74AC11286_11 TI1
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 9
Technical content
9-BIT PARITY GENERATOR/CHECKER WITH BUS DRIVER PARITY I/O PORTS SCAS068A – AUGUST 1988 – REVISED APRIL 1993 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 Copyright 1993, Texas Instruments Incorporated 2–1
- Generates Either Odd or Even Parity for Nine Data Lines
- Cascadable for n-Bits Parity
- Direct Bus Connection for Parity Generation or for Checking by Using the Parity I/O Port
- Flow-Through Architecture Optimizes PCB Layout
- Center-Pin VCC and GND Configurations Minimize High-Speed Switching Noise
- EPIC /C0116 (Enhanced-Performance Implanted CMOS) 1-/C0109m Process
- 500-mA Typical Latch-Up Immunity at 125°C
- Package Options Include Plastic Small-Outline Packages and Standard Plastic 300-mil DIPs
description
The 74AC11286 universal 9-bit parity generator/checker features a local output for parity checking and a bus-driving parity I/O port for parity generation/checking. The word-length capability is easily expanded by cascading. The XMIT control input is implemented specifically to accommodate cascading. When the XMIT is low, the parity tree is disabled and the PARITY ERROR output will remain at a high logic level regardless of the input levels. When XMIT is high, the parity tree is enabled. The PARITY ERROR output will indicate a parity error when either an even number of inputs (A through I) are high and PARITY I/O is forced to a low logic level, or when an odd number of inputs are high and PARITY I/O is forced to a high logic level. The I/O control circuitry was designed so that the I/O port will remain in the high-impedance state during power up or power down to prevent bus glitches. The 74AC11286 is characterized for operation from – 40°C to 85°C. FUNCTION TABLE NUMBER OF INPUTS (A THRU I) THAT ARE HIGH XMIT INPUT PARITY I/O PARITY ERROR OUTPUT 0, 2, 4, 6, 8 l H H 1, 3, 5, 7, 9 l L H 02468 h h H 0, 2, 4, 6, 8 h l L 13579 h h L 1, 3, 5, 7, 9 h l H h — high input level l — low input level H — high output level L — low output level B A PARITY I/O GND PARITY ERROR XMIT I C D E V CC F G H D OR N PACKAGE (TOP VIEW) PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. EPIC is a trademark of Texas Instruments Incorporated.
9-BIT PARITY GENERATOR/CHECKER WITH BUS DRIVER PARITY I/O PORTS SCAS068A – AUGUST 1988 – REVISED APRIL 1993 POST OFFICE BOX 655303 • DALLAS, TEXAS 752652–2 logic symbol† 2, 1 EN 1XMIT I H G F E D C B A PARITY ERROR PARITY I/O † This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. logic diagram (positive logic) XMIT I/O PARITY I H G F E D C B A ERROR PARITY5 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡ ‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
9-BIT PARITY GENERATOR/CHECKER WITH BUS DRIVER PARITY I/O PORTS SCAS068A – AUGUST 1988 – REVISED APRIL 1993 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 2–3 recommended operating conditions MIN NOM MAX UNIT VCC Supply voltage 3 5.5 V VCC = 3 V 2.1 VIH High-level input voltage VCC = 4.5 V 3.15 V VCC = 5.5 V 3.85 VCC = 3 V 0.9 VIL Low-level input voltage VCC = 4.5 V 1.35 V VCC = 5.5 V 1.65 VI Input voltage 0 VCC V VO Output voltage 0 VCC V VCC = 3 V –4 IOH High-level output current VCC = 4.5 V –2 4 mA VCC = 5.5 V –24 VCC = 3 V 12 IOL Low-level output current VCC = 4.5 V 24 mA VCC = 5.5 V 24 /C0068t//C0068v Input transition rise or fall rate 0 10 ns/V TA Operating free-air temperature –4 0 85 °C electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC TA = 25°C MIN MAX UNITPARAMETER TEST CONDITIONS VCC MIN TYP MAX MIN MAX UNIT 3 V 2.9 2.9 IOH = – 50 /C0109A 4.5 V 4.4 4.4 5.5 V 5.4 5.4 VOH IOH = – 4 mA 3 V 2.58 2.48 V IOH =2 4 m A 4.5 V 3.94 3.8 IOH = –24 mA 5.5 V 4.94 4.8 IOH = – 75 mA/C0123 5.5 V 3.85 3 V 0.1 0.1 IOL = 50 /C0109A 4.5 V 0.1 0.1 5.5 V 0.1 0.1 VOL IOL = 12 mA 3 V 0.36 0.44 V IOL =2 4m A 4.5 V 0.36 0.44 IOL = 24 mA 5.5 V 0.36 0.44 IOL = 75 mA/C0123 5.5 V 1.65 IOZ VO = VCC or GND 5.5 V ± 0.5 ± 5 /C0109A II VI = VCC or GND 5.5 V ± 0.1 ± 1 /C0109A ICC VI = VCC or GND, IO = 0 5.5 V 8 80 /C0109A C i VI = VCC or GND 5 V 3.5 pF C o VO = VCC or GND 5 V 8.5 pF † Not more than one output should be tested at a time, and the duration of the test should not exceed 10 ms.
9-BIT PARITY GENERATOR/CHECKER WITH BUS DRIVER PARITY I/O PORTS SCAS068A – AUGUST 1988 – REVISED APRIL 1993 POST OFFICE BOX 655303 • DALLAS, TEXAS 752652–4 switching characteristics over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V, (unless otherwise noted) (see Figure 1) PARAMETER FROM TO TA = 25°C MIN MAX UNITPARAMETER (INPUT) (OUTPUT) MIN TYP MAX MIN MAX UNIT tPLH Any A thru I PARITY I/O 2.6 10 11.7 2.6 13.1 nstPHL Any A thru I PARITY I/O ns tPLH Any A thru I PARITY ERROR 3 8.5 13.1 3 14.7 ns tPHL Any A thru I PARITY ERROR 4 10.9 16 4 17.8 ns tPLH PARITY I/O PARITY ERROR ns tPHL PARITY I/O PARITY ERROR ns tPZH XMIT PARITY I/O 1.8 4.9 6.4 1.8 7 ns tPZL XMIT PARITY I/O ns tPHZ XMIT PARITY I/O 3.2 5.4 6.6 3.2 7 ns tPLZ XMIT PARITY I/O ns switching characteristics over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V, (unless otherwise noted) (see Figure 1) PARAMETER FROM TO TA = 25°C MIN MAX UNITPARAMETER (INPUT) (OUTPUT) MIN TYP MAX MIN MAX UNIT tPLH Any A thru I PARITY I/O 2 5.5 8 2 9 nstPHL Any A thru I PARITY I/O ns tPLH Any A thru I PARITY ERROR 2.5 5.2 8.9 2.5 10 ns tPHL Any A thru I PARITY ERROR 3.3 6.5 10.7 3.3 12 ns tPLH PARITY I/O PARITY ERROR ns tPHL PARITY I/O PARITY ERROR 2.9 5 7.2 2.9 7.9 ns tPZH XMIT PARITY I/O ns tPZL XMIT PARITY I/O 3 5.4 8.3 3 8.9 ns tPHZ XMIT PARITY I/O ns tPLZ XMIT PARITY I/O 3 4.6 6 3 6.3 ns operating characteristics, VCC = 5 V, TA = 25°C PARAMETER TEST CONDITIONS TYP UNIT C d Power dissipation capacitance Outputs enabled C L =5 0pF f = 1 MHz pFC pd Pow er dissipation capacitance Outputs disabled C L = 50 pF, f = 1 MH z pF
NOTES: A. C L includes probe and jig capacitance. B. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 W , tr = 3 ns, tf = 3 ns. C. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. D. The outputs are measured one at a time with one input transition per measurement. Figure 1. Load Circuit and Voltage Waveforms
Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) 74AC11286D OBSOLETE SOIC D 14 TBD Call TI Call TI 74AC11286DR OBSOLETE SOIC D 14 TBD Call TI Call TI 74AC11286N OBSOLETE PDIP N 14 TBD Call TI Call TI (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 30-Mar-2005 Addendum-Page 1
Texas InstrumentsIncorporatedand itssubsidiaries(TI)reservetherighttomake corrections,modifications,enhancements,improvements, and otherchanges toitsproductsand servicesatany timeand todiscontinueany productorservicewithoutnotice.Customersshould obtainthelatestrelevantinformationbeforeplacingordersand shouldverifythatsuch informationiscurrentand complete.Allproductsare soldsubjecttoTI’s termsand conditionsofsalesuppliedatthetimeoforderacknowledgment. TIwarrantsperformanceofitshardwareproductstothespecificationsapplicableatthetimeofsaleinaccordancewithTI’s standard warranty.Testingand otherqualitycontroltechniquesareused totheextentTIdeems necessarytosupportthiswarranty.Exceptwhere mandated by governmentrequirements,testingofallparametersofeach productisnotnecessarilyperformed. TIassumes no liabilityforapplicationsassistanceorcustomerproductdesign.Customersareresponsiblefortheirproductsand applicationsusingTIcomponents.To minimizetherisksassociatedwithcustomerproductsand applications,customersshouldprovide adequatedesignand operatingsafeguards. TIdoes notwarrantorrepresentthatany license,eitherexpressorimplied,isgrantedunderany TIpatentright,copyright,mask work right, orotherTIintellectualpropertyrightrelatingtoany combination,machine,orprocessinwhichTIproductsorservicesareused.Information publishedby TIregardingthird-partyproductsorservicesdoes notconstitutea licensefromTItouse such productsorservicesora warrantyorendorsementthereof.Use ofsuch informationmay requirea licensefroma thirdpartyunderthepatentsorotherintellectual propertyofthethirdparty,ora licensefromTIunderthepatentsorotherintellectualpropertyofTI. ReproductionofTIinformationinTIdatabooks ordatasheetsispermissibleonlyifreproductioniswithoutalterationand isaccompanied by allassociatedwarranties,conditions,limitations,and notices.Reproductionofthisinformationwithalterationisan unfairand deceptive businesspractice.TIisnotresponsibleorliableforsuch altereddocumentation.Informationofthirdpartiesmay be subjecttoadditional restrictions. ResaleofTIproductsorserviceswithstatementsdifferentfromorbeyond theparametersstatedby TIforthatproductorservicevoidsall expressand any impliedwarrantiesfortheassociatedTIproductorserviceand isan unfairand deceptivebusinesspractice.TIisnot responsibleorliableforany such statements. TIproductsarenotauthorizedforuse insafety-criticalapplications(suchas lifesupport)where a failureoftheTIproductwouldreasonably be expectedtocause severepersonalinjuryordeath,unlessofficersofthepartieshave executedan agreementspecificallygoverning such use.Buyersrepresentthattheyhave allnecessaryexpertiseinthesafetyand regulatoryramificationsoftheirapplications,and acknowledgeand agreethattheyaresolelyresponsibleforalllegal,regulatoryand safety-relatedrequirementsconcerningtheirproducts and any use ofTIproductsinsuch safety-criticalapplications,notwithstandingany applications-relatedinformationorsupportthatmay be providedby TI.Further,Buyersmust fullyindemnifyTIand itsrepresentativesagainstany damages arisingoutoftheuse ofTIproductsin such safety-criticalapplications. TIproductsareneitherdesignednorintendedforuse inmilitary/aerospaceapplicationsorenvironmentsunlesstheTIproductsare specificallydesignatedby TIas military-gradeor"enhanced plastic."Onlyproductsdesignatedby TIas military-grademeet military specifications.Buyersacknowledgeand agreethatany such use ofTIproductswhichTIhas notdesignatedas military-gradeissolelyat theBuyer's risk,and thattheyaresolelyresponsibleforcompliancewithalllegaland regulatoryrequirementsinconnectionwithsuch use. TIproductsareneitherdesignednorintendedforuse inautomotiveapplicationsorenvironmentsunlessthespecificTIproductsare designatedby TIas compliantwithISO/TS 16949 requirements.Buyersacknowledgeand agreethat,iftheyuse any non-designated productsinautomotiveapplications,TIwillnotbe responsibleforany failuretomeet such requirements. FollowingareURLs where you can obtaininformationon otherTexas Instrumentsproductsand applicationsolutions: Products Applications Audio www.ti.com/audio Communicationsand Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP ® Products www.dlp.com Energyand Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocksand Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space,Avionicsand Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportationand www.ti.com/automotive Automotive Microcontrollers microcontroller.ti.com Videoand Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IFand ZigBee® Solutions www.ti.com/lprf TIE2E Community Home Page e2e.ti.com MailingAddress:Texas Instruments,PostOfficeBox 655303,Dallas,Texas 75265 Copyright© 2011,Texas InstrumentsIncorporated