74ABT240 PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 5
Technical content
Philips Semiconductors Product specification 74ABT240Octal inverting buffer (3-State)
21996 Sep 10 853–1608 17274
FEATURES
- Octal bus interface
- 3-State buffers
- Output capability: +64mA/–32mA
- Latch-up protection exceeds 500mA per Jedec Std 17
- ESD protection exceeds 2000 V per MIL STD 883 Method 3015 and 200 V per Machine Model
- Power-up 3-State
- Live insertion/extraction permitted
DESCRIPTION
The 74ABT240 high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The 74ABT240 device is an octal inverting buffer that is ideal for driving bus lines. The device features two Output Enables (1OE, 2OE ), each controlling four of the 3-State outputs. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS Tamb = 25°C; GND = 0V TYPICAL UNIT tPLH tPHL Propagation delay nAx to nYx C L = 50pF; VCC = 5V 3.1 ns C IN Input capacitance VI = 0V or VCC 4 pF C OUT Output capacitance Outputs disabled; VO = 0V or VCC 7 pF ICCZ Total supply current Outputs disabled; VCC =5.5V 50 µA
ORDERING INFORMATION
PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 20-Pin Plastic DIP –40°C to +85°C 74ABT240 N 74ABT240 N SOT146-1 20-Pin plastic SO –40°C to +85°C 74ABT240 D 74ABT240 D SOT163-1 20-Pin Plastic SSOP Type II –40°C to +85°C 74ABT240 DB 74ABT240 DB SOT339-1 20-Pin Plastic TSSOP Type I –40°C to +85°C 74ABT240 PW 74ABT240PW DH SOT360-1 PIN DESCRIPTION PIN NUMBER SYMBOL NAME AND FUNCTION 2, 4, 6, 8 1A0 – 1A3 Data inputs 11, 13, 15, 17 2A0 – 2A3 Data inputs 18, 16, 14, 12 1Y0 – 1Y3 Data outputs 9, 7, 5, 3 2Y0 – 2Y3 Data outputs 1, 19 1OE , 2OE Output enables
10 GND Ground (0V)
20 VCC Positive supply voltage
Philips Semiconductors Product specification 74ABT240Octal inverting buffer (3-State)
1996 Sep 10 3
H = High voltage level L = Low voltage level X = Don’t care Z = High impedance ”off” state LOGIC SYMBOL (IEEE/IEC) EN1 2 18 4 16 6 14 8 12 11 9 13 7 15 5 17 3 EN SA00036 ABSOLUTE MAXIMUM RATINGS 1, 2 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +7.0 V IIK DC input diode current VI < 0 –18 mA VI DC input voltage3 –1.2 to +7.0 V IOK DC output diode current VO < 0 –50 mA VOUT DC output voltage3 output in Off or High state –0.5 to +5.5 V IOUT DC output current output in Low state 128 mA Tstg Storage temperature range –65 to 150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
Philips Semiconductors Product specification 74ABT240Octal inverting buffer (3-State)
1996 Sep 10 4
RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNITSYMBOL PARAMETER Min Max UNIT VCC DC supply voltage 4.5 5.5 V VI Input voltage 0 VCC V VIH High-level input voltage 2.0 V VIL Low-level Input voltage 0.8 V IOH High-level output current –32 mA IOL Low-level output current 64 mA Δt/Δv Input transition rise or fall rate 0 10 ns/V Tamb Operating free-air temperature range –40 +85 °C DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25°C Tamb = –40°C to +85°C UNIT Min Typ Max Min Max VIK Input clamp voltage VCC = 4.5V; IIK = –18mA –0.9 –1.2 –1.2 V VCC = 4.5V; IOH = –3mA; VI = VIL or VIH 2.5 2.9 2.5 V VOH High-level output voltageVCC = 5.0V; IOH = –3mA; VI = VIL or VIH 3.0 3.4 3.0 V VCC = 4.5V; IOH = –32mA; VI = VIL or VIH 2.0 2.4 2.0 V VOL Low-level output voltage VCC = 4.5V; IOL = 64mA; VI = VIL or VIH 0.42 0.55 0.55 V IOFF Power-off leakage currentVCC = 0.0V; VI or VO ≤ 4.5V; ±5.0 ±100 ±100 µA IPU /IPD Power-up/down 3-state output current3 VCC = 2.1V; VO = 0.5V; VI = GND or VCC ; V OE = Don’t care ±5.0 ±50 ±50 µA IOZH 3-State output High currentVCC = 5.5V; VO = 2.7V; VI = VIL or VIH 5.0 50 50 µA IOZL 3-State output Low currentVCC = 5.5V; VO = 0.5V; VI = VIL or VIH –5.0 –50 –50 µA ICEX Output High leakage currentVCC = 5.5V; VO = 5.5V; VI = GND or VCC 5.0 50 50 µA IO Output current1 VCC = 5.5V; VO = 2.5V –50 –100 –180 –50 –180 mA ICCH VCC = 5.5V; Outputs High, VI = GND or VCC 50 250 250 µA ICCL Quiescent supply current VCC = 5.5V; Outputs Low, VI = GND or VCC 24 30 30 mA ICCZ VCC = 5.5V; Outputs 3-State; VI = GND or VCC 50 250 250 µA ΔICC Additional supply current per input pin2 Outputs 3-State, one input at 3.4V, other inputs at VCC or GND; VCC = 5.5V 0.5 1.5 1.5 mA NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. This parameter is valid for any VCC between 0V and 2.1V, with a transition time of up to 10msec. From VCC = 2.1V to VCC 5V ± 10% a transition time of up to 100µsec is permitted.
Philips Semiconductors Product specification 74ABT240Octal inverting buffer (3-State)
1996 Sep 10 5
GND = 0V; tR = tF = 2.5ns; CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25°C VCC = +5.0V Tamb = –40°C to +85°C VCC = +5.0V ±0.5V UNIT Min Typ Max Min Max tPLH tPHL Propagation delay nAx to nYx 1 1.0 1.6 2.7 3.5 4.1 4.3 1.0 1.6 4.8 4.8 ns tPZH tPZL Output enable time to High and Low level 2 1.1 1.1 3.1 4.2 4.7 5.8 1.1 1.1 5.2 6.2 ns tPHZ tPLZ Output disable time from High and Low level 2 1.8 1.6 3.7 3.0 5.7 5.4 1.8 1.6 6.4 5.8 ns AC WAVEFORMS VM = 1.5V, VIN = GND to 3.0V nAx INPUT VM VMnYx OUTPUT VM VM tPHL tPLH SA00037 Waveform 1. Waveforms Showing the Input (nAx) to Output (nYx) Propagation Delays nOE INPUT VM VM tPZH tPHZ nYx OUTPUT VOH VM VMnYx OUTPUT VOL tPZL tPLZ 3.5V VOL + 0.3V VOH – 0.3V SA00017 Waveform 2. Waveforms Showing the 3-State Output Enable and Disable Times
Philips Semiconductors Product specification 74ABT240Octal inverting buffer (3-State)
1996 Sep 10 6
TEST CIRCUIT AND WAVEFORMS PULSE GENERATOR R T VIN VOUT C L R L VCC R L 7.0V Test Circuit for 3-State Outputs VM VM tW AMP (V) NEGATIVE PULSE 10% 10% 90% 90% VM VM tW AMP (V) POSITIVE PULSE 90% 90% 10% 10% tTHL (tF) tTLH (tR ) t THL (tF) tTLH (tR ) VM = 1.5V Input Pulse Definition DEFINITIONS R L = Load resistor; see AC CHARACTERISTICS for value. C L = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. R T = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS FAMILY Amplitude Rep. Rate t W tR tF 74ABT 3.0V 1MHz 500ns 2.5ns 2.5ns SWITCH POSITION TEST SWITCH tPLZ closed tPZL closed All other open SA00012 D.U.T.