74AHC245 NXP
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 16
Technical content
- General description The 74AHC/AHCT245 is a high-speed Si-gate CMOS device. The 74AHC/AHCT245 is an octal transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The 74AHC245/74AHCT245 features an Output Enable (OE) input for easy cascading and a send/receive (DIR) input for direction control. OE controls the outputs so that the buses are effectively isolated. 2. Features ■ Balanced propagation delays ■ All inputs have a Schmitt-trigger action ■ Inputs accepts voltages higher than VCC ■ For 74AHC245 only: operates with CMOS input levels ■ For 74AHCT245 only: operates with TTL input levels ■ ESD protection: ◆ HBM JESD22-A114E exceeds 2000 V ◆ MM JESD22-A115-A exceeds 200 V ◆ CDM JESD22-C101C exceeds 1000 V ■ Multiple package options ■ Specified from−40 °C to +85°C and from−40 °C to +125°C 3. Ordering information 74AHC245; 74AHCT245 Octal bus transceiver; 3-state Rev. 03 — 25 September 2007 Product data sheet Table 1: Ordering information Type number Package Temperature range Name Description Version 74AHC245D −40 °C to +125°C SO20 plastic small outline package; 20 leads; body width 7.5 mm SOT163-1 74AHCT245D 74AHC245PW −40 °C to +125°C TSSOP20 plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1 74AHCT245PW 74AHC245BQ −40 °C to +125°C DHVQFN20 plastic dual-in-line compatible thermal enhanced very thin quad flat package no leads; 20 terminals; body 2.5× 4.5× 0.85 mm SOT764-1 74AHCT245BQ
74AHC_AHCT245_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 25 September 2007 2 of 16 NXP Semiconductors 74AHC245; 74AHCT245 Octal bus transceiver; 3-state 4. Functional diagram Fig 1. Logic symbol Fig 2. IEC logic symbol DIR OE mna174 173 164 155 146 137 128 119 3EN1 3EN2 mna175
74AHC_AHCT245_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 25 September 2007 3 of 16 NXP Semiconductors 74AHC245; 74AHCT245 Octal bus transceiver; 3-state 5. Pinning information
5.1 Pinning
5.2 Pin description
(1) The die substrate is attached to this pad using conductive die attach material. It can not be used as a supply pin or input. Fig 3. Pin configuration SO20, TSSOP20 Fig 4. Pin configuration DHVQFN20 245 DIR V CC A0 OE A1 B0 A2 B1 A3 B2 A4 B3 A5 B4 A6 B5 A7 B6 GND B7 001aac431 001aac432 245 GND (1) Transparent top view A5 B4 A4 B3 A3 B2 A2 B1 A1 B0 A0 OE GND DIR VCC 9 12 8 13 7 14 6 15 5 16 4 17 3 18 2 19 terminal 1 index area Table 2: Pin description Symbol Pin Description DIR 1 direction control A[0:7] 2, 3, 4, 5, 6, 7, 8, 9 data input/output B[0:7] 18, 17, 16, 15, 14, 13, 12, 11 data input/output GND 10 ground (0 V) OE 19 output enable input (active LOW) V CC 20 supply voltage
74AHC_AHCT245_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 25 September 2007 4 of 16 NXP Semiconductors 74AHC245; 74AHCT245 Octal bus transceiver; 3-state 6. Functional description [1] H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = high-impedance OFF-state. 7. Limiting values [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] Ptot derates linearly with 8 mW/K above 70°C. [3] Ptot derates linearly with 5.5 mW/K above 60°C. [4] Ptot derates linearly with 4.5 mW/K above 60°C. Table 3: Function table[1] Input Input/output OE DIR An Bn L L A = B input L H input B = A HXZZ Table 4: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Max Unit VCC supply voltage −0.5 +7.0 V VI input voltage −0.5 +7.0 V IIK input clamping current V I <−0.5 V [1] −20 - mA IOK output clamping current V O < −0.5 V or VO >V CC + 0.5 V [1] - ±20 mA IO output current V O =−0.5 V to (VCC + 0.5 V) - ±25 mA ICC supply current - 75 mA IGND ground current −75 - mA Tstg storage temperature −65 +150 °C Ptot total power dissipation T amb =−40 °C to +125°C SO20 package [2] - 500 mW TSSOP20 package [3] - 500 mW DHVQFN20 package [4] - 500 mW
74AHC_AHCT245_3 © NXP B.V. 2007. All rights reserved.
- Recommended operating conditions
Table 5. Recommended operating conditions Voltages are referenced to GND (ground = 0 V). Table 6. Static characteristics Voltages are referenced to GND (ground = 0 V).
74AHC_AHCT245_3 © NXP B.V. 2007. All rights reserved. Table 6. Static characteristics …continued Voltages are referenced to GND (ground = 0 V).
74AHC_AHCT245_3 © NXP B.V. 2007. All rights reserved. Table 7. Dynamic characteristics GND = 0 V. For test circuit seeFigure7.
74AHC_AHCT245_3 © NXP B.V. 2007. All rights reserved. [1] Typical values are measured at nominal supply voltage (VCC = 3.3 V and VCC = 5.0 V). [2] tpd is the same as tPLH and tPHL . ten is the same as tPZL and tPZH . tdis is the same as tPLZ and tPHZ . [3] C PD is used to determine the dynamic power dissipation PD (µW). VCC = supply voltage in Volts. Table 7. Dynamic characteristics …continued GND = 0 V. For test circuit seeFigure7. Measurement points are given inTable8. VOL and VOH are typical voltage output levels that occur with the output load.
74AHC_AHCT245_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 25 September 2007 9 of 16 NXP Semiconductors 74AHC245; 74AHCT245 Octal bus transceiver; 3-state Measurement points are given inTable8. VOL and VOH are typical voltage output levels that occur with the output load. Fig 6. enable and disable times mna367 tPLZ tPHZ outputs disabled outputs enabled VY VX outputs enabled output LOW-to-OFF OFF-to-LOW output HIGH-to-OFF OFF-to-HIGH OE input VI VOL VOH VCC VM GND GND tPZL tPZH VM VM Table 8: Measurement points Type Input Output VM VM VX VY 74AHC245 0.5V CC 0.5VCC VOL + 0.3 V V OH − 0.3 V 74AHCT245 1.5 V 0.5V CC VOL + 0.3 V V OH − 0.3 V
74AHC_AHCT245_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 25 September 2007 10 of 16 NXP Semiconductors 74AHC245; 74AHCT245 Octal bus transceiver; 3-state Test data is given inTable9. Definitions test circuit: R T = Termination resistance should be equal to output impedance Zo of the pulse generator C L = Load capacitance including jig and probe capacitance R L = Load resistor S1 = Test selection switch Fig 7. Load circuitry for switching times VM VM tW tW 10 % 90 % 0 V VI VI negative pulse positive pulse 0 V VM VM 90 % 10 % tf tr tr tf 001aad983 DUT VCC VCC VI VO R T R L S1 C L openPULSE GENERATOR Table 9: Test data Type Input Load S1 position VI tr, tf C L R L tPHL , tPLH tPZH , tPHZ tPZL , tPLZ 74AHC245 V CC 3.0 ns 15 pF , 50 pF 1 k Ω open GND V CC 74AHCT245 3.0 V 3.0 ns 15 pF , 50 pF 1 k Ω open GND V CC
74AHC_AHCT245_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 25 September 2007 11 of 16 NXP Semiconductors 74AHC245; 74AHCT245 Octal bus transceiver; 3-state 12. Package outline Fig 8. Package outline SOT163-1 (SO20) UNIT A max. A 1 A 2 A 3 bp cD (1) E (1) (1)eH E LL p Q Zywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches 2.65 0.3 0.1 2.45 2.25 0.49 0.36 0.32 0.23 13.0 12.6 7.6 7.4 1.27 10.65 10.00 1.1 1.0 0.9 0.4 8 o o 0.25 0.1 DIMENSIONS (inch dimensions are derived from the original mm dimensions) Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.1 0.4 SOT163-1 w M bp detail X Z e D y 0.25 075E04 MS-013 pin 1 index 0.1 0.012 0.004 0.096 0.089 0.019 0.014 0.013 0.009 0.51 0.49 0.30 0.29 0.05 1.4 0.0550.419 0.394 0.043 0.039 0.035 0.0160.01 0.25 0.01 0.0040.043 0.0160.01 0 5 10 mm scale X q AA 1 A 2 H E Lp Q E c L v M A (A )3 A SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1 99-12-27 03-02-19
74AHC_AHCT245_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 25 September 2007 12 of 16 NXP Semiconductors 74AHC245; 74AHCT245 Octal bus transceiver; 3-state Fig 9. Package outline SOT360-1 (TSSOP20) UNIT A 1 A 2 A 3 bp cD (1) E (2) (1)eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 6.6 6.4 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.5 0.2 o o0.13 0.10.21 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 SOT360-1 MO-153 99-12-27 03-02-19 w M bp D Z e 0.25 11 0 20 11 pin 1 index q AA 1 A 2 Lp Q detail X L (A )3 H E E c v M A XA y 0 2.5 5 mm scale TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1 A max. 1.1
74AHC_AHCT245_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 25 September 2007 13 of 16 NXP Semiconductors 74AHC245; 74AHCT245 Octal bus transceiver; 3-state Fig 10. Package outline SOT764-1 (DHVQFN20) terminal 1 index area 0.51 A 1 EhbUNIT ye 0.2 c REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 4.6 4.4 D h 3.15 2.85 2.6 2.4 1.15 0.85 3.50.30 0.18 0.05 0.00 0.05 0.1 DIMENSIONS (mm are the original dimensions) 0.5 0.3 L 0.1 v 0.05 w 0 2.5 5 mm scale SOT764-1 DHVQFN20: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 20 terminals; body 2.5 x 4.5 x 0.85 mm A (1) max. A c detail X yy1 Ce L Eh D h e b 19 12 101 X D E C B A terminal 1 index area AC C Bv M w M E (1) Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. D (1) 02-10-17 03-01-27
74AHC_AHCT245_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 25 September 2007 14 of 16 NXP Semiconductors 74AHC245; 74AHCT245 Octal bus transceiver; 3-state 13. Abbreviations 14. Revision history Table 10: Abbreviations Acronym Description CDM Charge Device Model CMOS Complementary Metal Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model TTL Transistor-Transistor Logic Table 11: Revision history Document ID Release date Data sheet status Change notice Doc. number Supersedes 74AHC_AHCT245_3 20070925 Product data sheet - 74AHC_AHCT245_2 Modifications:
- The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors.
- Legal texts have been adapted to the new company name when appropiate.
- Section3: DHVQFN20 package added.
- Section8: derating values added for DHVQFN20 package.
- Section12: outline drawing added for DHVQFN20 package. 74AHC_AHCT245_2 19990928 Product specification - 939775006297 74AHC_AHCT245_1 74AHC_AHCT245_1 19980921 Product specification - 939775004255 -
74AHC_AHCT245_3 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 03 — 25 September 2007 15 of 16 NXP Semiconductors 74AHC245; 74AHCT245 Octal bus transceiver; 3-state 15. Legal information
15.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
15.2 Definitions
Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.
15.3 Disclaimers
General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use —NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale —NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.
15.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 16. Contact information For additional information, please visit:http://www.nxp.com For sales office addresses, send an email to:salesaddresses@nxp.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
NXP Semiconductors 74AHC245; 74AHCT245 Octal bus transceiver; 3-state © NXP B.V. 2007. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 25 September 2007 Document identifier: 74AHC_AHCT245_3 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 17. Contents