74ABT377A PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 12

Technical content

/C0109 /C0110 /C0114 74ABT377A Octal D-type flip-flop with enable Product specification Replaces data sheet 74ABT377 of 1995 Sep 06 IC23 Data Handbook

1997 Feb 26

Philips Semiconductors Product specification 74ABT377AOctal D-type flip-flop with enable

21997 Feb 26 853-1457 17800

FEATURES

  • Ideal for addressable register applications
  • 8-bit positive edge-triggered register
  • Enable for address and data synchronization applications
  • Output capability: +64mA/-32mA
  • Latch-up protection exceeds 500mA per Jedec JC40.2 Std 17
  • ESD protection exceeds 2000V per MIL STD 883 Method 3015 and 200V per Machine Model
  • Power-up reset

DESCRIPTION

The 74ABT377A high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The 74ABT377A has 8 edge-triggered D-type flip-flops with individual D inputs and Q outputs. The common buffered clock (CP) input loads all flip-flops simultaneously when the Enable (E) input is Low. The register is fully edge triggered. The state of each D input, one set-up time before the Low-to-High clock transition, is transferred to the corresponding flip-flop’s Q output. The E input must be stable one setup time prior to the Low-to-High clock transition for predictable operation. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS Tamb = 25°C; GND = 0V TYPICAL UNIT tPLH tPHL Propagation delay CP to Qn C L = 50pF; VCC = 5V 3.1 3.6 ns C IN Input capacitance VI = 0V or VCC 4 pF ICCH Total current supply Outputs High; VCC = 5.5V 500 nA

ORDERING INFORMATION

PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 20-Pin Plastic DIP –40°C to +85°C 74ABT377A N 74ABT377A N SOT146-1 20-Pin plastic SO –40°C to +85°C 74ABT377A D 74ABT377A D SOT163-1 20-Pin Plastic SSOP Type II –40°C to +85°C 74ABT377A DB 74ABT377A DB SOT339-1 20-Pin Plastic TSSOP Type I –40°C to +85°C 74ABT377A PW 74ABT377PWA DH SOT360-1 PIN CONFIGURATION 10 11

1 VCC

E SA00155 LOGIC SYMBOL Q0 Q1 Q2 3478 D0 D1 D2 D3 1512 Q4 Q5 Q6 1916 13 14 17 18 D4 D5 D6 D7 CP OE SA00152

Philips Semiconductors Product specification 74ABT377AOctal D-type flip-flop with enable

1997 Feb 26 3

LOGIC SYMBOL (IEEE/IEC) 3 2 4 5 7 6 8 9 IC2 13 12 14 15 17 16 18 19 SA00157 PIN DESCRIPTION PIN NUMBER SYMBOL FUNCTION

1 E Enable input (active–Low)

17, 18 D0-D7 Data inputs 16, 19 Q0-Q7 Data outputs

11 CP Clock Pulse input (active

rising edge)

10 GND Ground (0V)

20 VCC Positive supply voltage

D CP D CP DQ CP QQ 347 8 Q0 Q1 Q2 Q3 CP D0 D1 D2 D3 DQ CP D CP D CP DQ CP QQ 13 14 17 18 D4 D5 D6 D7 2 5 6 9 12 15 16 19 Q4 Q5 Q6 Q7 E SA00158

Philips Semiconductors Product specification 74ABT377AOctal D-type flip-flop with enable

1997 Feb 26 4

INPUTS OUTPUTS OPERATING MODE E CP Dn Qn l ↑ h H Load “1” l ↑ l L Load “0” h H X X X no change no change Hold (do nothing) H = High voltage level h = High voltage level one set-up time prior to the Low-to-High clock transition L = Low voltage level l = Low voltage level one set-up time prior to the Low-to-High clock transition X = Don’t care ↑ = Low-to-High clock transition ABSOLUTE MAXIMUM RATINGS 1, 2 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +7.0 V IIK DC input diode current VI < 0 –18 mA VI DC input voltage3 –1.2 to +7.0 V IOK DC output diode current VO < 0 –50 mA VOUT DC output voltage3 output in Off or High state –0.5 to +5.5 V IOUT DC output current output in Low state 128 mA Tstg Storage temperature range –65 to 150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNIT MIN MAX VCC DC supply voltage 4.5 5.5 V VI Input voltage 0 VCC V VIH High-level input voltage 2.0 V VIL Low-level input voltage 0.8 V IOH High-level output current –32 mA IOL Low-level output current 64 mA Δt/Δv Input transition rise or fall rate 0 5 ns/V Tamb Operating free-air temperature range –40 +85 °C

Philips Semiconductors Product specification 74ABT377AOctal D-type flip-flop with enable

1997 Feb 26 5

DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25°C Tamb = –40°C to +85°C UNIT MIN TYP MAX MIN MAX VIK Input clamp voltage VCC = 4.5V; IIK = –18mA –0.9 –1.2 –1.2 V VCC = 4.5V; IOH = –3mA; VI = VIL or VIH 2.5 2.9 2.5 V VOH High–level output voltage VCC = 5.0V; IOH = –3mA; VI = VIL or VIH 3.0 3.4 3.0 V VCC = 4.5V; IOH = –32mA; VI = VIL or VIH 2.0 2.4 2.0 V VOL Low-level output voltage VCC = 4.5V; IOL = 64mA; VI = VIL or VIH 0.42 0.55 0.55 V VRST Power-up output low voltage3 VCC = 5.5V; IO = 1mA; VI = GND or VCC 0.13 0.55 0.55 V IOFF Power-off leakage current VCC = 0.0V; VO or VI ≤ 4.5V ±5.0 ±100 ±100 µA ICEX Output High leakage currentVCC = 5.5V; VO = 5.5V; VI = GND or VCC 5.0 50 50 µA IO Output current1 VCC = 5.5V; VO = 2.5V –50 –100 –180 –50 –180 mA ICCH Quiescent supply current VCC = 5.5V; Outputs High, VI = GND or VCC 0.5 250 250 µA ICCL VCC = 5.5V; Outputs Low, VI = GND or VCC 24 30 30 mA ΔICC Additional supply current per input pin2 VCC = 5.5V; one input at 3.4V, other inputs at VCC or GND 0.5 1.5 1.5 mA NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. For valid test results, data must not be loaded into the flip-flops (or latches) after applying the power. AC CHARACTERISTICS GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS1 SYMBOL PARAMETER WAVEFORM Tamb = +25oC VCC = +5.0V Tamb = -40 to +85oC VCC = +5.0V +0.5V UNIT MIN TYP MAX MIN MAX fMAX Maximum clock frequency 1 150 250 150 MHz tPLH tPHL Propagation delay CP to Qn 1 1.8 2.2 3.1 3.6 4.0 4.7 1.8 2.2 4.8 4.9 ns NOTE: 1. Limits may vary among suppliers.

Philips Semiconductors Product specification 74ABT377AOctal D-type flip-flop with enable

1997 Feb 26 6

GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25oC VCC = +5.0V Tamb = -40 to +85oC VCC = +5.0V +0.5V UNIT MIN TYP MIN ts(H) ts(L) Setup time, High or Low Dn to CP 2 1.5 1.5 0.7 0.5 1.5 1.5 ns th(H) th(L) Hold time, High or Low Dn to CP 2 1.0 1.0 –0.4 –0.6 1.0 1.0 ns ts(H) ts(L) Setup time, High or Low E to CP 2 2.0 2.0 1.1 1.0 2.0 2.0 ns th(H) th(L) Hold time, High or Low E to CP 2 1.0 1.0 –0.9 –0.1 1.0 1.0 ns tw (H) tw (L) Clock Pulse width High or Low 1 1.5 2.0 0.7 1.0 1.5 2.0 ns AC WAVEFORMS VM = 1.5V, VIN = GND to 3.0V VM tPLHtPHL VM VM VMCP Q n 1/fMAX tW (H) tW (L) SA00159 Waveform 1. Propagation Delay, Clock Input to Output, Clock Pulse Width and Maximum Clock Frequency ÉÉÉÉ ÉÉÉÉ ÉÉÉÉÉÉ ÉÉÉÉÉÉ ÉÉÉÉ ÉÉÉÉ CP VM VM VM VM VM ts(L) E th(L) th(H) ts(H) ÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ D n VM ts th VM VM SA00160 NOTE: The shaded areas indicate when the input is permitted to change for predict- able output performance. Waveform 2. Data and Enable Setup and Hold Times

Philips Semiconductors Product specification 74ABT377AOctal D-type flip-flop with enable

1997 Feb 26 7

D.U.T. VOUT C L R L VCC R L 7.0V Test Circuit for 3-State Outputs VM VM tW AMP (V) NEGATIVE PULSE 10% 10% 90% 90% VM VM tW AMP (V) POSITIVE PULSE 90% 90% 10% 10% tTHL (tF) tTLH (tR )t THL (tF) tTLH (tR ) VM = 1.5V Input Pulse Definition DEFINITIONS R L = Load resistor; see AC CHARACTERISTICS for value. C L = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. R T = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS FAMILY 74ABT SA00057 SWITCH POSITION TEST SWITCH All open Amplitude Rep. Rate t W tF 3.0V 1MHz 500ns 2.5ns tR 2.5ns

Philips Semiconductors Product specification 74ABT377AOctal D-type flip-flop with enable

1997 Feb 26 8

Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Philips Semiconductors

811 East Arques Avenue

P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 DEFINITIONS Data Sheet Identification Product Status Definition Objective Specification Preliminary Specification Product Specification Formative or in Design Preproduction Product Full Production This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product.  Copyright Philips Electronics North America Corporation 1997 All rights reserved. Printed in U.S.A. /C0109 /C0110 /C0114

Philips Semiconductors Product specification 74ABT377Octal D-type flip-flop with enable

1995 Sep 06 9

DIP20: plastic dual in-line package; 20 leads (300 mil) SOT146-1

Philips Semiconductors Product specification 74ABT377Octal D-type flip-flop with enable

1995 Sep 06 10

SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1

Philips Semiconductors Product specification 74ABT377Octal D-type flip-flop with enable

1995 Sep 06 11

SSOP20: plastic shrink small outline package; 20 leads; body width 5.3 mm SOT339-1

Philips Semiconductors Product specification 74ABT377Octal D-type flip-flop with enable

1995 Sep 06 12

TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1