74AHC157 NXP
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 16
Technical content
- General description The 74AHC/AHCT157 are high-speed Si-gate CMOS devices and are pin compatible with Low Power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74AHC/AHCT157 are quad 2-input multiplexer which select 4 bits of data from two sources under the control of a common data select input (S). The enable input ( E) is active LOW. WhenE is HIGH, all of the outputs (1Y to 4Y) are forced LOW regardless of all other input conditions. Moving the data from two groups of registers to four common output buses is a common use of the 74AHC/AHCT157. The state of the common data select input (S) determines the particular register from which the data comes. It can also be used as function generator. The device is useful for implementing highly irregular logic by generating any four of the 16 different functions of two variables with one variable common. The 74AHC/AHCT157 is logic implementation of a 4-pole, 2-position switch, where the position of the switch is determine by the logic levels applied to S. The logic equations are: 1Y = The 74AHC/AHCT157 is identical to the 74AHC/AHCT158 but has non-inverting (true) outputs. 2. Features ■ Balanced propagation delays ■ All inputs have a Schmitt-trigger action ■ Inputs accepts voltages higher than VCC ■ Multiple input enable for easy expansion ■ Ideal for memory chip select decoding ■ For 74AHC157 only: operates with CMOS input levels ■ For 74AHCT157 only: operates with TTL input levels ■ ESD protection: ◆ HBM JESD22-A114E exceeds 2000 V ◆ MM JESD22-A115-A exceeds 200 V ◆ CDM JESD22-C101C exceeds 1000 V 74AHC157; 74AHCT157 Quad 2-input multiplexer Rev. 02 — 9 November 2007 Product data sheet
74AHC_AHCT157_2 © NXP B.V. 2007. All rights reserved. Table 1. Ordering information
74AHC_AHCT157_2 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 02 — 9 November 2007 3 of 16 NXP Semiconductors 74AHC157; 74AHCT157 Quad 2-input multiplexer 5. Pinning information
5.1 Pinning
Fig 3. Logic symbol Fig 4. IEC logic symbol mna483 MULTIPLEXER OUTPUTSSELECTOR S 151 E 1I0 1I1 2I0 2I1 3I0 3I1 4I0 4I1 mna482 1 G1 15 EN
1 MUX
(1) The die substrate is attached to this pad using conductive die attach material. It can not be used as a supply pin or input. Fig 5. Pin configuration SO16, TSSOP16 Fig 6. Pin configuration DHVQFN16 74AHC157 74AHCT157 SV CC 1I0 E 1I1 4I0 1Y 4I1 2I0 4Y 2I1 3I0 2Y 3I1 GND 3Y 001aah066 001aac931 157 2Y 3I1 2I1 3I0 2I0 4Y GND (1) 1Y 4I1 1I1 4I0 1I0 E GND S VCC Transparent top view 7 10 6 11 5 12 4 13 3 14 2 15 terminal 1 index area
74AHC_AHCT157_2 © NXP B.V. 2007. All rights reserved.
5.2 Pin description
Table 2. Pin description Table 3. Function table[1]
74AHC_AHCT157_2 © NXP B.V. 2007. All rights reserved. [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] Ptotderates linearly with 8 mW/K above 70°C. [3] Ptot derates linearly with 5.5 mW/K above 60°C. [4] Ptot derates linearly with 4.5 mW/K above 60°C.
- Recommended operating conditions
Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Table 5. Recommended operating conditions Voltages are referenced to GND (ground = 0 V).
74AHC_AHCT157_2 © NXP B.V. 2007. All rights reserved. Table 6. Static characteristics Voltages are referenced to GND (ground = 0 V).
74AHC_AHCT157_2 © NXP B.V. 2007. All rights reserved. Table 6. Static characteristics …continued Voltages are referenced to GND (ground = 0 V). Table 7. Dynamic characteristics GND = 0 V; For test circuit seeFigure9.
74AHC_AHCT157_2 © NXP B.V. 2007. All rights reserved. [1] Typical values are measured at nominal supply voltage (VCC = 3.3 V and VCC = 5.0 V). [2] tpd is the same as tPLH and tPHL . [3] C PD is used to determine the dynamic power dissipation PD (µW). VCC = supply voltage in Volts. Table 7. Dynamic characteristics …continued GND = 0 V; For test circuit seeFigure9.
74AHC_AHCT157_2 © NXP B.V. 2007. All rights reserved. Measurement points are given inTable8. VOL and VOH are typical voltage output levels that occur with the output load. Measurement points are given inTable8. VOL and VOH are typical voltage output levels that occur with the output load. Table 8. Measurement points
74AHC_AHCT157_2 © NXP B.V. 2007. All rights reserved. Test data is given inTable9. Table 9. Test data
74AHC_AHCT157_2 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 02 — 9 November 2007 11 of 16 NXP Semiconductors 74AHC157; 74AHCT157 Quad 2-input multiplexer 12. Package outline Fig 10. Package outline SOT109-1 (SO16) X w M q AA 1 A 2 bp D H E Lp Q detail X E Z e c L v M A (A )3 A y pin 1 index UNIT A max. A 1 A 2 A 3 bp cD (1) E (1) (1)eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm inches 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 10.0 9.8 4.0 3.8 1.27 6.2 5.8 0.7 0.6 0.7 0.3 8 o o 0.25 0.1 DIMENSIONS (inch dimensions are derived from the original mm dimensions) Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 1.0 0.4 SOT109-1 99-12-27 03-02-19 076E07 MS-012 0.069 0.010 0.004 0.057 0.049 0.01 0.019 0.014 0.0100 0.0075 0.39 0.38 0.16 0.15 0.05 1.05 0.0410.244 0.228 0.028 0.020 0.028 0.0120.01 0.25 0.01 0.0040.039 0.016 0 2.5 5 mm scale SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1
74AHC_AHCT157_2 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 02 — 9 November 2007 12 of 16 NXP Semiconductors 74AHC157; 74AHCT157 Quad 2-input multiplexer Fig 11. Package outline SOT403-1 (TSSOP16) UNIT A 1 A 2 A 3 bp cD (1) E (2) (1)eH E LL p QZ ywv q REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 0.15 0.05 0.95 0.80 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.2 0.4 0.3 0.40 0.06 o o0.13 0.10.21 DIMENSIONS (mm are the original dimensions) Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. 0.75 0.50 SOT403-1 MO-153 99-12-27 03-02-18 w M bp D Z e 0.25 16 9 q AA 1 A 2 Lp Q detail X L (A )3 H E E c v M A XA y 0 2.5 5 mm scale TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1 A max. 1.1 pin 1 index
74AHC_AHCT157_2 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 02 — 9 November 2007 13 of 16 NXP Semiconductors 74AHC157; 74AHCT157 Quad 2-input multiplexer Fig 12. Package outline SOT763-1 (DHVQFN16) terminal 1 index area 0.51 A 1 EhbUNIT ye 0.2 c REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA mm 3.6 3.4 D h 2.15 1.85 2.6 2.4 1.15 0.85 2.50.30 0.18 0.05 0.00 0.05 0.1 DIMENSIONS (mm are the original dimensions) 0.5 0.3 L 0.1 v 0.05 w 0 2.5 5 mm scale SOT763-1 DHVQFN16: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 16 terminals; body 2.5 x 3.5 x 0.85 mm A (1) max. A c detail X yy1 Ce L Eh D h e b 15 10 X D E C B A terminal 1 index area AC C Bv M w M E (1) Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. D (1) 02-10-17 03-01-27
74AHC_AHCT157_2 © NXP B.V. 2007. All rights reserved. Table 10. Abbreviations Table 11. Revision history
- The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors.
- Legal texts have been adapted to the new company name where appropriate.
- Section3: DHVQFN16 package added.
- Section8: derating values added for DHVQFN16 package.
- Section12: outline drawing added for DHVQFN16 package. 74AHC_AHCT157_1 19990924 Product specification - -
74AHC_AHCT157_2 © NXP B.V. 2007. All rights reserved. Product data sheet Rev. 02 — 9 November 2007 15 of 16 NXP Semiconductors 74AHC157; 74AHCT157 Quad 2-input multiplexer 15. Legal information
15.1 Data sheet status
[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
15.2 Definitions
Draft —The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet —A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail.
15.3 Disclaimers
General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes —NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use —NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications —Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values —Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale —NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license —Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights.
15.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 16. Contact information For additional information, please visit:http://www.nxp.com For sales office addresses, send an email to:salesaddresses@nxp.com Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.
NXP Semiconductors 74AHC157; 74AHCT157 Quad 2-input multiplexer © NXP B.V. 2007. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 9 November 2007 Document identifier: 74AHC_AHCT157_2 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 17. Contents