74AC175 FAIRCHILD
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 12
Technical content
Features
I CC reduced by 50% Edge-triggered D-type inputs Buffered positive edge-triggered clock Asynchronous common reset True and complement output Outputs source/sink 24mA ACT175 has TTL-compatible inputs General Description The AC/ACT175 is a high-speed quad D-type flip-flop. The device is useful for general flip-flop requirements where clock and clear inputs are common. The informa- tion on the D-type inputs is stored during the LOW-to- HIGH clock transition. Both true and complemented out- puts of each flip-flop are provided. A Master Reset input resets all flip-flops, independent of the Clock or D-type inputs, when LOW.
Ordering Information
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. Connection Diagram Pin Descriptions Order Number Package Number Package Description 74AC175SC M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Body 74AC175SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74AC175MTC MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74AC175PC N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide 74ACT175SC M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Body 74ACT175SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74ACT175MTC MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Pin Names Description D Data Inputs CP Clock Pulse Input MR Master Reset Input Q True Outputs Q Complement Outputs FACT™ is a trademark of Fairchild Semiconductor Corporation.
74AC175, 74ACT175 Quad D-Type Flip-Flop ©1988 Fairchild Semiconductor Corporation www.fairchildsemi.com 74AC175, 74ACT175 Rev. 1.4 2 Logic Symbol IEEE/IEC Functional Description The AC/ACT175 consists of four edge-triggered D-type flip-flops with individual D inputs and Q and Q outputs. The Clock and Master Reset are common. The four flip- flops will store the state of their individual D inputs on the LOW-to-HIGH clock (CP) transition, causing individual Q and Q outputs to follow. A LOW input on the Master Reset (MR) will force all Q outputs LOW and Q outputs HIGH independent of Clock or Data inputs. The AC/ ACT175 is useful for general logic applications where a common Master Reset and Clock are acceptable. Truth Table H HIGH Voltage Level L LOW Voltage Level t n Bit Time before Clock Pulse t n+1 Bit Time after Clock Pulse Logic Diagram Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. Figure 1. Inputs @ t n , MR H Outputs @ t n+1 D n Q n Q n LL H HH L
74AC175, 74ACT175 Quad D-Type Flip-Flop ©1988 Fairchild Semiconductor Corporation www.fairchildsemi.com 74AC175, 74ACT175 Rev. 1.4 3 Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter Rating V CC Supply Voltage –0.5V to +7.0V I IK DC Input Diode Current V I –0.5V V I V CC + 0.5V –20mA +20mA V I DC Input Voltage –0.5V to V CC + 0.5V I OK DC Output Diode Current V O –0.5V V O V CC + 0.5V –20mA +20mA V O DC Output Voltage –0.5V to V CC + 0.5V I O DC Output Source or Sink Current ±50mA I CC or I GND DC V CC or Ground Current per Output Pin ±50mA T STG Storage Temperature –65°C to +150°C T J Junction Temperature 140°C Symbol Parameter Rating V CC Supply Voltage AC ACT 2.0V to 6.0V 4.5V to 5.5V V I Input Voltage 0V to V CC V O Output Voltage 0V to V CC T A Operating Temperature –40°C to +85°C V t Minimum Input Edge Rate, AC Devices: V IN from 30% to 70% of V CC V CC @ 3.3V, 4.5V, 5.5V 125mV/ns V t Minimum Input Edge Rate, ACT Devices: V IN from 0.8V to 2.0V, V CC @ 4.5V, 5.5V 125mV/ns
74AC175, 74ACT175 Quad D-Type Flip-Flop ©1988 Fairchild Semiconductor Corporation www.fairchildsemi.com 74AC175, 74ACT175 Rev. 1.4 4 Notes: 1. All outputs loaded; thresholds on input associated with output under test. 2. Maximum test duration 2.0ms, one output loaded at a time. 3. I IN and I CC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V V CC Symbol Parameter V CC (V) Conditions T A +25°C T A –40°C to +85°C UnitsTyp. Guaranteed Limits V IH Minimum HIGH Level Input Voltage 3.0 V OUT 0.1V or V CC – 0.1V 1.5 2.1 2.1 V 4.5 2.25 3.15 3.15 5.5 2.75 3.85 3.85 V IL Maximum LOW Level Input Voltage 3.0 V OUT 0.1V or V CC – 0.1V 1.5 0.9 0.9 V 4.5 2.25 1.35 1.35 5.5 2.75 1.65 1.65 V OH Minimum HIGH Level Output Voltage 3.0 I OUT –50µA 2.99 2.9 2.9 V 4.5 4.49 4.4 4.4 5.5 5.49 5.4 5.4 V IN V IL or V IH 3.0 I OH –12mA 2.56 2.46 4.5 I OH –24mA 3.86 3.76 5.5 I OH –24mA (1) 4.86 4.76 V OL Maximum LOW Level Output Voltage 3.0 I OUT 50µA 0.002 0.1 0.1 V 4.5 0.001 0.1 0.1 5.5 0.001 0.1 0.1 V IN V IL or V IH 3.0 I OL 12mA 0.36 0.44 4.5 I OL = 24mA 0.36 0.44 5.5 I OL = 24mA(1) 0.36 0.44 IIN (3) Maximum Input Leakage Current 5.5 V I = VCC, GND ±0.1 ±1.0 µA IOLD Minimum Dynamic Output Current(2) 5.5 V OLD = 1.65V Max. 75 mA IOHD 5.5 V OHD = 3.85V Min. –75 mA ICC (3) Maximum Quiescent Supply Current 5.5 V IN = VCC or GND 4.0 40.0 µA
74AC175, 74ACT175 Quad D-Type Flip-Flop ©1988 Fairchild Semiconductor Corporation www.fairchildsemi.com 74AC175, 74ACT175 Rev. 1.4 5 Notes: 4. All outputs loaded; thresholds on input associated with output under test. 5. Maximum test duration 2.0ms, one output loaded at a time. Symbol Parameter VCC (V) Conditions TA = +25°C T A = –40°C to +85°C UnitsTyp. Guaranteed Limits VIH Minimum HIGH Level Input Voltage 4.5 V OUT = 0.1V or VCC – 0.1V 1.5 2.0 2.0 V 5.5 1.5 2.0 2.0 VIL Maximum LOW Level Input Voltage 4.5 V OUT = 0.1V or VCC – 0.1V 1.5 0.8 0.8 V 5.5 1.5 0.8 0.8 VOH Minimum HIGH Level Output Voltage 4.5 I OUT = –50µA 4.49 4.4 4.4 V 5.5 5.49 5.4 5.4 VIN = VIL or VIH: 4.5 I OH = –24mA 3.86 3.76 5.5 I OH = –24mA(4) 4.86 4.76 VOL Maximum LOW Level Output Voltage 4.5 I OUT = 50µA 0.001 0.1 0.1 V 5.5 0.001 0.1 0.1 VIN = VIL or VIH: 4.5 I OL= 24mA 0.36 0.44 5.5 I OL= 24mA(4) 0.36 0.44 IIN Maximum Input Leakage Current 5.5 V I = VCC, GND ±0.1 ±1.0 µA ICCT Maximum ICC/Input 5.5 V I = VCC – 2.1V 0.6 1.5 mA IOLD Minimum Dynamic Output Current(5) 5.5 V OLD = 1.65V Max. 75 mA IOHD 5.5 V OHD = 3.85V Min. –75 mA ICC Maximum Quiescent Supply Current 5.5 V IN = VCC or GND 4.0 40.0 µA
74AC175, 74ACT175 Quad D-Type Flip-Flop ©1988 Fairchild Semiconductor Corporation www.fairchildsemi.com 74AC175, 74ACT175 Rev. 1.4 6 Note: AC Operating Requirements for AC Note: Symbol Parameter V CC (V)(6) TA = +25°C, CL = 50pF TA = –40°C to +85°C, CL = 50pF fMAX Maximum Clock Frequency 3.3 149 214 139 MHz 5.0 187 244 187 tPLH Propagation Delay, CP to Qn or Qn tPHL Propagation Delay, CP to Qn or Qn tPLH Propagation Delay, MR to Qn tPHL Propagation Delay, MR to Qn Symbol Parameter V CC (V)(7) TA = +25°C, CL = 50pF TA = –40°C to +85°C, CL = 50pF Units Typ. Guaranteed Minimum tS Setup Time, HIGH or LOW, Dn to CP 3.3 2.0 4.5 4.5 ns 5.0 1.0 3.0 3.0 tH Hold Time, HIGH or LOW, Dn to CP 3.3 1.0 1.0 1.0 ns 5.0 1.0 1.0 1.0 tW CP Pulse Width, HIGH or LOW 3.3 2.5 4.5 4.5 ns 5.0 2.0 3.5 3.5 tW MR Pulse Width, LOW 3.3 2.5 4.5 5.0 ns 5.0 2.0 3.5 3.5 tREC Recovery Time, MR to CP 3.3 –2.0 0 0 ns 5.0 –1.0 0 0
74AC175, 74ACT175 Quad D-Type Flip-Flop ©1988 Fairchild Semiconductor Corporation www.fairchildsemi.com 74AC175, 74ACT175 Rev. 1.4 7 Note: AC Operating Requirements for ACT Note: Capacitance Symbol Parameter V CC (V)(8) TA = +25°C, CL = 50pF TA = –40°C to +85°C, CL = 50pF fMAX Maximum Clock Frequency 5.0 175 236 145 MHz tPLH Propagation Delay, CP to Qn or Qn tPHL Propagation Delay, CP to Qn or Qn tPLH Propagation Delay, MR to Qn tPHL Propagation Delay, MR to Qn Symbol Parameter V CC (V)(9) TA = +25°C, TA = –40°C to +85°C, CL = 50pF Units CL = 50pF Typ. Guaranteed Minimum tS (H) Setup Time, D n to CP 5.0 3.0 2.0 2.0 ns tS (L) 3.0 2.5 2.5 tH Hold Time, HIGH or LOW, Dn to CP 5.0 0 1.0 1.0 ns tW CP Pulse Width,HIGH or LOW 5.0 4.0 3.0 3.5 ns tW MR Pulse Width, LOW 5.0 4.0 3.0 4.0 ns trec Recovery Time, MR to CP 5.0 0 0 0 ns Symbol Parameter Conditions Typ. Units CIN Input Capacitance V CC = OPEN 4.5 pF CPD Power Dissipation Capacitance V CC = 5.0V 45.0 pF
Dimensions are in millimeters unless otherwise noted. Figure 2. 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow
Dimensions are in millimeters unless otherwise noted. Figure 3. 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Dimensions are in millimeters unless otherwise noted. Figure 4. 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Dimensions are in inches (millimeters) unless otherwise noted. Figure 5. 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide
74AC175, 74ACT175 Quad D-Type Flip-Flop ©1988 Fairchild Semiconductor Corporation www.fairchildsemi.com 74AC175, 74ACT175 Rev. 1.4 12 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx Across the board. Around the world.¥ ActiveArray¥ Bottomless¥ Build it Now¥ CoolFET¥ CROSSVOLT¥ CTL™ Current Transfer Logic™ DOME¥ E CMOS¥ EcoSPARK EnSigna¥ FACT Quiet Series™ FACT FAST FASTr¥ FPS¥ FRFET GlobalOptoisolator¥ GTO¥ HiSeC¥ i-Lo¥ ImpliedDisconnect¥ IntelliMAX¥ ISOPLANAR¥ MICROCOUPLER¥ MicroPak¥ MICROWIRE¥ MSX¥ MSXPro¥ OCX¥ OCXPro¥ OPTOLOGIC OPTOPLANAR PACMAN¥ POP¥ Power220 Power247 PowerEdge¥ PowerSaver¥ PowerTrench Programmable Active Droop¥ QFET QS¥ QT Optoelectronics¥ Quiet Series¥ RapidConfigure¥ RapidConnect¥ ScalarPump¥ SMART START¥ SPM STEALTH™ SuperFET¥ SuperSOT¥-3 SuperSOT¥-6 SuperSOT¥-8 SyncFET™ TCM¥ The Power Franchise TinyBoost¥ TinyBuck¥ TinyLogic TINYOPTO¥ TinyPower¥ TinyWire¥ TruTranslation¥ PSerDes¥ UHC UniFET¥ VCX¥ Wire¥ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I24