CD74AC175 TI
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 7
Technical content
Features
- Buffered Inputs
- Typical Propagation Delay - 6.4ns at VCC = 5V, TA = 25oC, CL = 50pF
- Exceeds 2kV ESD Protection MIL-STD-883, Method 3015
- SCR-Latchup-Resistant CMOS Process and Circuit Design
- Speed of Bipolar FAST™/AS/S with Significantly Reduced Power Consumption
- Balanced Propagation Delays
- AC Types Feature 1.5V to 5.5V Operation and Balanced Noise Immunity at 30% of the Supply
- ±24mA Output Drive Current - Fanout to 15 FAST™ ICs - Drives 50Ω Transmission Lines
Description
The CD74AC175 and CD74ACT175 are quad D flip-flops with reset that utilize the Harris Advanced CMOS Logic tech- nology. Information at the D input is transferred to the Q and Q outputs on the positive-going edge of the clock pulse. All four flip-flops are controlled by a common clock (CP) and a common reset ( MR). Resetting is accomplished by a LOW logic level independent of the clock. Pinout CD74AC175, CD74ACT175 (PDIP, SOIC) TOP VIEW
Ordering Information
TEMP. RANGE ( oC) PACKAGE PKG. NO. CD74AC175E -55 to 125 16 Ld PDIP E16.3 CD74ACT175E -55 to 125 16 Ld PDIP E16.3 CD74AC175M -55 to 125 16 Ld SOIC M16.15 CD74ACT175M -55 to 125 16 Ld SOIC M16.15 NOTES: 13. When ordering, use the entire part number. Add the suffix 96 to obtain the variant in the tape and reel. 14. Wafer and die for this part number is available which meets all elec- trical specifications. Please contact your local sales office or Harris customer service for ordering information. MR GND VCC CP September 1998 CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures. FAST™ is a Trademark of Fairchild Semiconductor. Copyright © Harris Corporation 1998 CD74AC175, CD74ACT175 Quad D Flip-Flop with Reset File Number 1964.1 [ /Title (CD74 AC175 CD74 ACT17 /Sub- ject (Quad D Flip- Flop with Reset) /Autho r () /Key- words (Har- ris Semi- con- ductor, Advan ced CMOS , Harris Semi- con- ductor, Advan ced TTL) /Cre- ator () /DOCI NFO
TRUTH TABLE (EACH FLIP-FLOP) INPUTS OUTPUTS RESET (MR) CLOCK CP DATA Dn Qn Qn LXXLH H ↑ HHL H ↑ LLH HLX Q 0 Q0 H = High Level (Steady State) L = Low Level (Steady State) X = Irrelevant ↑ = Transition from Low to High level Q0, Q0 = Level before the Indicated Steady-State Input conditions were established. CP D R Q09 CP Q Q Q0MR CP D R D1 Q Q CP D R D2 Q Q CP D R D3 Q Q GND = 8 VCC = 16 CD74AC175, CD74ACT175
Absolute Maximum Ratings Thermal Information DC Input Diode Current, IIK DC Output Diode Current, IOK DC Output Source or Sink Current per Output Pin, IO Operating Conditions Supply Voltage Range, VCC (Note 4) DC Input or Output Voltage, V Input Rise and Fall Slew Rate, dt/dv Thermal Resistance (Typical, Note 5) θ JA (oC/W) (SOIC - Lead Tips Only) CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTES: 15. For up to 4 outputs per device, add±25mA for each additional output. 16. Unless otherwise specified, all voltages are referenced to ground. 17. θ JA is measured with the component mounted on an evaluation PC board in free air. PARAMETER SYMBOL TEST CONDITIONS VCC (V) 25oC -40oC TO 85oC -55oC TO 125oC UNITSVI(V) I O (mA) MIN MAX MIN MAX MIN MAX AC TYPES High Level Input Voltage V Low Level Input Voltage V IL - - 1.5 - 0.3 - 0.3 - 0.3 V -75 (Note 6, 7) -50 (Note 6, 7) CD74AC175, CD74ACT175
12 3 - 0.36 - 0.44 - 0.5 V 24 4.5 - 0.36 - 0.44 - 0.5 V (Note 6, 7) (Note 6, 7) 5 . 5 ----- 1.65 V Input Leakage Current I I VCC or GND Quiescent Supply Current MSI ICC VCC or GND 0 5.5 - 8 - 80 - 160 µA ACT TYPES High Level Input Voltage V IH - - 4.5 to 5.5 2-2-2-V Low Level Input Voltage V IL - - 4.5 to 5.5 -75 (Note 6, 7) -50 (Note 6, 7) 24 4.5 - 0.36 - 0.44 - 0.5 V (Note 6, 7) (Note 6, 7) 5 . 5 ----- 1.65 V Input Leakage Current I I VCC or GND Quiescent Supply Current MSI ICC VCC or GND 0 5.5 - 8 - 80 - 160 µA Additional Supply Current per Input Pin TTL Inputs High
1 Unit Load
ΔI CC VCC -2.1 - 4.5 to 5.5 - 2.4 - 2.8 - 3 mA NOTES: 18. Test one output at a time for a 1-second maximum duration. Measurement is made by forcing current and measuring voltage to minimize power dissipation. 19. Test verifies a minimum 50Ω transmission-line-drive capability at 85oC, 75Ω at 125oC. ACT Input Load Table INPUT UNIT LOAD Dn 0.58 MR 0.67 CP 0.92 NOTE: Unit load isΔICC limit specified in DC Electrical Specifications Table, e.g., 2.4mA max at 25oC. PARAMETER SYMBOL TEST CONDITIONS VCC (V) 25oC -40oC TO 85oC -55oC TO 125oC UNITSVI(V) I O (mA) MIN MAX MIN MAX MIN MAX CD74AC175, CD74ACT175
Prerequisite For Switching Function PARAMETER SYMBOL V CC (V) -40oC TO 85oC -55 oC TO 125oC UNITSMIN MAX MIN MAX AC TYPES Data to CP Set-Up Time t SU 1.5 2 - 2 - ns 3.3 (Note 8) 2-2- n s (Note 9) 2-2- n s Hold Time t H 1.5 2 - 2 - ns 3.3 2 - 2 - ns 52 - 2 - n s Removal Time,MR to CP t REM 1.5 1 - 1 - ns 3.3 1 - 1 - ns 51 - 1 - n s MR Pulse Width t W 1.5 44 - 50 - ns 3.3 4.9 - 5.6 - ns 5 3.5 - 4 - ns CP Pulse Width t W 1.5 55 - 63 - ns 3.3 6.1 - 7 - ns 5 4.4 - 5 - ns CP Frequency f MAX 1.5 9 - 8 - MHz 3.3 81 - 71 - MHz 5 114 - 100 - MHz ACT TYPES Data to CP Set-Up Time t SU 5 (Note 9) 2-2- n s Hold Time t H 52 - 2 - n s Removal Time,MR to CP t REM 51 - 1 - n s MR Pulse Width t W 5 3.5 - 4 - ns Clock Pulse Width t W 5 4.4 - 5 - ns CP Frequency f MAX 5 114 - 114 - MHz NOTES: 20. 3.3V Min is at 3V. 21. 5V Min is at 4.5V. Switching SpecificationsInput tr, tf = 3ns, CL = 50pF (Worst Case) PARAMETER SYMBOL V CC (V) -40oC TO 85oC -55 oC TO 125oC UNITSMIN TYP MAX MIN TYP MAX AC TYPES Propagation Delay, CP to Q, Qt PLH , tPHL 1.5 - - 139 - - 153 ns 3.3 (Note 11) 4.4 - 15.5 4.3 - 17.1 ns (Note 12) 3.2 - 11.1 3.1 - 12.2 ns CD74AC175, CD74ACT175
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright 1999, Texas Instruments Incorporated