74ABT374A PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 6
Technical content
Philips Semiconductors Product specification 74ABT374AOctal D-type flip-flop; positive-edge trigger (3-State)
11995 Sep 06 853-1448 15704
FEATURES
- 8-bit positive edge triggered register
- 3-State output buffers
- Output capability: +64mA/–32mA
- Latch-up protection exceeds 500mA per Jedec Std 17
- ESD protection exceeds 2000 V per MIL STD 883 Method 3015 and 200 V per Machine Model
- Power-up 3-State
- Power-up reset
- Live insertion/extraction permitted
DESCRIPTION
The 74ABT374A high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The 74ABT374A is an 8-bit, edge triggered register coupled to eight 3-State output buffers. The two sections of the device are controlled independently by the clock (CP) and Output Enable (OE) control gates. The register is fully edge triggered. The state of each D input, one set-up time before the Low-to-High clock transition, is transferred to the corresponding flip-flop’s Q output. The 3-State output buffers are designed to drive heavily loaded 3-State buses, MOS memories, or MOS microprocessors. The active-Low Output Enable (OE) controls all eight 3-State buffers independent of the clock operation. When OE is Low, the stored data appears at the outputs. When OE is High, the outputs are in the High-impedance “OFF” state, which means they will neither drive nor load the bus. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS Tamb = 25°C; GND = 0V TYPICAL UNIT tPLH tPHL Propagation delay CP to Qn C L = 50pF; VCC = 5V 3.4 3.8 ns C IN Input capacitance VI = 0V or VCC 4 pF C OUT Output capacitance Outputs disabled; VO = 0V or VCC 7 pF ICCZ Total supply current Outputs disabled; VCC =5.5V 110 µA
ORDERING INFORMATION
PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 20-Pin Plastic DIP –40°C to +85°C 74ABT374A N 74ABT374A N SOT146-1 20-Pin plastic SO –40°C to +85°C 74ABT374A D 74ABT374A D SOT163-1 20-Pin Plastic SSOP Type II –40°C to +85°C 74ABT374A DB 74ABT374A DB SOT339-1 20-Pin Plastic TSSOP Type I –40°C to +85°C 74ABT374A PW 74ABT374APW DH SOT360-1 PIN CONFIGURATION 10 11 20OE Q3 Q4 GND VCC CP SA00110 PIN DESCRIPTION PIN NUMBER SYMBOL FUNCTION
1 OE Output enable input (active-Low)
3, 4, 7, 8, 13, 14, 17, D0-D7 Data inputs 2, 5, 6, 9, 12, 15, 16, Q0-Q7 Data outputs
11 CP Clock pulse input (active rising edge)
10 GND Ground (0V)
20 VCC Positive supply voltage
Philips Semiconductors Product specification 74ABT374AOctal D-type flip-flop; positive-edge trigger (3-State)
1995 Sep 06 2
LOGIC SYMBOL (IEEE/IEC) 4 5 7 6 13 12 14 15 17 16 18 19 1 EN SA00112 FUNCTION TABLE INPUTS INTERNAL OUTPUTS OPERATING MODE OE CP Dn INTERNAL REGISTER Q0 – Q7 OPERATING MODE L ↑ l L L Latch and read register L ↑ h H H Latch and read register L ↑ X NC NC Hold H ↑ X NC Z Disable outputs H ↑ Dn Dn Z Disable outputs H = High voltage level h = High voltage level one set-up time prior to the Low-to-High clock transition L = Low voltage level l = Low voltage level one set-up time prior to the Low-to-High clock transition NC= No change X = Don’t care Z = High impedance “off” state ↑ = Low-to-High clock transition = not a Low-to-High clock transition LOGIC DIAGRAM CP Q D CP Q D CP Q D CP Q D CP Q D CP Q D CP Q D CP Q D Q1 Q2 Q3 Q4 Q5 Q6 Q7 CP OE SA00113 3 4 7 8 13 14 17 18 2 5 6 9 12 15 16 19
Philips Semiconductors Product specification 74ABT374AOctal D-type flip-flop; positive-edge trigger (3-State)
1995 Sep 06 3
ABSOLUTE MAXIMUM RATINGS 1, 2 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +7.0 V IIK DC input diode current VI < 0 –18 mA VI DC input voltage3 –1.2 to +7.0 V IOK DC output diode current VO < 0 –50 mA VOUT DC output voltage3 output in Off or High state –0.5 to +5.5 V IOUT DC output current output in Low state 128 mA Tstg Storage temperature range –65 to 150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNITSYMBOL PARAMETER MIN MAX UNIT VCC DC supply voltage 4.5 5.5 V VI Input voltage 0 VCC V VIH High-level input voltage 2.0 V VIL Low-level input voltage 0.8 V IOH High-level output current –32 mA IOL Low-level output current 64 mA Δt/Δv Input transition rise or fall rate 0 10 ns/V Tamb Operating free-air temperature range –40 +85 °C
Philips Semiconductors Product specification 74ABT374AOctal D-type flip-flop; positive-edge trigger (3-State)
1995 Sep 06 4
DC ELECTRICAL CHARACTERISTICS SYMBOL LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25°C Tamb = –40°C to +85°C UNIT MIN TYP MAX MIN MAX VIK Input clamp voltage VCC = 4.5V; IIK = –18mA –0.9 –1.2 –1.2 V VCC = 4.5V; IOH = –3mA; VI = VIL or VIH 2.5 2.9 2.5 V VOH High-level output voltage VCC = 5.0V; IOH = –3mA; VI = VIL or VIH 3.0 3.4 3.0 V VCC = 4.5V; IOH = –32mA; VI = VIL or VIH 2.0 2.4 2.0 V VOL Low-level output voltage VCC = 4.5V; IOL = 64mA; VI = VIL or VIH 0.42 0.55 0.55 V VRST Power-up output low voltage3 VCC = 5.5V; IO = 1mA; VI = GND or VCC 0.13 0.55 0.55 V IOFF Power-off leakage current VCC = 0.0V; VO or VI ≤ 4.5V ±5.0 ±100 ±100 µA IPU /IPD Power-up/down 3-State output current VCC = 0.0V; IO = 1mA; VI = GND or VCC ; V OE = Don’t Care ±5.0 ±50 ±50 µA IOZH 3-State output High currentVCC = 5.5V; VO = 2.7V; VI = VIL or VIH 5.0 50 50 µA IOZL 3-State output Low currentVCC = 5.5V; VO = 0.5V; VI = VIL or VIH –5.0 –50 –50 µA ICEX Output High leakage currentVCC = 5.5V; VO = 0.5V; VI = GND or VCC 5.0 50 50 µA IO Output current1 VCC = 5.5V; VO = 2.5V –50 –100 –180 –50 –180 mA ICCH VCC = 5.5V; Outputs High, VI = GND or VCC 110 250 250 µA ICCL Quiescent supply current VCC = 5.5V; Outputs Low, VI = GND or VCC 24 30 30 mA ICCZ VCC = 5.5V; Outputs 3–State; VI = GND or VCC 110 250 250 µA ΔICC Additional supply current per input pin2 VCC = 5.5V; one input at 3.4V, other inputs at VCC or GND 0.5 1.5 1.5 mA NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. For valid test results, data must not be loaded into the flip-flops (or latches) after applying the power. AC CHARACTERISTICS GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25oC VCC = +5.0V Tamb = -40 to +85oC VCC = +5.0V ±0.5V UNIT Min Typ Max Min Max fMAX Maximum clock frequency 1 200 300 200 ns tPLH tPHL Propagation delay CP to Qn 1 1.7 2.0 3.4 3.8 4.5 4.9 1.7 2.0 5.1 5.2 ns tPZH tPZL Output enable time to High and Low level 1.2 2.2 3.5 4.3 4.5 5.4 1.2 2.2 5.4 6.2 ns tPHZ tPLZ Output disable time from High and Low level 1.8 1.5 3.6 3.0 4.7 4.1 1.8 1.5 5.2 4.3 ns
Philips Semiconductors Product specification 74ABT374AOctal D-type flip-flop; positive-edge trigger (3-State)
1995 Sep 06 5
GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25oC VCC = +5.0V Tamb = -40 to +85oC VCC = +5.0V ±0.5V UNIT Min Typ Min ts(H) ts(L) Setup time, High or Low Dn to CP 2 1.5 1.2 0.6 0.3 1.5 1.2 ns th(H) th(L) Hold time, High or Low Dn to CP 2 1.0 1.0 –0.3 –0.5 1.0 1.0 ns tw (H) tw (L) CP pulse width High or Low 1 2.0 2.8 0.8 1.0 2.0 2.8 ns AC WAVEFORMS VM = 1.5V, VIN = GND to 3.0V VM VM VM VM VM 1/fMAX tw (H) t w (L) tPHL tPLH CP Qn SA00056 Waveform 1. Propagation Delay, Clock Input to Output, Clock Pulse Width, and Maximum Clock Frequency ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ VMDn VM VM VM VM VM CP ts(H) t h(H) t s(L) t h(L) NOTE: The shaded areas indicate when the input is permitted to change for predictable output performance. SA00107 Waveform 2. Data Setup and Hold Times OE VM tPZH tPHZ Qn VM VM SA00066 VOH –0.3V Waveform 3. 3-State Output Enable Time to High Level and Output Disable Time from High Level OE tPZL tPLZ Qn VM VM VM SA00067 VOL +0.3V Waveform 4. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level
Philips Semiconductors Product specification 74ABT374AOctal D-type flip-flop; positive-edge trigger (3-State)
1995 Sep 06 6
7.0V Test Circuit for 3-State Outputs VM VM tW AMP (V) NEGATIVE PULSE 10% 10% 90% 90% VM VM tW AMP (V) POSITIVE PULSE 90% 90% 10% 10% tTHL (tF) tTLH (tR )t THL (tF) tTLH (tR ) VM = 1.5V Input Pulse Definition DEFINITIONS R L = Load resistor; see AC CHARACTERISTICS for value. C L = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. R T = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS FAMILY Amplitude Rep. Rate t W tR tF 74ABT 3.0V 1MHz 500ns 2.5ns 2.5ns SWITCH POSITION TEST SWITCH tPLZ closed tPZL closed All other open SA00012 D.U.T.