74AHCT257 NEXPERIA
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 16
Technical content
- General description The 74AHC257; 74AHCT257 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard No. 7-A. The 74AHC257; 74AHCT257 has four identical 2-input multiplexers with 3-state outputs, which select 4 bits of data from two sources and are controlled by a common data select input (S). The data inputs from source 0 (1I0 to 4I0) are selected when input S is LOW and the data inputs from source 1 (1I1 to 4I1) are selected when input S is HIGH. Data appears at the outputs (1Y to 4Y) in true (non-inverting) form from the selected inputs. The 74AHC257; 74AHCT257 is the logic implementation of a 4-pole 2-position switch, where the position of the switch is determined by the logic levels applied to input S. The outputs are forced to a high-impedance OFF-state when OE is HIGH. The logic equations for the outputs are: 1Y = OE × (1I1× S + 1I0× S) 2Y =OE × (2I1× S + 2I0× S) 3Y =OE × (3I1× S + 3I0× S) 4Y =OE × (4I1× S + 4I0× S) The 74AHC257; 74AHCT257 is identical to the 74AHC258; 74AHCT258, but has non-inverting (true) outputs. 2. Features n Balanced propagation delays n All inputs have Schmitt-trigger actions n Non-inverting data path n Inputs accept voltages higher than VCC n Input levels: u For 74AHC257: CMOS level u For 74AHCT257: TTL level n ESD protection: u HBM EIA/JESD22-A114E exceeds 2000 V u MM EIA/JESD22-A115-A exceeds 200 V u CDM EIA/JESD22-C101C exceeds 1000 V n Multiple package options n Specified from−40 °C to +85°C and from−40 °C to +125°C 74AHC257; 74AHCT257 Quad 2-input multiplexer; 3-state Rev. 02 — 9 May 2008 Product data sheet
Table 1. Ordering information
74AHC_AHCT257_2 Product data sheet Rev. 02 — 9 May 2008 3 of 16 Nexperia 74AHC257; 74AHCT257 Quad 2-input multiplexer; 3-state Fig 2. Logic symbol Fig 3. IEC logic symbol mga835 S OE 1I0 1I1 2I0 2I1 3I0 3I1 4I0 4I1 001aad467 1 G1
1 MUX
Fig 4. Logic diagram 001aad468 S OE 1I0 1I1 2I0 2I1 3I0 3I1 4I0 4I1 © Nexperia B.V. 2017. All rights reserved
5.1 Pinning
5.2 Pin description
Table 2. Pin description
Z = high-impedance OFF-state. [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For SO16 packages: above 70°C the value of Ptot derates linearly at 8 mW/K. For TSSOP16 packages: above 60°C the value of Ptot derates linearly at 5.5 mW/K. Table 3. Function table[1] Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
- Recommended operating conditions
Table 5. Operating conditions Table 6. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Table 7. Dynamic characteristics Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure8.
[1] Typical values are measured at nominal supply voltage (VCC = 3.3 V and VCC = 5.0 V). [2] tpd is the same as tPLH and tPHL . [3] ten is the same as tPZL and tPZH . [4] tdis is the same as tPLZ and tPHZ . [5] C PD is used to determine the dynamic power dissipation (PD inµW). Σ(CL × VCC 2 × fo) = sum of the outputs. Voltages are referenced to GND (ground = 0 V); for test circuit seeFigure8.
Measurement points are given inTable8. VOL and VOH are typical voltage output levels that occur with the output load. Measurement points are given inTable8. VOL and VOH are typical voltage output levels that occur with the output load. Table 8. Measurement points
Test data is given inTable9. R T = termination resistance should be equal to output impedance Zo of the pulse generator. C L = load capacitance including jig and probe capacitance. Table 9. Test data
74AHC_AHCT257_2 Product data sheet Rev. 02 — 9 May 2008 12 of 16 Nexperia 74AHC257; 74AHCT257 Quad 2-input multiplexer; 3-state 12. Package outline Fig 9. Package outline SOT109-1 (SO16) X w M q AA 1 A 2 bp D H E Lp Q detail X E Z e c L v M A (A )3 A y pin 1 index UNIT A max. A 1 A 2 A 3 bp cD (1) E (1) (1)eH E LL p QZ y w v q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 10.0 9.8 4.0 3.8 1.27 6.2 5.8 0.7 0.6 0.7 0.3 8 o o 0.25 0.1 DIMENSIONS (inch dimensions are derived from the original mm dimensions) Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.0 0.4 SOT109-1 99-12-27 03-02-19 076E07 MS-012 0.069 0.010 0.004 0.057 0.049 0.01 0.019 0.014 0.0100 0.0075 0.39 0.38 0.16 0.15 0.05 1.05 0.0410.244 0.228 0.028 0.020 0.028 0.0120.01 0.25 0.01 0.0040.039 0.016 0 2.5 5 mm scale SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1 © Nexperia B.V. 2017. All rights reserved
74AHC_AHCT257_2 Product data sheet Rev. 02 — 9 May 2008 13 of 16 Nexperia 74AHC257; 74AHCT257 Quad 2-input multiplexer; 3-state Fig 10. Package outline SOT403-1 (TSSOP16) UNIT A 1 A 2 A 3 bp cD (1) E (2) (1)eH E LL p QZ y w v q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.40 0.06 o o0.13 0.10.21 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 SOT403-1 MO-153 99-12-27 03-02-18 w M bp D Z e 0.25 16 9 q AA 1 A 2 Lp Q detail X L (A )3 H E E c v M A XA y 0 2.5 5 mm scale TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1 A max. 1.1 pin 1 index © Nexperia B.V. 2017. All rights reserved
Table 10. Abbreviations Table 11. Revision history guidelines of NXP Semiconductors .
- Legal texts have been adapted to the new company name where appropriate.
- Table6: the conditions for input leakage current have been changed. 74AHC_AHCT257_1 20000403 Product specification - - © Nexperia B.V. 2017. All rights reserved
74AHC_AHCT257_2 Product data sheet Rev. 02 — 9 May 2008 15 of 16 Nexperia 74AHC257; 74AHCT257 Quad 2-input multiplexer; 3-state 15. Legal information
15.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www .nexperia.com .
15.2 Definitions
Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.
15.3 Disclaimers
General — Information in this document is believed to be accurate and reliable.However,Nexperiadoesnotgiveanyrepresentationsor warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —Nexperia reservestherighttomake changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — Nexperia products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia accepts no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — Nexperia products are sold subject to the general terms and conditions of commercial sale, as published athttp://www.nexperia.com /profi le/ter ms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by Nexperia. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.
15.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 16. Contact information For more information, please visit:http://www .nexperia.com For sales office addresses, please send an email to:salesaddresses@nexperia.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. © Nexperia B.V. 2017. All rights reserved
Nexperia 74AHC257; 74AHCT257 Quad 2-input multiplexer; 3-state 17. Contents © Nexperia B.V. 2017. All rights reserved For more information, please visit: http://www.nexperia.com For sales office addresses, please send an email to: salesaddresses@nexperia.com Date of release: