. All rights reserved. q = lower case letter indicates the state of the referenced input one set-up time prior to the LOW-to-HIGH transition. Table 2. Pin description …continued Table 3. Function table[1]

74AHC_AHCT259_2 © NXP B.V. 2008. All rights reserved. [1] H = HIGH voltage level; L = LOW voltage level. [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For SO16 packages: above 70°C the value of Ptot derates linearly at 8 mW/K. For TSSOP16 packages: above 60°C the value of Ptot derates linearly at 5.5 mW/K.

  1. Recommended operating conditions

Table 4. Operating mode select table[1] Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Table 6. Operating conditions

74AHC_AHCT259_2 © NXP B.V. 2008. All rights reserved. Table 7. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V).

74AHC_AHCT259_2 © NXP B.V. 2008. All rights reserved. Table 7. Static characteristics …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Table 8. Dynamic characteristics Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure11.

74AHC_AHCT259_2 © NXP B.V. 2008. All rights reserved. Table 8. Dynamic characteristics …continued Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure11.

74AHC_AHCT259_2 © NXP B.V. 2008. All rights reserved. [1] Typical values are measured at nominal supply voltage (VCC = 3.3 V and VCC = 5.0 V). [2] tpd is the same as tPLH and tPHL . [3] tpd is the same as tPHL only. [4] C PD is used to determine the dynamic power dissipation (PD inµW). L × VCC 2 × fo) = sum of the outputs. Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure11. Measurement points are given inTable9. VOL and VOH are typical voltage output levels that occur with the output load.

74AHC_AHCT259_2 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 02 — 15 May 2008 10 of 17 NXP Semiconductors 74AHC259; 74AHCT259 8-bit addressable latch Measurement points are given inTable9. VOL and VOH are typical voltage output levels that occur with the output load. Fig 6. Address input to output propagation delays 001aah122 An input Qn output tPHL tPLH GND VCC VM VM VOH VOL Measurement points are given inTable9. VOL and VOH are typical voltage output levels that occur with the output load. Fig 7. Enable input to output propagation delays and pulse width 001aah121 LE input Qn output tPHL tPLH tW VM VOH VCC GND VCC GND VOL VM D input Measurement points are given inTable9. VOL and VOH are typical voltage output levels that occur with the output load. Fig 8. Conditional reset input to output propagation delays 001aah124 MR input Qn output tPHL tW VM VOH VCC GND VOL VM

74AHC_AHCT259_2 © NXP B.V. 2008. All rights reserved. Measurement points are given inTable9. The shaded areas indicate when the input is permitted to change for predictable output performance. OL and VOH are typical voltage output levels that occur with the output load. Measurement points are given inTable9. The shaded areas indicate when the input is permitted to change for predictable output performance. OL and VOH are typical voltage output levels that occur with the output load. Table 9. Measurement points

74AHC_AHCT259_2 © NXP B.V. 2008. All rights reserved. Test data is given inTable10. T = termination resistance should be equal to output impedance Zo of the pulse generator. C L = load capacitance including jig and probe capacitance. Table 10. Test data

74AHC_AHCT259_2 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 02 — 15 May 2008 13 of 17 NXP Semiconductors 74AHC259; 74AHCT259 8-bit addressable latch 12. Package outline Fig 12. Package outline SOT109-1 (SO16) X w M q AA 1 A 2 bp D H E Lp Q detail X E Z e c L v M A (A )3 A y pin 1 index UNIT A max. A 1 A 2 A 3 bp cD (1) E (1) (1)eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 10.0 9.8 4.0 3.8 1.27 6.2 5.8 0.7 0.6 0.7 0.3 8 o o 0.25 0.1 DIMENSIONS (inch dimensions are derived from the original mm dimensions) Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.0 0.4 SOT109-1 99-12-27 03-02-19 076E07 MS-012 0.069 0.010 0.004 0.057 0.049 0.01 0.019 0.014 0.0100 0.0075 0.39 0.38 0.16 0.15 0.05 1.05 0.0410.244 0.228 0.028 0.020 0.028 0.0120.01 0.25 0.01 0.0040.039 0.016 0 2.5 5 mm scale SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

74AHC_AHCT259_2 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 02 — 15 May 2008 14 of 17 NXP Semiconductors 74AHC259; 74AHCT259 8-bit addressable latch Fig 13. Package outline SOT403-1 (TSSOP16) UNIT A 1 A 2 A 3 bp cD (1) E (2) (1)eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.40 0.06 o o0.13 0.10.21 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 SOT403-1 MO-153 99-12-27 03-02-18 w M bp D Z e 0.25 16 9 q AA 1 A 2 Lp Q detail X L (A )3 H E E c v M A XA y 0 2.5 5 mm scale TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1 A max. 1.1 pin 1 index

74AHC_AHCT259_2 © NXP B.V. 2008. All rights reserved. Table 11. Abbreviations Table 12. Revision history

  • The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors.
  • Legal texts have been adapted to the new company name where appropriate.
  • Table6: the conditions for input leakage current have been changed. 74AHC_AHCT259_1 20000314 Product specification - -

74AHC_AHCT259_2 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 02 — 15 May 2008 16 of 17 NXP Semiconductors 74AHC259; 74AHCT259 8-bit addressable latch 15. Legal information

15.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.

15.2 Definitions

Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.

15.3 Disclaimers

General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use —NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale —NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.

15.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 16. Contact information For more information, please visit:http://www.nxp.com For sales office addresses, please send an email to:salesaddresses@nxp.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.

NXP Semiconductors 74AHC259; 74AHCT259 8-bit addressable latch © NXP B.V. 2008. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 15 May 2008 Document identifier: 74AHC_AHCT259_2 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 17. Contents