74ABT899 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 16
Technical content
/C0109 /C0110 /C0114 74ABT899 9-bit dual latch transceiver with 8-bit parity generator/checker (3-State) Product specification 1998 Jan 16 INTEGRATED CIRCUITS Supersedes data of 1993 Oct 04 IC23 Data Handbook
Philips Semiconductors Product specification 74ABT8999-bit dual latch transceiver with 8-bit parity generator/checker (3-State)
21998 Jan 16 853-1623 18864
FEATURES
- Symmetrical (A and B bus functions are identical)
- Selectable generate parity or ”feed-through” parity for A-to-B and B-to-A directions
- Independent transparent latches for A-to-B and B-to-A directions
- Selectable ODD/EVEN parity
- Continuously checks parity of both A bus and B bus latches as ERRA and ERRB
- Ability to simultaneously generate and check parity
- Can simultaneously read/latch A and B bus data
- Output capability: +64 mA/–32mA
- Latch-up protection exceeds 500mA per Jedec JC40.2 Std 17
- ESD protection exceeds 2000 V per MIL STD 883 Method 3015 and 200 V per Machine Model
- Power up 3-State
- Power-up reset
- Live insertion/extraction permitted
DESCRIPTION
The 74ABT899 is a 9-bit to 9-bit parity transceiver with separate transparent latches for the A bus and B bus. Either bus can generate or check parity. The parity bit can be fed-through with no change or the generated parity can be substituted with the SEL input. Parity error checking of the A and B bus latches is continuously provided with ERRA and ERRB, even with both buses in 3-State. The 74ABT899 features independent latch enables for the A and B bus latches, a select pin for ODD/EVEN parity, and separate error signal output pins for checking parity. FUNCTIONAL DESCRIPTION The 74ABT899 has three principal modes of operation which are outlined below. All modes apply to both the A-to-B and B-to-A directions. Transparent latch, Generate parity, Check A and B bus parity: Bus A (B) communicates to Bus B (A), parity is generated and passed on to the B (A) Bus as BPAR (APAR). If LEA and LEB are High and the Mode Select (SEL ) is Low, the parity generated from A0-A7 and B0-B7 can be checked and monitored by ERRA and ERRB . (Fault detection on both input and output buses.) Transparent latch, Feed-through parity, Check A and B bus parity: Bus A (B) communicates to Bus B (A) in a feed-through mode if SEL is High. Parity is still generated and checked as ERRA and ERRB and can be used as an interrupt to signal a data/parity bit error to the CPU. Latched input, Generate/Feed-through parity, Check A (and B) bus parity: Independent latch enables (LEA and LEB) allow other permutations of:
- Transparent latch / 1 bus latched / both buses latched
- Feed-through parity / generate parity
- Check in bus parity / check out bus parity / check in and out bus parity QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS Tamb = 25°C; GND = 0V TYPICAL UNIT tPLH tPHL Propagation delay An to Bn or Bn to An C L = 50pF; VCC = 5V 2.9 ns tPLH tPHL Propagation delay An to ERRA C L = 50pF; VCC = 5V 6.1 ns C IN Input capacitance VI = 0V or VCC 4 pF C I/O Output capacitance Outputs disabled; VO = 0V or VCC 7 pF ICCZ Total supply current Outputs disabled; VCC =5.5V 50 µA
ORDERING INFORMATION
PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 28-Pin Plastic PLCC –40°C to +85°C 74ABT899 A 74ABT899 A SOT261-3 28-Pin Plastic SOP –40°C to +85°C 74ABT899 D 74ABT899 D SOT136-1 28-Pin Plastic SSOP –40°C to +85°C 74ABT899 DB 74ABT899 DB SOT341-1
Philips Semiconductors Product specification 74ABT8999-bit dual latch transceiver with 8-bit parity generator/checker (3-State)
1998 Jan 16 3
4, 5, 6, 7, 8, 9, 10, Latched A bus 3-State inputs/outputs B0 - B7 19, 20, 21, 22, 23, 24, 25, 26 Latched B bus 3-State inputs/outputs APAR 12 A bus parity 3-State input BPAR 18 B bus parity 3-State input ODD/ EVEN 1 Parity select input (Low for EVEN parity) OEA , OEB 13, 27 Output enable inputs (gate A to B, B to A) SEL 16 Mode select input (Low for generate) LEA, LEB 3, 17 Latch enable inputs (transparent High) ERRA , ERRB 2, 15 Error signal outputs (active-Low) GND 14 Ground (0V) VCC 28 Positive supply voltage PLCC PIN CONFIGURATION LEA A1 A2 A3 A4 A5 A6 A7 BPAR VCC LEB
16 SEL
15 ERRB1
14 GND
12 APAR
Philips Semiconductors Product specification 74ABT8999-bit dual latch transceiver with 8-bit parity generator/checker (3-State)
1998 Jan 16 4
9–bit Output Buffer OE 9–bit Output Buffer 9–bit Transparent Latch LE Parity Generator Parity Generator mux OE 9–bit Transparent Latch LE 1713 OEB LEA APAR OEA SEL ODD/ EVEN LEB BPAR ERRA ERRB SA00292 FUNCTION TABLE INPUTS OPERATING MODE OEB OEA SEL LEA LEB H H X X X 3-State A bus and B bus (input A & B simultaneously) H L L L H B → A, transparent B latch, generate parity from B0 - B7, check B bus parity H L L H H B → A, transparent A & B latch, generate parity from B0 - B7, check A & B bus parity H L L X L B → A, B bus latched, generate parity from latched B0 - B7 data, check B bus parity H L H X H B → A, transparent B latch, parity feed-through, check B bus parity H L H H H B → A, transparent A & B latch, parity feed-through, check A & B bus parity L H L H X A → B, transparent A latch, generate parity from A0 - A7, check A bus parity L H L H H A → B, transparent A & B latch, generate parity from A0 - A7, check A & B bus parity L H L L X A → B, A bus latched, generate parity from latched A0 - A7 data, check A bus parity L H H H L A → B, transparent A latch, parity feed-through, check A bus parity L H H H H A → B, transparent A & B latch, parity feed-through, check A & B bus parity L L X X X Output to A bus and B bus (NOT ALLOWED) H = High voltage level L = Low voltage level X = Don’t care
Philips Semiconductors Product specification 74ABT8999-bit dual latch transceiver with 8-bit parity generator/checker (3-State)
1998 Jan 16 5
PARITY AND ERROR FUNCTION TABLE INPUTS OUTPUTS SEL ODD/EVEN xPAR (A or B) Σ of High Inputs xPAR (B or A) ERRt ERRr * PARITY MODES H H H Even Odd H H H L H L Odd H H L Even Odd L L L H L H Mode Feed-through/check parity H L H Even Odd H H L H L H Even H L L Even Odd L L H L H L Mode L H H Even Odd H L H L H H Odd L H L Even Odd H L L H H H Mode Generate parity L L H Even Odd L H L H H H Even L L L Even Odd L H H L H H Mode H = High voltage level L = Low voltage level t = Transmit–if the data path is from A→ B then ERRt is ERRA r = Receive–if the data path is from A→ B then ERRr is ERRB * Blocked if latch is not transparent ABSOLUTE MAXIMUM RATINGS 1, 2 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +7.0 V IIK DC input diode current VI < 0 –18 mA VI DC input voltage3 –1.2 to +7.0 V IOK DC output diode current VO < 0 –50 mA VOUT DC output voltage3 output in Off or High state –0.5 to +5.5 V IOUT DC output current output in Low state 128 mA Tstg Storage temperature range –65 to 150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 1505C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
Philips Semiconductors Product specification 74ABT8999-bit dual latch transceiver with 8-bit parity generator/checker (3-State)
1998 Jan 16 6
RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNIT Min Max VCC DC supply voltage 4.5 5.5 V VI Input voltage 0 VCC V VIH High-level input voltage 2.0 V VIL Low-level Input voltage 0.8 V IOH High-level output current –32 mA IOL Low-level output current 64 mA Δt/Δv Input transition rise or fall rate 0 5 ns/V Tamb Operating free-air temperature range –40 +85 °C DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25°C Tamb = –40°C to +85°C UNIT Min Typ Max Min Max VIK Input clamp voltage VCC = 4.5V; IIK = –18mA –0.9 –1.2 –1.2 V VCC = 4.5V; IOH = –3mA; VI = VIL or VIH 2.5 3.5 2.5 V VOH High-level output voltageVCC = 5.0V; IOH = –3mA; VI = VIL or VIH 3.0 4.0 3.0 V VCC = 4.5V; IOH = –32mA; VI = VIL or VIH 2.0 2.6 2.0 V VOL Low-level output voltage VCC = 4.5V; IOL = 64mA; VI = VIL or VIH 0.42 0.55 0.55 V VRST Power-up output low voltage3 VCC = 5.5V; IO = 1mA; VI = GND or VCC 0.13 0.55 0.55 V current Data pins VCC = 5.5V; VI = GND or 5.5V ±5 ±100 ±100 µA IOFF Power-off leakage currentVCC = 0.0V; VO or VI ≤ 4.5V ±5.0 ±100 ±100 µA IPU /IPD Power-up/down 3-State output current4 VCC = 2.1V; VO = 0.5V; VI= GND or VCC ; VOE = Don’t care ±5.0 ±50 ±50 µA IIH + IOZH 3-State output High currentVCC = 5.5V; VO = 2.7V; VI = VIL or VIH 5.0 50 50 µA IIL + IOZL 3-State output Low currentVCC = 5.5V; VO = 0.5V; VI = VIL or VIH –5.0 –50 –50 µA ICEX Output High leakage currentVCC = 5.5V; VO = 5.5V; VI = GND or VCC 5.0 50 50 µA IO Output current1 VCC = 5.5V; VO = 2.5V –50 –80 –180 –50 –180 mA ICCH VCC = 5.5V; Outputs High, VI = GND or VCC 50 250 250 µA ICCL Quiescent supply current VCC = 5.5V; Outputs Low, VI = GND or VCC 28 34 34 mA ICCZ VCC = 5.5V; Outputs 3-State; VI = GND or VCC 50 250 250 µA ΔICC Additional supply current per input pin2 VCC = 5.5V; one input at 3.4V, other inputs at VCC or GND 0.3 1.5 1.5 mA NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. For valid test results, data must not be loaded into the flip-flops (or latches) after applying the power. 4. This parameter is valid for any V CC between 0V and 2.1V, with a transition time of up to 10msec. From VCC = 2.1V to VCC = 5V ± 10%, a transition time of up to 100µsec is permitted.
Philips Semiconductors Product specification 74ABT8999-bit dual latch transceiver with 8-bit parity generator/checker (3-State)
1998 Jan 16 7
GND = 0V; tR = tF = 2.5ns; CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25oC VCC = +5.0V C L = 50pF R L = 500Ω Tamb = –40 to +85oC VCC = +5.0V ±10% C L = 50pF R L = 500Ω UNIT Min Typ Max Min Max tPLH tPHL Propagation delay An to Bn or Bn to An 1 1.0 1.0 3.2 2.7 4.5 4.1 1.0 1.0 4.9 4.6 ns tPLH tPHL Propagation delay An to BPAR or Bn to APAR 2 3.0 2.5 6.0 6.4 7.5 7.9 3.0 2.5 9.0 8.8 ns tPLH tPHL Propagation delay An to ERRA or Bn to ERRB 3 2.8 2.8 6.0 6.7 8.0 8.5 2.8 2.8 9.1 9.3 ns tPLH tPHL Propagation delay APAR to BPAR or BPAR to APAR 1 2.0 1.3 4.0 3.2 5.2 4.4 2.0 1.3 5.7 5.0 ns tPLH tPHL Propagation delay APAR to ERRA or BPAR to ERRB 6 1.5 1.5 4.2 4.0 5.4 5.4 1.5 1.5 6.0 6.1 ns tPLH tPHL Propagation delay ODD/EVEN to APAR or BPAR 5 2.6 2.5 5.5 5.3 6.8 6.7 2.6 2.5 8.1 7.8 ns tPLH tPHL Propagation delay ODD/EVEN to ERRA or ERRB 4 2.3 2.6 5.4 5.7 6.8 7.2 2.3 2.6 7.9 8.4 ns tPLH tPHL Propagation delay SEL to APAR or BPAR 8 1.3 1.4 4.1 4.1 5.2 5.3 1.3 1.4 6.0 5.9 ns tPLH tPHL Propagation delay SEL to ERRA or ERRB 8 3.7 5.1 6.8 8.3 8.3 9.7 3.7 5.1 9.8 11.0 ns tPLH tPHL Propagation delay LEA to Bn or LEB to An 9 1.0 1.0 3.2 3.1 4.4 4.5 1.0 1.0 4.9 5.0 ns tPLH tPHL Propagation delay LEA to BPAR or LEB to APAR 9 2.0 1.7 6.8 6.3 8.3 7.9 2.0 1.7 9.7 9.0 ns tPLH tPHL Propagation delay LEA to ERRA or LEB to ERRB 7 2.0 2.0 6.3 7.1 8.3 9.2 2.0 2.0 9.6 10.3 ns tPZH tPZL Output enable time OEA to An, APAR or OEB to Bn, BPAR 11, 12 1.0 1.0 3.0 3.4 4.3 4.8 1.0 1.0 5.1 5.4 ns tPHZ tPLZ Output disable time OEA to An, APAR or OEB to Bn, BPAR 11, 12 1.0 0.5 3.4 3.0 4.7 4.2 1.0 0.5 5.5 4.7 ns AC SETUP REQUIREMENTS GND = 0V; tR = tF = 2.5ns; CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25oC VCC = +5.0V C L = 50pF R L = 500Ω Tamb = –40 to +85oC VCC = +5.0V ±10% C L = 50pF R L = 500Ω UNIT Min Typ Max Min Max ts(H) ts(L) Setup time, High or Low An, APAR to LEA or Bn, BPAR to LEB 10 2.0 1.5 0.4 0.0 2.0 1.5 ns th(H) th(L) Hold time, High or Low An, APAR to LEA or Bn, BPAR to LEB 10 1.5 1.0 0.0 –0.2 1.5 1.0 ns tw (H) Pulse width, High LEA or LEB 10 3.0 1.9 3.0 ns
Philips Semiconductors Product specification 74ABT8999-bit dual latch transceiver with 8-bit parity generator/checker (3-State)
1998 Jan 16 8
VM = 1.5V, VIN = GND to 3.0V An, APAR (Bn, BPAR) VM tPLH tPHL VM VM VM Bn, BPAR (An, APAR) SEL INPUT OUTPUT SA00293 Waveform 1. Propagation Delay, An to Bn, Bn to An, APAR to BPAR, BPAR to APAR An (Bn) tPLH VM VM VM BPAR (APAR) LEA (LEB) INPUT OUTPUT ODD/EVEN SEL tPHL VMODD PARITY EVEN PARITY ODD PARITY NOTE: Only even parity mode is shown, odd parity mode would be with ODD/EVEN = 1 SA00294 Waveform 2. Propagation Delay, An to BPAR or Bn to APAR An (Bn) tPHL VM VM VM ERRA (ERRB ) LEA (LEB) INPUT OUTPUT APAR (BPAR) ODD/EVEN tPLH VMODD PARITY EVEN PARITY ODD PARITY NOTE: Only even parity mode is shown, odd parity mode would be with ODD/EVEN = 1 SA00295 Waveform 3. Propagation Delay, An to ERRA or Bn to ERRB
Philips Semiconductors Product specification 74ABT8999-bit dual latch transceiver with 8-bit parity generator/checker (3-State)
1998 Jan 16 9
(BPAR) VM tPLH tPHL VM VM VM ERRA (ERRB ) INPUT OUTPUT An (Bn) EVEN PARITY ODD/EVEN INPUT NOTE: Only even parity mode is shown, odd parity mode would cause inverted output SA00296 Waveform 4. Propagation Delay, ODD/EVEN to ERRA or ODD/EVEN to ERRB tPHL VM VM VM BPAR (APAR) INPUT OUTPUT APAR (BPAR) SEL tPLH VM EVEN PARITY ODD/EVEN INPUT NOTE: Only even parity mode is shown, odd parity mode would cause inverted output An (Bn) SA00297 Waveform 5. Propagation Delay, ODD/EVEN to APAR or ODD/EVEN to BPAR
Philips Semiconductors Product specification 74ABT8999-bit dual latch transceiver with 8-bit parity generator/checker (3-State)
1998 Jan 16 10
(BPAR) tPHL VM VM VM ERRA (ERRB ) INPUT OUTPUT tPLH VM EVEN PARITY ODD/EVEN INPUT An (Bn) NOTE: Only even parity mode is shown with even parity. Odd parity mode would cause inverted output and odd parity mode would be with ODD/EVEN = 1 SA00298 Waveform 6. Propagation Delay, APAR to ERRA or BPAR to ERRB An (Bn) INPUT APAR (BPAR) ODD/EVEN EVEN PARITY ODD PARITY EVEN PARITY LEA (LEB) tPHL VM ERRA (ERRB ) INPUT OUTPUT tPLH VM VM VM NOTE: Only odd parity mode is shown. Even parity mode would be with ODD/EVEN = o SA00299 Waveform 7. Propagation Delay, LEA to ERRA or LEB to ERRB
Philips Semiconductors Product specification 74ABT8999-bit dual latch transceiver with 8-bit parity generator/checker (3-State)
1998 Jan 16 11
(Bn) tPHL VM VM VM BPAR (APAR) INPUT OUTPUT APAR (BPAR) ODD/EVEN tPLH VM EVEN PARITY SEL INPUT NOTE: Only even parity mode is shown with even parity. Odd parity mode would cause inverted output and odd parity mode would be with ODD/EVEN = 1 SA00300 Waveform 8. Propagation Delay, SEL to BPAR or SEL to APAR VM APAR, An] (BPAR, Bn) INPUT SEL LEA (LEB) tPHL VM Bn, BPAR (An, APAR) INPUT OUTPUT tPLH VM VM SA00301 Waveform 9. Propagation Delay, LEA to BPAR or LEB to APAR, LEA to Bn or LEB to An ÉÉÉÉÉÉ ÉÉÉÉÉÉ ÉÉÉÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉ VM APAR, BPAR, An, Bn VM VM VM VM VM LEA, LEB ts(H) th(H) ts(L) th(L) tw (H) VM SA00302 The shaded areas indicate when the input is permitted to change for predictable output performance. Waveform 10. Data Setup and Hold Times, Pulse Width High
Philips Semiconductors Product specification 74ABT8999-bit dual latch transceiver with 8-bit parity generator/checker (3-State)
1998 Jan 16 12
OEA , OEB VM tPZH tPHZ VOH –0.3V VM VM An, APAR, Bn, BPAR SA00303 Waveform 11. 3-State Output Enable Time to High Level and Output Disable Time from High Level OEA , OEB tPZL tPLZ VOL +0.3V An, APAR, Bn, BPAR VM VM VM SA00304 Waveform 12. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level TEST CIRCUIT AND WAVEFORM C L = 50 pF 500 Ω Load Circuit DEFINITIONS C L = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. TEST S1 tpd open tPLZ /tPZL 7 V tPHZ /tPZH open SA00012 500 ΩFrom Output Under Test 7 V Open GND
Philips Semiconductors Product specification 74ABT8999-bit dual latch transceiver with 8-bit parity generator/checker (3-State)
1998 Jan 16 13
PLCC28: plastic leaded chip carrer; 28 leads; pedestal SOT261-3
Philips Semiconductors Product specification 74ABT8999-bit dual latch transceiver with 8-bit parity generator/checker (3-State)
1998 Jan 16 14
SO28: plastic small outline package; 28 leads; body width 7.5mm SOT136-1
Philips Semiconductors Product specification 74ABT8999-bit dual latch transceiver with 8-bit parity generator/checker (3-State)
1998 Jan 16 15
SSOP28: plastic shrink small outline package; 28 leads; body width 5.3mm SOT341-1
Philips Semiconductors Product specification 74ABT8999-bit dual latch transceiver with 8-bit parity generator/checker (3-State) yyyy mmm dd 16 Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 05-96 Document order number: 9397-750-03478 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.