74ABT540 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 10
Technical content
/C0109 /C0110 /C0114 74ABT540 Octal buffer, inverting (3-State) Product specification Supersedes data of 1996 Oct 08 1998 Jan 16 INTEGRATED CIRCUITS IC23 Data Handbook
Philips Semiconductors Product specification 74ABT540Octal buffer, inverting (3-State)
21998 Jan 16 853–1609 18864
FEATURES
- Octal bus interface
- 3-State buffers
- Live insertion/extraction permitted
- Efficient pinout to facilitate PC board layout
- Output capability: +64mA/–32mA
- Latch-up protection exceeds 500mA per Jedec JC40.2 Std 17
- ESD protection exceeds 2000 V per MIL STD 883 Method 3015 and 200 V per Machine Model
- Power-up 3-State
DESCRIPTION
The 74ABT540 high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The 74ABT540 device is an octal inverting buffer that is ideal for driving bus lines. The device features input and outputs on opposite sides of the package to facilitate printed circuit board layout. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS Tamb = 25°C; GND = 0V TYPICAL UNIT tPLH tPHL Propagation delay An to Yn C L = 50pF; VCC = 5V 3.1 ns C IN Input capacitance VI = 0V or VCC 3 pF C OUT Output capacitance Outputs disabled; VO = 0V or VCC 7 pF ICCZ Total supply current Outputs disabled; VCC = 5.5V 50 µA
ORDERING INFORMATION
PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 20-Pin Plastic DIP –40°C to +85°C 74ABT540 N 74ABT540 N SOT146-1 20-Pin plastic SO –40°C to +85°C 74ABT540 D 74ABT540 D SOT163-1 20-Pin Plastic SSOP Type II –40°C to +85°C 74ABT540 DB 74ABT540 DB SOT339-1 20-Pin Plastic TSSOP Type I –40°C to +85°C 74ABT540 PW 74ABT540PW DH SOT360-1 PIN CONFIGURATION 10 11 20OE 0 GND V CC OE 1 SA00197 LOGIC SYMBOL Y OE OE 1 SA00198
Philips Semiconductors Product specification 74ABT540Octal buffer, inverting (3-State)
1998 Jan 16 3
LOGIC SYMBOL (IEEE/IEC) EN 2 18 3 17 4 16 5 15 1 & 6 14 7 13 8 12 9 11 SA00199 PIN DESCRIPTION PIN NUMBER SYMBOL NAME AND FUNCTION 2, 3, 4, 5, 6, 7, 8, 9 A0 – A7 Data inputs 18, 17, 16, 15, 14, 13, 12, 11 Y0 – Y7 Data outputs 1, 19 OE 0, OE1 Output enables
10 GND Ground (0V)
20 VCC Positive supply voltage
L L X H L L H X L H X X H L Z Z H = High voltage level L = Low voltage level X = Don’t care Z = High impedance ”off” state ABSOLUTE MAXIMUM RATINGS 1, 2 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +7.0 V IIK DC input diode current VI < 0 –18 mA VI DC input voltage3 –1.2 to +7.0 V IOK DC output diode current VO < 0 –50 mA VOUT DC output voltage3 output in Off or High state –0.5 to +5.5 V IOUT DC output current output in Low state 128 mA Tstg Storage temperature range –65 to 150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
Philips Semiconductors Product specification 74ABT540Octal buffer, inverting (3-State)
1998 Jan 16 4
RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNIT Min Max VCC DC supply voltage 4.5 5.5 V VI Input voltage 0 VCC V VIH High-level input voltage 2.0 V VIL Low-level Input voltage 0.8 V IOH High-level output current –32 mA IOL Low-level output current 64 mA Δt/Δv Input transition rise or fall rate 0 10 ns/V Tamb Operating free-air temperature range –40 +85 °C DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25°C Tamb = –40°C to +85°C UNIT Min Typ Max Min Max VIK Input clamp voltage VCC = 4.5V; IIK = –18mA –0.9 –1.2 –1.2 V VCC = 4.5V; IOH = –3mA; VI = VIL or VIH 2.5 2.9 2.5 V VOH High-level output voltageVCC = 5.0V; IOH = –3mA; VI = VIL or VIH 3.0 3.4 3.0 V VCC = 4.5V; IOH = –32mA; VI = VIL or VIH 2.0 2.4 2.0 V VOL Low-level output voltage VCC = 4.5V; IOL = 64mA; VI = VIL or VIH 0.42 0.55 0.55 V IOFF Power-off leakage currentVCC = 0.0V; VI or VO ≤ 4.5V ±5.0 ±100 ±100 µA IPU /IPD Power-up/down 3-State output current3 VCC = 2.1V; VO = 0.5V; VI = GND or VCC ; VOE = Don’t care ±5.0 ±50 ±50 µA IOZH 3-State output High currentVCC = 5.5V; VO = 2.7V; VI = VIL or VIH 5.0 50 50 µA IOZL 3-State output Low currentVCC = 5.5V; VO = 0.5V; VI = VIL or VIH –5.0 –50 –50 µA ICEX Output High leakage currentVCC = 5.5V; VO = 5.5V; VI = GND or VCC 5.0 50 50 mA IO Output current1 VCC = 5.5V; VO = 2.5V –50 –100 –180 –50 –180 mA ICCH VCC = 5.5V; Outputs High, VI = GND or VCC 50 250 250 µA ICCL Quiescent supply current VCC = 5.5V; Outputs Low, VI = GND or VCC 24 30 30 mA ICCZ VCC = 5.5V; Outputs 3-State; VI = GND or VCC 50 250 250 µA Outputs enabled, one input at 3.4V, other inputs at VCC or GND; VCC = 5.5V 0.5 1.5 1.5 mA ΔICC Additional supply current per input pin2 Outputs 3-State, one data input at 3.4V, other inputs at V CC or GND; VCC = 5.5V 0.5 50 50 µA Outputs 3-State, one enable input at 3.4V, other inputs at VCC or GND; VCC = 5.5V 0.5 1.5 1.5 mA NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. This parameter is valid for any V CC between 0V and 2.1V, with a transition time of up to 10msec. From VCC = 2.1V to VCC = 5V ± 10% a transition time of up to 100µsec is permitted.
Philips Semiconductors Product specification 74ABT540Octal buffer, inverting (3-State)
1998 Jan 16 5
GND = 0V; tR = tF = 2.5ns; CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25°C VCC = +5.0V Tamb = –40°C to +85°C VCC = +5.0V ±0.5V UNIT Min Typ Max Min Max tPLH tPHL Propagation delay An to Yn 1 1.0 1.0 2.9 3.1 4.1 4.3 1.0 1.0 4.8 4.8 ns tPZH tPZL Output enable time to High and Low level 2 1.1 1.1 4.1 4.6 4.9 5.8 1.1 1.1 5.9 6.4 ns tPHZ tPLZ Output disable time from High and Low level 2 1.5 1.2 3.6 2.9 6.8 5.7 1.5 1.2 7.3 6.2 ns AC WAVEFORMS VM = 1.5V, VIN = GND to 3.0V An INPUT VM VMYn OUTPUT VM VM tPHL tPLH SA00200 Waveform 1. Waveforms Showing the Input (An) to Output (Yn) Propagation Delays OE n INPUT VM VM tPZH tPHZ Yn OUTPUT VOH VM VMYn OUTPUT VOL tPZL tPLZ 3.5V VOL + 0.3V VOH – 0.3V SA00201 Waveform 2. Waveforms Showing the 3-State Output Enable and Disable Times TEST CIRCUIT AND WAVEFORMS C L = 50 pF 500 Ω Load Circuit DEFINITIONS C L = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. TEST S1 tpd open tPLZ /tPZL 7 V tPHZ /tPZH open SA00012 500 ΩFrom Output Under Test 7 V Open GND
Philips Semiconductors Product specification 74ABT540Octal buffer, inverting (3-State)
1998 Jan 16 6
DIP20: plastic dual in-line package; 20 leads (300 mil) SOT146-1
Philips Semiconductors Product specification 74ABT540Octal buffer, inverting (3-State)
1998 Jan 16 7
SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1
Philips Semiconductors Product specification 74ABT540Octal buffer, inverting (3-State)
1998 Jan 16 8
SSOP20: plastic shrink small outline package; 20 leads; body width 5.3 mm SOT339-1
Philips Semiconductors Product specification 74ABT540Octal buffer, inverting (3-State)
1998 Jan 16 9
TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1
Philips Semiconductors Product specification 74ABT540Octal buffer, inverting (3-State) yyyy mmm dd 10 Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 05-96 Document order number: 9397-750-03471 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.