74AHC1G08GW-G NXP

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

The AHC device has CMOS input switching levels and supply voltage range 2 V to 5.5 V. The AHCT device has TTL input switching levels and supply voltage range 4.5 V to 5.5 V. Table 1. Ordering information

74AHC_AHCT1G08_6 © NXP B.V. 2007. All rights reserved. [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For both TSSOP5 and SC-74A packages: above 87.5°C the value of Ptotderates linearly with 4.0 mW/K.

  1. Recommended operating conditions

Table 4. Function table Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Table 6. Recommended operating conditions Voltages are referenced to GND (ground = 0 V).

74AHC_AHCT1G08_6 © NXP B.V. 2007. All rights reserved. Table 7. Static characteristics Voltages are referenced to GND (ground = 0 V).

74AHC_AHCT1G08_6 © NXP B.V. 2007. All rights reserved. [1] tpd is the same as tPLH and tPHL . [2] Typical values are measured at VCC = 3.3 V. [3] Typical values are measured at VCC = 5.0 V. [4] C PD is used to determine the dynamic power dissipation PD (µW). Voltages are referenced to GND (ground = 0 V). Table 8. Dynamic characteristics GND = 0 V; tr = tf =≤ 3.0 ns. For test circuit seeFigure6.

74AHC_AHCT1G08_6 © NXP B.V. 2007. All rights reserved. Product data sheet 7 of 11 NXP Semiconductors 74AHC1G08; 74AHCT1G08 2-input AND gate 13. Package outline Fig 7. Package outline SOT353-1 (TSSOP5) UNIT A 1 A max. A 2 A 3 bp LH E Lp wyvce D (1) E(1) Z(1) q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION IEC JEDEC JEITA mm 0.1 1.0 0.8 0.30 0.15 0.25 0.08 2.25 1.85 1.35 1.15 0.65 1.3 2.25 2.0 0.60 0.15 0°0.1 0.10.30.425 DIMENSIONS (mm are the original dimensions) Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 0.46 0.21 SOT353-1 MO-203 SC-88A w Mbp D Z e 0.15 5 4 q AA2 Lp (A3) detail X L H E E c v M A X A y 1.5 3 mm0 scale TSSOP5: plastic thin shrink small outline package; 5 leads; body width 1.25 mm SOT353-1 1.1

74AHC_AHCT1G08_6 © NXP B.V. 2007. All rights reserved. Product data sheet 8 of 11 NXP Semiconductors 74AHC1G08; 74AHCT1G08 2-input AND gate Fig 8. Package outline SOT753 (SC-74A) REFERENCESOUTLINE VERSION EUROPEAN PROJECTION IEC JEDEC JEITA SOT753 SC-74A wB Mbp D e A Lp Q detail X H E E v M A AB y 0 1 2 mm scale c X 13 2 Plastic surface-mounted package; 5 leads SOT753 UNIT A 1 bp cD E H E Lp Qy wv mm 0.100 0.013 0.40 0.25 3.1 2.7 0.26 0.10 1.7 1.3 e 0.95 3.0 2.5 0.2 0.10.2 DIMENSIONS (mm are the original dimensions) 0.6 0.2 0.33 0.23 A 1.1 0.9