74ABT574A PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 11
Technical content
/C0109 /C0110 /C0114 74ABT574A Octal D-type flip-flop (3-State) Product specification 1995 May 22 INTEGRATED CIRCUITS IC23 Data Handbook
Philips Semiconductors Product specification 74ABT574AOctal D-type flip-flop (3-State)
21995 May 22 853-1509 15261
FEATURES
- 74ABT574A is flow-through pinout version of 74ABT374
- Inputs and outputs on opposite side of package allow easy interface to microprocessors
- 3-State outputs for bus interfacing
- Power-up 3-State
- Power-up reset
- Common output enable
- Latch-up protection exceeds 500mA per Jedec Std 17
- ESD protection exceeds 2000 V per MIL STD 883 Method 3015 and 200 V per Machine Model
- Live insertion/extraction permitted.
DESCRIPTION
The 74ABT574A high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The 74ABT574A is an 8-bit, edge triggered register coupled to eight 3-State output buffers. The two sections of the device are controlled independently by the clock (CP) and Output Enable (OE) control gates. The state of each D input (one set-up time before the Low-to-High clock transition) is transferred to the corresponding flip-flop’s Q output. When OE is Low, the stored data appears at the outputs. When OE is High, the outputs are in the High-impedance “off” state, which means they will neither drive nor load the bus. The 3-State output buffers are designed to drive heavily loaded 3-State buses, MOS memories, or MOS microprocessors. The active-Low Output Enable (OE ) controls all eight 3-State buffers independent of the clock operation. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS Tamb = 25°C; GND = 0V TYPICAL UNIT tPLH tPHL Propagation delay CP to Qn C L = 50pF; VCC = 5V 3.0 3.4 ns C IN Input capacitance VI = 0V or VCC 3 pF C OUT Output capacitance Outputs disabled; VO = 0V or VCC 6 pF ICCZ Total supply current Outputs disabled; VCC =5.5V 100 µA
ORDERING INFORMATION
PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 20-Pin Plastic DIP –40°C to +85°C 74ABT574A N 74ABT574A N SOT146-1 20-Pin plastic SO –40°C to +85°C 74ABT574A D 74ABT574A D SOT163-1 20-Pin Plastic SSOP Type II –40°C to +85°C 74ABT574A DB 74ABT574A DB SOT339-1 20-Pin Plastic TSSOP Type I –40°C to +85°C 74ABT574A PW 7ABT574APW DH SOT360-1 PIN CONFIGURATION 10 11 1OE GND VCC CP SA00103 PIN DESCRIPTION PIN NUMBER SYMBOL FUNCTION
1 OE Output enable input (active-Low)
2, 3, 4, 5, 6, 7, 8, 9 D0-D7 Data inputs 19, 18, 17, 16, 15, 14, 13, 12 Q0-Q7 Data outputs
11 CP Clock pulse input (active rising edge)
10 GND Ground (0V)
20 VCC Positive supply voltage
Philips Semiconductors Product specification 74ABT574AOctal D-type flip-flop (3-State)
1995 May 22 3
LOGIC SYMBOL (IEEE/IEC) 2 19 3 18 4 17 5 16 EN 6 15 7 14 8 13 9 12 2D 1 SA00105 FUNCTION TABLE INPUTS INTERNAL OUTPUTS OPERATING OE CP Dn INTERNAL REGISTER Q0 – Q7 OPERATING MODE L L l h L H L H Load and read register L ↑ X NC NC Hold H H X Dn NC Dn Z Z Disable outputs H = High voltage level h = High voltage level one set-up time prior to the Low–to–High clock transition L = Low voltage level l = Low voltage level one set-up time prior to the Low–to–High clock transition NC= No change X = Don’t care Z = High impedance “off” state ↑ = Low-to-High clock transition ↑ = not a Low-to-High clock transition LOGIC DIAGRAM CP Q D CP Q D CP Q D CP Q D CP Q D CP Q D CP Q D CP Q D Q1 Q2 Q3 Q4 Q5 Q6 Q7 CP OE SA00106 2 3 45 67 8 9 19 18 17 16 15 14 13 12
Philips Semiconductors Product specification 74ABT574AOctal D-type flip-flop (3-State)
1995 May 22 4
ABSOLUTE MAXIMUM RATINGS 1, 2 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +7.0 V IIK DC input diode current VI < 0 –18 mA VI DC input voltage3 –1.2 to +7.0 V IOK DC output diode current VO < 0 –50 mA VOUT DC output voltage3 output in Off or High state –0.5 to +5.5 V IOUT DC output current output in Low state 128 mA Tstg Storage temperature range –65 to 150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNITSYMBOL PARAMETER Min Max UNIT VCC DC supply voltage 4.5 5.5 V VI Input voltage 0 VCC V VIH High-level input voltage 2.0 V VIL Low-level input voltage 0.8 V IOH High-level output current –32 mA IOL Low-level output current 64 mA Δt/Δv Input transition rise or fall rate 0 5 ns/V Tamb Operating free-air temperature range –40 +85 °C
Philips Semiconductors Product specification 74ABT574AOctal D-type flip-flop (3-State)
1995 May 22 5
DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25°C Tamb = –40°C to +85°C UNIT Min Typ Max Min Max VIK Input clamp voltage VCC = 4.5V; IIK = –18mA –0.9 –1.2 –1.2 V VCC = 4.5V; IOH = –3mA; VI = VIL or VIH 2.5 2.9 2.5 V VOH High-level output voltageVCC = 5.0V; IOH = –3mA; VI = VIL or VIH 3.0 3.4 3.0 V VCC = 4.5V; IOH = –32mA; VI = VIL or VIH 2.0 2.4 2.0 V VOL Low-level output voltage VCC = 4.5V; IOL = 64mA; VI = VIL or VIH 0.42 0.55 0.55 V VRST Power-up output low voltage3 VCC = 5.5V; IO = 1mA; VI = GND or VCC 0.13 0.55 0.55 V IOFF Power-off leakage currentVCC = 0.0V; VO or VI ≤ 4.5V ±5.0 ±100 ±100 µA IPU /IPD Power-up/down 3-State output current4 VCC = 2.0V; VO = 0.5V; VI = GND or VCC; VOE = Don’t care ±5.0 ±50 ±50 µA IOZH 3-State output High currentVCC = 5.5V; VO = 2.7V; VI = VIL or VIH 5.0 50 50 µA IOZL 3-State output Low currentVCC = 5.5V; VO = 0.5V; VI = VIL or VIH –5.0 –50 –50 µA ICEX Output High leakage currentVCC = 5.5V; VO = 5.5V; VI = GND or VCC 5.0 50 50 µA IO Output current1 VCC = 5.5V; VO = 2.5V –40 –180 –40 –180 mA ICCH VCC = 5.5V; Outputs High, VI = GND or VCC 100 250 250 µA ICCL Quiescent supply current VCC = 5.5V; Outputs Low, VI = GND or VCC 24 30 30 mA ICCZ VCC = 5.5V; Outputs 3-State; VI = GND or VCC 100 250 250 µA ΔICC Additional supply current per input pin2 VCC = 5.5V; one input at 3.4V, other inputs at VCC or GND 0.5 1.5 1.5 mA NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. For valid test results, data must not be loaded into the flip-flops (or latches) after applying the power. 4. This parameter is valid for any V CC between 0V and 2.1V, with a transition time of up to 10 msec. From VCC = 2.1V to VCC = 5V 10% a transition time of up to 100 µsec is permitted. AC CHARACTERISTICS GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25oC VCC = +5.0V Tamb = -40 to +85oC VCC = +5.0V ±0.5V UNIT Min Typ Min Min Max fMAX Maximum clock frequency 1 150 400 150 ns tPLH tPHL Propagation delay CP to Qn 1 1.5 2.0 3.0 3.4 4.4 4.7 1.5 2.0 5.0 5.1 ns tPZH tPZL Output enable time to High and Low level 1.0 2.5 2.9 3.8 4.1 5.2 1.0 2.5 5.0 5.7 ns tPHZ tPLZ Output disable time from High and Low level 1.8 1.4 3.1 2.6 4.3 3.8 1.8 1.4 5.0 4.0 ns
Philips Semiconductors Product specification 74ABT574AOctal D-type flip-flop (3-State)
1995 May 22 6
GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25oC VCC = +5.0V Tamb = -40 to +85oC VCC = +5.0V ±0.5V UNIT Min Typ Min ts(H) ts(L) Setup time, High or Low Dn to CP 2 1.0 1.0 0.6 0.2 1.0 1.0 ns th(H) th(L) Hold time, High or Low Dn to CP 2 1.0 1.0 –0.7 –0.4 1.0 1.0 ns tw (H) tw (L) CP pulse width High or Low 1 2.0 2.0 0.7 0.8 2.0 2.0 ns AC WAVEFORMS VM = 1.5V, VIN = GND to 3.0V VM VM VM VM VM 1/fMAX tw (H) t w (L) tPHL tPLH CP Qn SA00056 Waveform 1. Propagation Delay, Clock Input to Output, Clock Pulse Width, and Maximum Clock Frequency ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ VMDn VM VM VM VM VM CP ts(H) t h(H) t s(L) t h(L) NOTE: The shaded areas indicate when the input is permitted to change for predictable output performance. SA00107 Waveform 2. Data Setup and Hold Times OE VM tPZH tPHZ VOH –0.3VQn VM VM SA00108 VOH Waveform 3. 3-State Output Enable Time to High Level and Output Disable Time from High Level OE tPZL tPLZ VOL +0.3V Qn VM VM VM VOL SA00109 Waveform 4. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level
Philips Semiconductors Product specification 74ABT574AOctal D-type flip-flop (3-State)
1995 May 22 7
7.0V Test Circuit for 3-State Outputs VM VM tW AMP (V) NEGATIVE PULSE 10% 10% 90% 90% VM VM tW AMP (V) POSITIVE PULSE 90% 90% 10% 10% tTHL (tF) tTLH (tR )t THL (tF) tTLH (tR ) VM = 1.5V Input Pulse Definition DEFINITIONS R L = Load resistor; see AC CHARACTERISTICS for value. C L = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. R T = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS FAMILY Amplitude Rep. Rate t W tR tF 74ABT 3.0V 1MHz 500ns 2.5ns 2.5ns SWITCH POSITION TEST SWITCH tPLZ closed tPZL closed All other open SA00012 D.U.T.
Philips Semiconductors Product specification 74ABT574AOctal D-type flip-flop (3-State)
1995 May 22 8
DIP20: plastic dual in-line package; 20 leads (300 mil) SOT146-1 SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1
Philips Semiconductors Product specification 74ABT574AOctal D-type flip-flop (3-State)
1995 May 22 9
SSOP20: plastic shrink small outline package; 20 leads; body width 5.3 mm SOT339-1
Philips Semiconductors Product specification 74ABT574AOctal D-type flip-flop (3-State)
1995 May 22 10
TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1
Philips Semiconductors Product specification 74ABT574AOctal D-type flip-flop (3-State) Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 DEFINITIONS Data Sheet Identification Product Status Definition Objective Specification Preliminary Specification Product Specification Formative or in Design Preproduction Product Full Production This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product. Philips Semiconductors and Philips Electronics North America Corporation register eligible circuits under the Semiconductor Chip Protection Act. Copyright Philips Electronics North America Corporation 1995 All rights reserved. Printed in U.S.A.