TC74ACT74P_V01 TOSHIBA
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 11
Technical content
Features
- High speed: fmax = 180 MHz (typ.) at VCC = 5 V
- Low power dissipation: ICC = 4 µA (max) at Ta = 25°C
- Compatible with TTL outputs: V IL = 0.8 V (max) V IH = 2.0 V (min)
- Symmetrical output impedance: |I OH| = IOL = 24 mA (min) Capability of driving 50 Ω transmission lines.
- Balanced propagation delays: tpLH ∼ − tpHL
- Pin and function compatible with 74F74 Weight DIP14-P-300-2.54 : 0.96 g (typ.) SOP14-P-300-1.27A : 0.18 g (typ.) SOP14-P-300-1.27 : 0.18 g (typ.) SOL14-P-150-1.27 : 0.12 g (typ.) TSSOP14-P-0044-0.65A : 0.06 g (typ.) Note: xxxFN (JEDEC SOP) is not available in Japan. TC74ACT74P TC74ACT74F TC74ACT74FN TC74ACT74FT
Pin Assignment IEC Logic Symbol Truth Table Inputs Outputs CLR PR D CK Q Q Function L H X X L H Clear H L X X H L Preset L L X X H H ― H H L L H ― H H H H L ― H H X Q n nQ No Change X: Don’t care System Diagram PR1 VCC CLR2 2CK PR2 CLR1 1CK CK Q D Q CK Q D Q (top view) GND CLR2 CLR1 (12) (3) S (4) (1) (2) (11) (10) 1CK PR1 2CK (5) (6) (9) (8) R (13) PR2 D CLR CK PR Q 6/8 Q 5/9 φ ϕ 3/11 φ ϕ φ ϕ
Absolute Maximum Ratings (Note 1) Characteristics Symbol Rating Unit Supply voltage range V CC −0.5 to 7.0 V DC input voltage V IN −0.5 to VCC + 0.5 V DC output voltage V OUT −0.5 to VCC + 0.5 V Input diode current I IK ±20 mA Output diode current I OK ±50 mA DC output current I OUT ±50 mA DC VCC/ground current I CC ±100 mA Power dissipation P D 500 (DIP) (Note 2)/180 (SOP/TSSOP) mW Storage temperature T stg −65 to 150 °C Note1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Note2: 500 mW in the range of Ta = −40°C to 65°C. From Ta = 65°C to 85°C a derating factor of −10 mW/°C should be applied up to 300 mW. Recommended Operating Conditions (Note) Characteristics Symbol Rating Unit Supply voltage V CC 4.5 to 5.5 V Input voltage V IN 0 to VCC V Output voltage V OUT 0 to VCC V Operating temperature T opr −40 to 85 °C Input rise and fall time dt/dV 0 to 10 ns/V Note: The recommended operating conditions are required to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND.
Electrical Characteristics
Test Condition Ta = 25°C Ta = −40 to 85°C Characteristics Symbol VCC (V) Min Typ. Max Min Max Unit High-level input voltage VIH ― 4.5 to 5.5 2.0 ― ― 2.0 ― V Low-level input voltage VIL ― 4.5 to 5.5 ― ― 0.8 ― 0.8 V High-level output voltage VOH VIN = VIH or VIL IOH = −50 µA IOH = −24 mA IOH = −75 mA (Note) 4.5 4.5 5.5 4.4 3.94 4.5 4.4 3.80 3.85 V Low-level output voltage VOL VIN = VIH or VIL IOL = 50 µA IOL = 24 mA IOL = 75 mA (Note) 4.5 4.5 5.5 0.0 0.1 0.36 0.1 0.44 1.65 V Input leakage current IIN VIN = VCC or GND 5.5 ― ― ±0.1 ― ±1.0 µA ICC VIN = VCC or GND 5.5 ― ― 4.0 ― 40.0 µA Quiescent supply current IC Per input: VIN = 3.4 V Other input: VCC or GND Note: This spec indicates the capability of driving 50 Ω transmission lines. One output should be tested at a time for a 10 ms maximum duration. Timing Requirements (input: tr = tf = 3 ns) Test Condition Ta = 25°C Ta = −40 to 85°C Characteristics Symbol VCC (V) Limit Limit Unit Minimum pulse width (CK) tw (L) tw (H) Minimum pulse width ( CLR , PR ) Minimum set-up time t s ― 5.0 ± 0.5 3.5 3.5 ns Minimum hold time t h ― 5.0 ± 0.5 1.5 1.5 ns Minimum removal time ( CLR , PR ) trem ― 5.0 ± 0.5 2.0 2.0 ns
AC Characteristics (CL = 50 pF, RL = 500 Ω, input: tr = tf = 3 ns) Test Condition Ta = 25°C Ta = −40 to 85°C Characteristics Symbol V CC (V) Min Typ. Max Min Max Unit Propagation delay time (CK-Q, Q) tpLH tpHL Propagation delay time ( CLR , PR -Q, Q) tpLH tpHL Maximum clock frequency fmax ― 5.0 ± 0.5 95 160 ― 95 ― MHz Input capacitance C IN ― ― 5 10 ― 10 pF Power dissipation capacitance CPD (Note) ― 35 ― ― ― pF Note: C PD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD·VCC·fIN + ICC/2 (per F/F)
Weight: 0.96 g (typ.)
Weight: 0.18 g (typ.)
Weight: 0.18 g (typ.)
Package Dimensions (Note) Note: This package is not available in Japan. Weight: 0.12 g (typ.)
Weight: 0.06 g (typ.)
Note: Lead (Pb)-Free Packages DIP14-P-300-2.54 SOP14-P-300-1.27A SOL14-P-150-1.27 TSSOP14-P-0044-0.65A RESTRICTIONS ON PRODUCT USE 060116EBA
- The information contained herein is subject to change without notice. 021023_D
- TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utiliz ing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handli ng Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. 021023_A
- The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. 021023_B
- The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. 060106_Q
- The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. 021023_C
- The products described in this document are subject to the foreign exchange and foreign trade laws. 021023_E