Download PDF74AHC1G04 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 16
Technical content
Product specification Supersedes data of 2002 May 27
2003 Sep 04
74AHC1G04; 74AHCT1G04 Inverter
2003 Sep 04 2
Philips Semiconductors Product specification Inverter 74AHC1G04; 74AHCT1G04
FEATURES
- Symmetrical output impedance
- High noise immunity
- ESD protection: – HBM EIA/JESD22-A114-A exceeds 2000 V – MM EIA/JESD22-A115-A exceeds 200 V – CDM EIA/JESD22-C101 exceeds 1000 V.
- Low power dissipation
- Balanced propagation delays
- Very small 5-pin package
- Specified from−40 to +85°C and −40 to +125°C.
DESCRIPTION
The 74AHC1G04/74AHCT1G04 are high-speed Si-gate CMOS devices. The 74AHC1G04/74AHCT1G04 provides the inverting buffer. QUICK REFERENCE DATA GND = 0 V; T amb =2 5°C; tr =tf≤ 3.0 ns. Notes 1. C PD is used to determine the dynamic power dissipation (PD inµW). PD =C PD × VCC 2 × fi× N+ ∑ (CL × VCC 2 × fo) where: fi= input frequency in MHz; fo = output frequency in MHz; C L = output load capacitance in pF; VCC = supply voltage in Volts; N = total load switching outputs; ∑ (C L × VCC 2 × fo) = sum of outputs. 2. The condition is VI= GND to VCC . SYMBOL PARAMETER CONDITIONS TYPICAL UNIT 74AHC1G04 74AHCT1G04 tPHL /tPLH propagation delay input A to output Y CL = 15 pF; VCC = 5 V 3.1 3.4 ns C I input capacitance 1.5 1.5 pF C PD power dissipation capacitance C L = 50 pF; f = 1 MHz; notes 1 and 2 15 16 pF
2003 Sep 04 3
Philips Semiconductors Product specification Inverter 74AHC1G04; 74AHCT1G04 FUNCTION TABLE See note 1. Note 1. H = HIGH voltage level; L = LOW voltage level. ORDERING AND PACKAGE INFORMATION PINNING INPUT OUTPUT AY LH HL TYPE NUMBER PACKAGES TEMPERATURE RANGE PINS PACKAGE MATERIAL CODE MARKING 74AHC1G04GW −40 to +125°C 5 SC-88A plastic SOT353 AC 74AHCT1G04GW −40 to +125°C 5 SC-88A plastic SOT353 CC 74AHC1G04GV −40 to +125°C 5 SC-74A plastic SOT753 A04 74AHCT1G04GV −40 to +125°C 5 SC-74A plastic SOT753 C04 PIN SYMBOL DESCRIPTION 1 n.c. not connected
2 A data input A
3 GND ground (0 V)
4 Y data output Y
Fig.1 Pin configuration. handbook, halfpage MNA107 VCC A YGND n.c. Fig.2 Logic symbol. handbook, halfpage MNA108 AY2 4
2003 Sep 04 4
Philips Semiconductors Product specification Inverter 74AHC1G04; 74AHCT1G04 Fig.3 IEC logic symbol. handbook, halfpage MNA109 412 Fig.4 Logic diagram. handbook, halfpage MNA110 A Y RECOMMENDED OPERATING CONDITIONS LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V). Note 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. SYMBOL PARAMETER CONDITIONS 74AHC1G04 74AHCT1G04 UNIT VI input voltage 0 − 5.5 0 − 5.5 V VO output voltage 0 − VCC 0 − VCC V Tamb operating ambient temperature see DC and AC characteristics per device −40 +25 +125 −40 +25 +125 °C tr,tf (Δt/Δf) input rise and fall times VCC = 3.3±0.3 V −− 100 −−− ns/V SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC supply voltage −0.5 +7.0 V VI input voltage −0.5 +7.0 V IIK input diode current V I< −0.5 V −− 20 mA IOK output diode current V O < −0.5 or VO >V CC + 0.5 V; note 1−± 20 mA IO output source or sink current −0.5 V < VO <V CC + 0.5 V −± 25 mA ICC , IGND VCC or GND current −± 75 mA Tstg storage temperature −65 +150 °C PD power dissipation T amb = −40 to +125°C − 250 mW
2003 Sep 04 5
Philips Semiconductors Product specification Inverter 74AHC1G04; 74AHCT1G04 DC CHARACTERISTICS Type 74AHC1G04 At recommended operating conditions; voltages are referenced to GND (ground=0V ) . SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) Tamb =2 5°C VIH HIGH-level input voltage 2.0 1.5 −− V 3.0 2.1 −− V 5.5 3.85 −− V VIL LOW-level input voltage 2.0 −− 0.5 V 3.0 −− 0.9 V 5.5 −− 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 2.0 − V IO = −50 µA 3.0 2.9 3.0 − V IO = −50 µA 4.5 4.4 4.5 − V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 − 0 0.1 V IO =5 0µA 3.0 − 0 0.1 V IO =5 0µA 4.5 − 0 0.1 V IO = 4.0 mA 3.0 −− 0.36 V IO = 8.0 mA 4.5 −− 0.36 V ILI input leakage current VI=V CC or GND 5.5 −− 0.1 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 10 µA C I input capacitance −− 1.5 10 pF
2003 Sep 04 6
Philips Semiconductors Product specification Inverter 74AHC1G04; 74AHCT1G04 Tamb = −40 to +85°C VIH HIGH-level input voltage 2.0 1.5 −− V 3.0 2.1 −− V 5.5 3.85 −− V VIL LOW-level input voltage 2.0 −− 0.5 V 3.0 −− 0.9 V 5.5 −− 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 −− V IO = −50 µA 3.0 2.9 −− V IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 −− 0.1 V IO =5 0µA 3.0 −− 0.1 V IO =5 0µA 4.5 −− 0.1 V IO = 4.0 mA 3.0 −− 0.44 V IO = 8.0 mA 4.5 −− 0.44 V ILI input leakage current VI=V CC or GND 5.5 −− 1.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 10 µA C I input capacitance −− − 10 pF SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)
2003 Sep 04 7
Philips Semiconductors Product specification Inverter 74AHC1G04; 74AHCT1G04 Tamb = −40 to +125°C VIH HIGH-level input voltage 2.0 1.5 −− V 3.0 2.1 −− V 5.5 3.85 −− V VIL LOW-level input voltage 2.0 −− 0.5 V 3.0 −− 0.9 V 5.5 −− 1.65 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 2.0 1.9 −− V IO = −50 µA 3.0 2.9 −− V IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 2.0 −− 0.1 V IO =5 0µA 3.0 −− 0.1 V IO =5 0µA 4.5 −− 0.1 V IO = 4.0 mA 3.0 −− 0.55 V IO = 8.0 mA 4.5 −− 0.55 V ILI input leakage current VI=V CC or GND 5.5 −− 2.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 40 µA C I input capacitance −− − 10 pF SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)
2003 Sep 04 8
Philips Semiconductors Product specification Inverter 74AHC1G04; 74AHCT1G04 Type 74AHCT1G04 At recommended operating conditions; voltages are referenced to GND (ground=0V ) . SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V) Tamb =2 5°C VIH HIGH-level input voltage 4.5 to 5.5 2.0 −− V VIL LOW-level input voltage 4.5 to 5.5 −− 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 4.5 − V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 − 0 0.1 V IO = 8.0 mA 4.5 −− 0.36 V ILI input leakage current V I=V IH or VIL 5.5 −− 0.1 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 1.0 µA ΔICC additional quiescent supply current per input pin VI= 3.4 V; other inputs at VCC or GND; IO =0 5.5 −− 1.35 mA C I input capacitance − 1.5 10 pF Tamb = −40 to +85°C VIH HIGH-level input voltage 4.5 to 5.5 2.0 −− V VIL LOW-level input voltage 4.5 to 5.5 −− 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 −− 0.1 V IO = 8.0 mA 4.5 −− 0.44 V ILI input leakage current V I=V IH or VIL 5.5 −− 1.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 10 µA ΔICC additional quiescent supply current per input pin VI= 3.4 V; other inputs at VCC or GND; IO =0 5.5 −− 1.5 mA C I input capacitance −− − 10 pF
2003 Sep 04 9
Philips Semiconductors Product specification Inverter 74AHC1G04; 74AHCT1G04 Tamb = −40 to +125°C VIH HIGH-level input voltage 4.5 to 5.5 2.0 −− V VIL LOW-level input voltage 4.5 to 5.5 −− 0.8 V VOH HIGH-level output voltage VI=V IH or VIL IO = −50 µA 4.5 4.4 −− V VOL LOW-level output voltage VI=V IH or VIL IO =5 0µA 4.5 −− 0.1 V IO = 8.0 mA 4.5 −− 0.55 V ILI input leakage current V I=V IH or VIL 5.5 −− 2.0 µA ICC quiescent supply current VI=V CC or GND; IO = 0 5.5 −− 40 µA ΔICC additional quiescent supply current per input pin VI= 3.4 V; other inputs at VCC or GND; IO =0 5.5 −− 1.5 mA C I input capacitance −− − 10 pF SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT OTHER V CC (V)
2003 Sep 04 10
Philips Semiconductors Product specification Inverter 74AHC1G04; 74AHCT1G04 AC CHARACTERISTICS Type 74AHC1G04 GND = 0 V; tr =tf≤ 3.0 ns. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF) V CC (V) Tamb =2 5°C tPHL /tPLH propagation delay input A to output Y see Figs 5 and 6 15 3.0 to 3.6 −− 7.1 ns 3.3 − 4.3 − ns 5 − 3.1 − ns 50 3.0 to 3.6 −− 10.6 ns 3.3 − 6.1 − ns 5 − 4.5 − ns Tamb = −40 to +85°C tPHL /tPLH propagation delay input A to output Y see Figs 5 and 6 15 3.0 to 3.6 1.0 − 8.5 ns 4.5 to 5.5 1.0 − 6.5 ns 50 3.0 to 3.6 1.0 − 12 ns 4.5 to 5.5 1.0 − 8.5 ns Tamb = −40 to +125°C tPHL /tPLH propagation delay input A to output Y see Figs 5 and 6 15 3.0 to 3.6 1.0 − 11.0 ns 4.5 to 5.5 1.0 − 7.0 ns 50 3.0 to 3.6 1.0 − 14.5 ns 4.5 to 5.5 1.0 − 9.5 ns
2003 Sep 04 11
Philips Semiconductors Product specification Inverter 74AHC1G04; 74AHCT1G04 Type 74AHCT1G04 GND = 0 V; tr =tf≤ 3.0 ns. SYMBOL PARAMETER TEST CONDITIONS MIN. TYP. MAX. UNIT WAVEFORMS C L (pF) V CC (V) Tamb =2 5°C tPHL /tPLH propagation delay input A to output Y see Figs 5 and 6 15 4.5 to 5.5 −− 6.7 ns 5 − 3.4 − ns 50 4.5 to 5.5 −− 7.7 ns 5 − 4.9 − ns Tamb = −40 to +85° tPHL /tPLH propagation delay input A to output Y see Figs 5 and 6 15 4.5 to 5.5 1.0 − 7.5 ns 50 4.5 to 5.5 1.0 − 8.5 ns Tamb = −40 to +125°C tPHL /tPLH propagation delay input A to output Y see Figs 5 and 6 15 4.5 to 5.5 1.0 − 8.5 ns 50 4.5 to 5.5 1.0 − 10.0 ns
2003 Sep 04 12
Philips Semiconductors Product specification Inverter 74AHC1G04; 74AHCT1G04 AC WAVEFORMS Fig.5 Input (A) to output (Y) propagation delays. handbook, halfpage MNA111 A input Y output tPHL tPLH VM VM TYPE VI INPUT REQUIREMENTS VM INPUT VM OUTPUT 74AHC1G04 GND to V CC 50% V CC 50% V CC 74AHCT1G04 GND to 3.0 V 1.5 V 50% V CC Fig.6 Load circuitry for switching times. Definitions for test circuit: C L = load capacitance including jig and probe capacitance (see Chapter “AC characteristics”). R T = termination resistance should be equal to the output impedance Z0 of the pulse generator. handbook, halfpage VCC VI VO MNA101 D.U.T. C LR T PULSE GENERATOR
2003 Sep 04 13
Philips Semiconductors Product specification Inverter 74AHC1G04; 74AHCT1G04 PACKAGE OUTLINES REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC EIAJ SOT353 wB Mbp D e A Lp Q detail X H E E v M A AB y 0 1 2 mm scale c X 13 2 Plastic surface mounted package; 5 leads SOT353 UNIT A 1 max bp cD E (2) e1 H E Lp Qy wv mm 0.1 0.30 0.20 2.2 1.8 0.25 0.10 1.35 1.15 0.65 e 1.3 2.2 2.0 0.2 0.10.2 DIMENSIONS (mm are the original dimensions) 0.45 0.15 0.25 0.15 A 1.1 0.8 97-02-28SC-88A
2003 Sep 04 14
Philips Semiconductors Product specification Inverter 74AHC1G04; 74AHCT1G04 REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT753 SC-74A wB Mbp D e A Lp Q detail X H E E v M A AB y 0 1 2 mm scale c X 13 2 Plastic surface mounted package; 5 leads SOT753 UNIT A 1 bp cD E H E Lp Qy wv mm 0.100 0.013 0.40 0.25 3.1 2.7 0.26 0.10 1.7 1.3 e 0.95 3.0 2.5 0.2 0.10.2 DIMENSIONS (mm are the original dimensions) 0.6 0.2 0.33 0.23 A 1.1 0.9 02-04-16
2003 Sep 04 15
Philips Semiconductors Product specification Inverter 74AHC1G04; 74AHCT1G04 DATA SHEET STATUS Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. LEVEL DATA SHEET STATUS (1) PRODUCT STATUS (2)(3) DEFINITION I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
© Koninklijke Philips Electronics N.V. 2003 SCA75 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 Printed in The Netherlands R44/06/pp16 Date of release:2003 Sep 04 Document order number: 9397 750 11919