74ABT245DB NXP

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

Philips Semiconductors Product data 74ABT245Octal transceiver with direction pin (3-State)

FEATURES

  • Octal bidirectional bus interface
  • 3-State buffers
  • Output capability: +64 mA/–32 mA
  • Latch-up protection exceeds 500 mA per Jedec Std 17
  • ESD protection exceeds 2000 V per MIL STD 833 Method 3015 and 200 V per Machine Model
  • Power-up 3-State
  • Live insertion/extraction permitted
  • Inputs are disabled during 3-State mode

DESCRIPTION

The 74ABT245 high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The 74ABT245 device is an octal transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions. The control function implementation minimizes external timing requirements. The device features an Output Enable (OE ) input for easy cascading and a Direction (DIR) input for direction control. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS Tamb = 25 °C; GND = 0 V TYPICAL UNIT tPLH tPHL Propagation delay An to Bn or Bn to An C L = 50 pF; VCC = 5 V 2.2 2.9 ns C IN Input capacitance DIR, OE VI = 0 V or VCC 4 pF C I/O I/O pin capacitance Outputs disabled; VO = 0 V or VCC 7 pF ICCZ Total supply current Outputs disabled; VCC =5.5 V 50 µA

ORDERING INFORMATION

PACKAGES TEMPERATURE RANGE PART NUMBER DWG NUMBER 20-Pin plastic SO –40 °C to +85 °C 74ABT245D SOT163-1 20-Pin Plastic SSOP Type II –40 °C to +85 °C 74ABT245DB SOT339-1 20-Pin Plastic TSSOP Type I –40 °C to +85 °C 74ABT245PW SOT360-1 PIN CONFIGURATION 10 11 20DIR GND V CC OE SA00121 PIN DESCRIPTION PIN NUMBER SYMBOL NAME AND FUNCTION

1 DIR Direction control input

2, 3, 4, 5, 6, 7, 8, 9 A0 – A7 Data inputs/outputs (A side) 18, 17, 16, 15, 14, 13, 12, 11 B0 – B7 Data inputs/outputs (B side)

19 OE Output enable input (active-LOW)

10 GND Ground (0 V)

20 VCC Positive supply voltage

Philips Semiconductors Product data 74ABT245Octal transceiver with direction pin (3-State) LOGIC SYMBOL OE19DIR SA00122 LOGIC SYMBOL (IEEE/IEC)

3 EN1 (BA)

3 EN2 (AB)

L L An = Bn Inputs L H Inputs Bn = An H X Z Z H = High voltage level L = Low voltage level X = Don’t care Z = High impedance “off” state ABSOLUTE MAXIMUM RATINGS 1, 2 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +7.0 V IIK DC input diode current VI < 0 –18 mA VI DC input voltage3 –1.2 to +7.0 V IOK DC output diode current VO < 0 –50 mA VOUT DC output voltage3 output in Off or High state –0.5 to +5.5 V IOUT DC output current output in Low state 128 mA Tstg Storage temperature range –65 to 150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150 °C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

Philips Semiconductors Product data 74ABT245Octal transceiver with direction pin (3-State) RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNITSYMBOL PARAMETER Min Max UNIT VCC DC supply voltage 4.5 5.5 V VI Input voltage 0 VCC V VIH HIGH-level input voltage 2.0 V VIL LOW-level Input voltage 0.8 V IOH HIGH-level output current –32 mA IOL LOW-level output current 64 mA Δt/Δv Input transition rise or fall rate 0 5 ns/V Tamb Operating free-air temperature range –40 +85 °C DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25 °C Tamb = –40 °C to +85 °C UNIT Min Typ Max Min Max VIK Input clamp voltage VCC = 4.5 V; IIK = –18 mA –0.9 –1.2 –1.2 V VCC = 4.5 V; IOH = –3 mA; VI = VIL or VIH 2.5 2.9 2.5 V VOH High-level output voltageVCC = 5.0 V; IOH = –3 mA; VI = VIL or VIH 3.0 3.4 3.0 V VCC = 4.5 V; IOH = –32 mA; VI = VIL or VIH 2.0 2.4 2.0 V VOL Low-level output voltage VCC = 4.5 V; IOL = 64 mA; VI = VIL or VIH 0.42 0.55 0.55 V II g current Data pins VCC = 5.5 V; VI = GND or 5.5 V ±5 ±100 ±100 µA IOFF Power-off leakage currentVCC = 0.0 V; VI or VO ≤ 4.5 V ±5.0 ±100 ±100 µA IPU /IPD Power-up/down 3-State output current3 VCC = 2.0 V; VO = 0.5 V; VI = GND or VCC ; VOE = Don’t care ±5.0 ±50 ±50 µA IIH + IOZH 3-State output High currentVCC = 5.5 V; VO = 2.7 V; VI = VIL or VIH 5.0 50 50 µA IIL + IOZL 3-State output Low currentVCC = 5.5 V; VO = 0.5 V; VI = VIL or VIH –5.0 –50 –50 µA ICEX Output high leakage currentVCC = 5.5 V; VO = 5.5 V; VI = GND or VCC 5.0 50 50 µA IO Output current1 VCC = 5.5 V; VO = 2.5 V –40 –100 –180 –40 –180 mA ICCH VCC = 5.5 V; Outputs HIGH; VI = GND or VCC 50 250 250 µA ICCL Quiescent supply current VCC = 5.5 V; Outputs LOW; VI = GND or VCC 24 30 30 mA ICCZ VCC = 5.5 V; Outputs 3-State; VI = GND or VCC 50 250 250 µA Outputs enabled, one input at 3.4 V, other inputs at V CC or GND; VCC = 5.5 V 0.5 1.5 1.5 mA ΔICC Additional supply current per input pin Outputs 3-State, one data input at 3.4 V, other inputs at V CC or GND; VCC = 5.5 V 50 250 250 µA Outputs 3-State, one enable input at 3.4 V, other inputs at V CC or GND; VCC = 5.5 V 0.5 1.5 1.5 mA NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4 V. 3. This parameter is valid for any VCC between 0 V and 2.1 V with a transition time of up to 10 msec. For VCC = 2.1 V to VCC = 5 V/C003410%, a transition time of up to 100 µsec is permitted.

Philips Semiconductors Product data 74ABT245Octal transceiver with direction pin (3-State) AC CHARACTERISTICS GND = 0 V; tR = tF = 2.5 ns; CL = 50 pF, RL = 500 Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25 °C VCC = +5.0 V Tamb = –40 °C to +85 °C VCC = +5.0 V ±0.5 V UNIT Min Typ Max Min Max tPLH tPHL Propagation delay An to Bn or Bn to An 1 1.0 1.0 2.2 2.9 4.1 4.2 1.0 1.0 4.6 4.6 ns tPZH tPZL Output enable time to HIGH and LOW level 2 1.3 2.3 3.0 4.0 4.8 5.8 1.3 2.3 5.3 6.3 ns tPHZ tPLZ Output disable time from HIGH and LOW Level 2 1.0 1.0 4.7 4.1 6.2 5.8 1.0 1.0 7.2 6.3 ns AC WAVEFORMS VM = 1.5V, VIN = GND to 3.0V An or Bn INPUT VM VM Bn or An OUTPUT VM VM tPLH tPHL SA00124 Waveform 1. Waveforms showing the input to output propagation delays nOE INPUT OUTPUT OUTPUT VM VM tPZH tPHZ VOH VM VM VOL tPZL tPLZ 3.5V VOL + 0.3V VOH – 0.3V SA00024 Waveform 2. Waveforms showing the 3-State Output Enable and Disable times TEST CIRCUIT AND WAVEFORMS C L = 50 pF 500 Ω Load Circuit DEFINITIONS C L = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. TEST S1 tpd open tPLZ /tPZL 7 V tPHZ /tPZH open SA00012 500 ΩFrom Output Under Test 7 V Open GND