74ABT573A PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 6
Technical content
Philips Semiconductors Product specification 74ABT573AOctal D-type transparent latch (3-State)
11995 Sep 06 853–1455 15703
FEATURES
- 74ABT573A is flow-through pinout version of 74ABT373
- Inputs and outputs on opposite side of package allow easy interface to microprocessors
- 3-State output buffers
- Common output enable
- Latch-up protection exceeds 500mA per JEDEC Std 17
- ESD protection exceeds 2000 V per MIL STD 883 Method 3015 and 200 V per Machine Model
- Power-up 3-State
- Power-up reset
DESCRIPTION
The 74ABT573A high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The 74ABT573A device is an octal transparent latch coupled to eight 3-State output buffers. The two sections of the device are controlled independently by Enable (E) and Output Enable (OE) control gates. The 74ABT573A is functionally identical to the 74ABT373 but has a flow-through pinout configuration to facilitate PC board layout and allow easy interface with microprocessors. The data on the D inputs are transferred to the latch outputs when the Latch Enable (E) input is High. The latch remains transparent to the data inputs while E is High, and stores the data that is present one setup time before the High-to-Low enable transition. The 3-State output buffers are designed to drive heavily loaded 3-State buses, MOS memories, or MOS microprocessors. The active-Low Output Enable (OE ) controls all eight 3-State buffers independent of the latch operation. When OE is Low, the latched or transparent data appears at the outputs. When OE is High, the outputs are in the High-impedance ”OFF” state, which means they will neither drive nor load the bus. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS Tamb = 25°C; GND = 0V TYPICAL UNIT tPLH tPHL Propagation delay Dn to Qn C L = 50pF; VCC = 5V 2.8 3.3 ns C IN Input capacitance VI = 0V or VCC 3 pF C OUT Output capacitance Outputs disabled; VO = 0V or VCC 6 pF ICCZ Total supply current Outputs disabled; VCC =5.5V 100 µA
ORDERING INFORMATION
PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 20-Pin Plastic DIP –40°C to +85°C 74ABT573A N 74ABT573A N SOT146-1 20-Pin plastic SO –40°C to +85°C 74ABT573A D 74ABT573A D SOT163-1 20-Pin Plastic SSOP Type II –40°C to +85°C 74ABT573A DB 74ABT573A DB SOT339-1 20-Pin Plastic TSSOP Type I –40°C to +85°C 74ABT573A PW 74ABT573APW DH SOT360-1 PIN CONFIGURATION 10 11
1 VCC
E OE GND SA00185 PIN DESCRIPTION PIN NUMBER SYMBOL FUNCTION
1 OE Output enable input (active-Low)
2, 3, 4, 5, 6, 7, 8, 9 D0-D7 Data inputs 19, 18, 17, 16, 15, 14, 13, 12 Q0-Q7 Data outputs
11 E Enable input (active-High)
10 GND Ground (0V)
20 VCC Positive supply voltage
Philips Semiconductors Product specification 74ABT573AOctal D-type transparent latch (3-State)
1995 Sep 06 2
LOGIC SYMBOL (IEEE/IEC) EN 2D 1 19 SA00187 LOGIC SYMBOL 23456789 E OE D0 D1 D2 D3 D4 D5 D6 D7 Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 19 18 17 16 15 14 13 12 SA00186 FUNCTION TABLE INPUTS INTERNAL OUTPUTS OPERATING MODE OE E Dn REGISTER Q0 – Q7 L L H H L H L H L H Enable and read register L L l h L H L H Latch and read register L L X NC NC Hold H H L H X Dn NC Dn Z Z Disable outputs H = High voltage level h = High voltage level one set-up time prior to the High-to-Low E transition L = Low voltage level l = Low voltage level one set-up time prior to the High-to-Low E transition NC= No change X = Don’t care Z = High impedance “off” state ↓ = High-to-Low E transition LOGIC DIAGRAM EQ D EQ D EQ D EQ D EQ D EQ D EQ D EQ D E OE SA00188
Philips Semiconductors Product specification 74ABT573AOctal D-type transparent latch (3-State)
1995 Sep 06 3
ABSOLUTE MAXIMUM RATINGS 1, 2 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +7.0 V IIK DC input diode current VI < 0 –18 mA VI DC input voltage3 –1.2 to +7.0 V IOK DC output diode current VO < 0 –50 mA VOUT DC output voltage3 output in Off or High state –0.5 to +5.5 V IOUT DC output current output in Low state 128 mA Tstg Storage temperature range –65 to 150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNIT Min Max VCC DC supply voltage 4.5 5.5 V VI Input voltage 0 VCC V VIH High-level input voltage 2.0 V VIL Low-level input voltage 0.8 V IOH High-level output current –32 mA IOL Low-level output current 64 mA Δt/Δv Input transition rise or fall rate 0 5 ns/V Tamb Operating free-air temperature range –40 +85 °C
Philips Semiconductors Product specification 74ABT573AOctal D-type transparent latch (3-State)
1995 Sep 06 4
DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25°C Tamb = –40°C to +85°C UNIT Min Typ Max Min Max VIK Input clamp voltage VCC = 4.5V; IIK = –18mA –0.9 –1.2 –1.2 V VCC = 4.5V; IOH = –3mA; VI = VIL or VIH 2.5 2.9 2.5 V VOH High-level output voltageVCC = 5.0V; IOH = –3mA; VI = VIL or VIH 3.0 3.4 3.0 V VCC = 4.5V; IOH = –32mA; VI = VIL or VIH 2.0 2.4 2.0 V VOL Low-level output voltage VCC = 4.5V; IOL = 64mA; VI = VIL or VIH 0.42 0.55 0.55 V VRST Power-up output low voltage3 VCC = 5.5V; IO = 1mA; VI = GND or VCC 0.13 0.55 0.55 V IOFF Power-off leakage currentVCC = 0.0V; VO or VI ≤ 4.5V ±5.0 ±100 ±100 µA IPU /IPD Power-up/down 3-State output current4 VCC = 2.0V; VO = 0.5V; VOE = Don’t Care; VI = GND or VCC ±5.0 ±50 ±50 µA IOZH 3-State output High currentVCC = 5.5V; VO = 2.7V; VI = VIL or VIH 5.0 50 50 µA IOZL 3-State output Low currentVCC = 5.5V; VO = 0.5V; VI = VIL or VIH –5.0 –50 –50 µA ICEX Output High leakage currentVCC = 5.5V; VO = 5.5V; VI = GND or VCC 5.0 50 50 µA IO Output current1 VCC = 5.5V; VO = 2.5V –40 –180 –40 –180 mA ICCH VCC = 5.5V; Outputs High, VI = GND or VCC 100 250 250 µA ICCL Quiescent supply current VCC = 5.5V; Outputs Low, VI = GND or VCC 24 30 30 mA ICCZ VCC = 5.5V; Outputs 3-State; VI = GND or VCC 100 250 250 µA ΔICC Additional supply current per input pin2 VCC = 5.5V; one input at 3.4V, other inputs at VCC or GND 0.5 1.5 1.5 mA NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. For valid test results, data must not be loaded into the flip-flops (or latches) after applying the power. 4. This parameter is valid for any V CC between 0V and 2.1V with a transition time of up to 10msec. For VCC = 2.1V to VCC = 5V 10%, a transition time of up to 100µsec is permitted. AC CHARACTERISTICS GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25oC VCC = +5.0V Tamb = -40 to +85oC VCC = +5.0V ±0.5V UNIT Min Typ Max Min Max tPLH tPHL Propagation delay Dn to Qn 2 1.5 2.2 2.8 3.3 4.0 4.8 1.5 2.2 4.5 5.3 ns tPLH tPHL Propagation delay E to Qn 1 1.2 1.8 2.5 3.0 4.0 4.4 1.2 1.8 4.5 4.7 ns tPZH tPZL Output enable time to High and Low level 1.2 2.7 3.0 3.8 4.5 5.3 1.2 2.7 5.2 5.7 ns tPHZ tPLZ Output disable time from High and Low level 1.5 1.2 2.8 2.2 4.1 3.4 1.5 1.2 4.5 3.8 ns
Philips Semiconductors Product specification 74ABT573AOctal D-type transparent latch (3-State)
1995 Sep 06 5
GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25oC VCC = +5.0V Tamb = -40 to +85oC VCC = +5.0V ±0.5V UNIT Min Typ Min ts(H) ts(L) Setup time, High or Low Dn to E 3 1.0 1.0 0.3 0.2 1.0 1.0 ns th(H) th(L) Hold time, High or Low Dn to E 3 1.0 1.0 –0.1 –0.2 1.0 1.0 ns tw (H) E pulse width High 1 2.0 0.7 2.0 ns AC WAVEFORMS VM = 1.5V, VIN = GND to 3.0V tw (H) tPHL tPLH E Qn SA00063 VM VM VM VM VM Waveform 1. Propagation Delay, Enable to Output, and Enable Pulse Width VMVM VMVM Qn Dn tPLH tPHL SA00064 Waveform 2. Propagation Delay for Data to Outputs NOTE: The shaded areas indicate when the input is permitted to change for predictable output performance. ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ VMDn VM VM VM VM E ts(H) th(H) ts(L) th(L) SA00065 VM Waveform 3. Data Setup and Hold Times OE VM tPZH tPHZ Qn VM VM SA00066 VOH –0.3V Waveform 4. 3-State Output Enable Time to High Level and Output Disable Time from High Level OE tPZL tPLZ VOL Qn VM VM VM SA00332 VOL +0.3V Waveform 5. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level
Philips Semiconductors Product specification 74ABT573AOctal D-type transparent latch (3-State)
1995 Sep 06 6
7.0V Test Circuit for 3-State Outputs VM VM tW AMP (V) NEGATIVE PULSE 10% 10% 90% 90% VM VM tW AMP (V) POSITIVE PULSE 90% 90% 10% 10% tTHL (tF) tTLH (tR )t THL (tF) tTLH (tR ) VM = 1.5V Input Pulse Definition DEFINITIONS R L = Load resistor; see AC CHARACTERISTICS for value. C L = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. R T = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS FAMILY Amplitude Rep. Rate t W tR tF 74ABT 3.0V 1MHz 500ns 2.5ns 2.5ns SWITCH POSITION TEST SWITCH tPLZ closed tPZL closed All other open SA00012 D.U.T.