74ABT373A PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 11

Technical content

/C0109 /C0110 /C0114 74ABT373A Octal transparent latch (3-State) Product specification 1995 Feb 17 INTEGRATED CIRCUITS IC23 Data Handbook

Philips Semiconductors Product specification 74ABT373AOctal transparent latch (3-State)

21995 Feb 17 853-1454 14852

FEATURES

  • 8-bit transparent latch
  • 3-State output buffers
  • Output capability: +64mA/–32mA
  • Latch-up protection exceeds 500mA per JEDEC Std 17
  • ESD protection exceeds 2000 V per MIL STD 883 Method 3015 and 200 V per Machine Model
  • Power-up 3-State
  • Power-up reset
  • Live insertion/extraction permitted

DESCRIPTION

The 74ABT373A high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The 74ABT373A device is an octal transparent latch coupled to eight 3-State output buffers. The two sections of the device are controlled independently by Enable (E) and Output Enable (OE) control gates. The data on the D inputs are transferred to the latch outputs when the Latch Enable (E) input is High. The latch remains transparent to the data inputs while E is High, and stores the data that is present one setup time before the High-to-Low enable transition. The 3-State output buffers are designed to drive heavily loaded 3-State buses, MOS memories, or MOS microprocessors. The active-Low Output Enable (OE) controls all eight 3-State buffers independent of the latch operation. When OE is Low, the latched or transparent data appears at the outputs. When OE is High, the outputs are in the High-impedance “OFF” state, which means they will neither drive nor load the bus. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS Tamb = 25°C; GND = 0V TYPICAL UNIT tPLH tPHL Propagation delay Dn to Qn C L = 50pF; VCC = 5V 3.2 3.6 ns C IN Input capacitance VI = 0V or VCC 4 pF C OUT Output capacitance Outputs disabled; VO = 0V or VCC 7 pF ICCZ Total supply current Outputs disabled; VCC =5.5V 100 µA

ORDERING INFORMATION

PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 20-Pin Plastic DIP –40°C to +85°C 74ABT373A N 74ABT373A N SOT146-1 20-Pin plastic SO –40°C to +85°C 74ABT373A D 74ABT373A D SOT163-1 20-Pin Plastic SSOP Type II –40°C to +85°C 74ABT373A DB 74ABTD373A B SOT339-1 20-Pin Plastic TSSOP Type I –40°C to +85°C 74ABT373A PW 7ABT373APW DH SOT360-1 PIN CONFIGURATION 10 11 20OE Q3 Q4 GND VCC E SA00059 PIN DESCRIPTION PIN NUMBER SYMBOL FUNCTION

1 OE Output enable input (active-Low)

3, 4, 7, 8, 13, 14, 17, 18 D0-D7 Data inputs 2, 5, 6, 9, 12, 15, 16, 19 Q0-Q7 Data outputs

11 E Enable input (active-High)

10 GND Ground (0V)

20 VCC Positive supply voltage

Philips Semiconductors Product specification 74ABT373AOctal transparent latch (3-State)

1995 Feb 17 3

E SA00060 FUNCTION TABLE INPUTS INTERNAL OUTPUTS OPERATING OE E Dn REGISTER Q0 – Q7 OPERATING MODE L L H H L H L H L H Enable and read register L L l h L H L H Latch and read register L L X NC NC Hold H H L H X Dn NC Dn Z Z Disable outputs H = High voltage level h = High voltage level one set-up time prior to the High-to-Low E transition L = Low voltage level l = Low voltage level one set-up time prior to the High-to-Low E transition NC= No change X = Don’t care Z = High impedance “off” state ↓ = High-to-Low E transition LOGIC SYMBOL (IEEE/IEC) 4 5 7 6 13 12 14 15 17 16 18 19 1 EN SA00061 LOGIC DIAGRAM E Q D EQ D EQ D EQ D EQ D EQ D EQ D EQ D Q1 Q2 Q3 Q4 Q5 Q6 Q7 E OE SA00062 3 4 7 8 13 14 17 18 2 5 6 9 12 15 16 19

Philips Semiconductors Product specification 74ABT373AOctal transparent latch (3-State)

1995 Feb 17 4

ABSOLUTE MAXIMUM RATINGS 1, 2 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +7.0 V IIK DC input diode current VI < 0 –18 mA VI DC input voltage3 –1.2 to +7.0 V IOK DC output diode current VO < 0 –50 mA VOUT DC output voltage3 output in Off or High state –0.5 to +5.5 V IOUT DC output current output in Low state 128 mA Tstg Storage temperature range –65 to 150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNITSYMBOL PARAMETER Min Max UNIT VCC DC supply voltage 4.5 5.5 V VI Input voltage 0 VCC V VIH High-level input voltage 2.0 V VIL Low-level input voltage 0.8 V IOH High-level output current –32 mA IOL Low-level output current 64 mA Δt/Δv Input transition rise or fall rate 0 5 ns/V Tamb Operating free-air temperature range –40 +85 °C

Philips Semiconductors Product specification 74ABT373AOctal transparent latch (3-State)

1995 Feb 17 5

DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25°C Tamb = –40°C to +85°C UNIT Min Typ Max Min Max VIK Input clamp voltage VCC = 4.5V; IIK = –18mA –0.9 –1.2 –1.2 V VCC = 4.5V; IOH = –3mA; VI = VIL or VIH 2.5 2.9 2.5 V VOH High-level output voltageVCC = 5.0V; IOH = –3mA; VI = VIL or VIH 3.0 3.4 3.0 V VCC = 4.5V; IOH = –32mA; VI = VIL or VIH 2.0 2.4 2.0 V VOL Low-level output voltage VCC = 4.5V; IOL = 64mA; VI = VIL or VIH 0.3 0.55 0.55 V VRST Power-up output low voltage3 VCC = 5.5V; IO = 1mA; VI = GND or VCC 0.13 0.55 0.55 V IOFF Power-off leakage currentVCC = 0.0V; VO or VI ≤ 4.5V ±5.0 ±100 ±100 µA IPU /IPD Power-up/down 3-State output current VCC = 2.0V; VO = 0.5V; VOE = Don’t Care V1 = GND or VCC ±5.0 ±50 ±50 µA IOZH 3-State output High currentVCC = 5.5V; VO = 2.7V; VI = VIL or VIH 0.1 50 50 µA IOZL 3-State output Low currentVCC = 5.5V; VO = 0.5V; VI = VIL or VIH –0.1 –50 –50 µA ICEX Output High leakage currentVCC = 5.5V; VO = 5.5V; VI = GND or VCC 5.0 50 50 µA IO Output current1 VCC = 5.5V; VO = 2.5V –50 –100 –180 –50 –180 mA ICCH VCC = 5.5V; Outputs High, VI = GND or VCC 100 250 250 µA ICCL Quiescent supply current VCC = 5.5V; Outputs Low, VI = GND or VCC 24 30 30 mA ICCZ Quiescent su ly current VCC = 5.5V; Outputs 3-State; VI = GND or VCC 100 250 250 µA ΔICC Additional supply current per input pin2 VCC = 5.5V; one input at 3.4V, other inputs at VCC or GND 0.5 1.5 1.5 mA NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. For valid test results, data must not be loaded into the flip-flops (or latches) after applying the power. AC CHARACTERISTICS GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25oC VCC = +5.0V Tamb = -40 to +85oC VCC = +5.0V ±0.5V UNIT Min Typ Max Min Max tPLH tPHL Propagation delay Dn to Qn 2 1.4 1.4 3.2 3.6 4.2 4.7 1.4 1.4 4.7 5.1 ns tPLH tPHL Propagation delay E to Qn 1 1.4 1.9 3.2 3.7 4.2 4.8 1.4 1.9 4.8 5.1 ns tPZH tPZL Output enable time to High and Low level 1.2 2.1 3.1 4.2 4.2 5.2 1.2 2.1 5.1 5.7 ns tPHZ tPLZ Output disable time from High and Low level 1.3 1.2 3.4 3.0 4.6 4.1 1.3 1.2 5.1 4.3 ns

Philips Semiconductors Product specification 74ABT373AOctal transparent latch (3-State)

1995 Feb 17 6

GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25oC VCC = +5.0V Tamb = -40 to +85oC VCC = +5.0V ±0.5V UNIT Min Typ Min ts(H) ts(L) Setup time, High or Low Dn to E 3 1.5 1.0 0.7 0.4 1.5 1.0 ns th(H) th(L) Hold time, High or Low Dn to E 3 1.0 1.0 0.0 –0.5 1.0 1.0 ns tw (H) E pulse width High 1 2.5 1.7 2.5 ns AC WAVEFORMS VM = 1.5V, VIN = GND to 3.0V tw (H) tPHL tPLH E Qn SA00063 VM VM VM VM VM Waveform 1. Propagation Delay, Enable to Output, and Enable Pulse Width VMVM VMVM Qn Dn tPLH tPHL SA00064 Waveform 2. Propagation Delay for Data to Outputs NOTE: The shaded areas indicate when the input is permitted to change for predictable output performance. ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ VMDn VM VM VM VM E ts(H) th(H) ts(L) th(L) SA00065 VM Waveform 3. Data Setup and Hold Times OE VM tPZH tPHZ Qn VM VM SA00066 VOH –0.3V Waveform 4. 3-State Output Enable Time to High Level and Output Disable Time from High Level OE tPZL tPLZ Qn VM VM VM SA00067 VOL +0.3V Waveform 5. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level

Philips Semiconductors Product specification 74ABT373AOctal transparent latch (3-State)

1995 Feb 17 7

7.0V Test Circuit for 3-State Outputs VM VM tW AMP (V) NEGATIVE PULSE 10% 10% 90% 90% VM VM tW AMP (V) POSITIVE PULSE 90% 90% 10% 10% tTHL (tF) tTLH (tR )t THL (tF) tTLH (tR ) VM = 1.5V Input Pulse Definition DEFINITIONS R L = Load resistor; see AC CHARACTERISTICS for value. C L = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. R T = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS FAMILY Amplitude Rep. Rate t W tR tF 74ABT 3.0V 1MHz 500ns 2.5ns 2.5ns SWITCH POSITION TEST SWITCH tPLZ closed tPZL closed All other open SA00012 D.U.T.

Philips Semiconductors Product specification 74ABT373AOctal transparent latch (3-State)

1995 Feb 17 8

DIP20: plastic dual in-line package; 20 leads (300 mil) SOT146-1 SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1

Philips Semiconductors Product specification 74ABT373AOctal transparent latch (3-State)

1995 Feb 17 9

SSOP20: plastic shrink small outline package; 20 leads; body width 5.3 mm SOT339-1

Philips Semiconductors Product specification 74ABT373AOctal transparent latch (3-State)

1995 Feb 17 10

TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1

Philips Semiconductors Product specification 74ABT373AOctal transparent latch (3-State) Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Philips Semiconductors

811 East Arques Avenue

P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 DEFINITIONS Data Sheet Identification Product Status Definition Objective Specification Preliminary Specification Product Specification Formative or in Design Preproduction Product Full Production This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product. Philips Semiconductors and Philips Electronics North America Corporation register eligible circuits under the Semiconductor Chip Protection Act.  Copyright Philips Electronics North America Corporation 1995 All rights reserved. Printed in U.S.A.